Abstract:A fast liquid mixing process was implemented by the cross-flow impingement of thin liquid sheets in the confined mixing channels with the width of millimeter(s). The species transport between the two liquids was studied by visualizing the 2-D concentration field of Rhodamine dye with the planar laser induced fluorescence (PLIF) technique, on which the intensity of segregation (IOS) and the 95% mixing time (τ95) were calculated to evaluate the mixing quality. Due to the reduced spatial scale of liquid mixing and the high energy dissipation rate of ∼1000 to ∼10000W/kg produced by the strong impingement between the liquid sheets, fast mixing of liquids was achieved at a time scale of milliseconds. The effects of operating conditions and the mixer geometry on the mixing behavior were investigated comprehensively by both experiments and computational fluid dynamics (CFD) simulations. Good agreement of the CFD predictions with the experimental data was obtained by the k–ɛ model with species transport, where dependence of the CFD predictions on the turbulent Schmidt number (i.e. Sct) was discussed in detail. The results show that for this turbulence-induced mixing procedure the momentum ratio and the cross-flow angle between the two liquids play significant roles in the mixing efficiency. The absolute liquid velocity has little effect on the species transport in space, i.e. the mixing distance to reach IOS of 5%. Nevertheless, the mixing time is shortened at higher velocity conditions. The fluctuation of the transient concentration signals shows stronger interaction at the interface between the two liquid sheets. And the local concentration fluctuations can be well described by the β-PDF (probability density function) model.

Measurement of Temperature Field in a Fast Liquid-Liquid Mixing Process by PLIF

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Study of Fast Liquid-Liquid Micromixing Using PLIF Technique

Millisecond Mixing of Two Liquid Streams in a Mixer Model

Fast liquid mixing by cross-flow impingement in millimeter channels

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Mass Transfer Characterization for Hydrocarbon Liquid–particle Collision Based on Sensitive Tracing of Fluorescent Probe

Simultaneous Measurements of Velocity and Concentration Fields in an Inclined Jet in Crossflow

A New Void Fraction Measurement Method for Gas-Liquid Two-Phase Flow in Small Channels.

Measurement System for Characterization of Gas-Liquid Two-Phase Flow in Micro-Channel

Study on the mixing behavior of thin liquid-sheet impinging jets using the PLIF technique

Simultaneous temperature and thickness measurements of falling liquid films by laser-induced fluorescence

Study on the reactive mixing process in an unbaffled stirred tank using planar laser-induced fluorescence (PLIF) technique

Application of laser-induced fluorescence technique in visualization of liquid mixing process

Fast Liquid Jet Mixing in Millimeter Channels with Various Multislits Designs

Visualization of Gas-Liquid Mass Transfer and Reaction Using Laser Induced Fluorescence Technique

Visualization of reactive and non-reactive mixing processes in a stirred tank using planar laser induced fluorescence (PLIF) technique

Study on the Measurement of Temperature Field Using Laser Holographic Interferometry

Experimental study of reactive mixing in a mini-scale mixer by laser-induced fluorescence technique

Whole field measurement of temperature in water using two-color laser induced fluorescence

Experimental Study of Mass Transfer in Water/ionic Liquid Microdroplet Systems Using Micro-Lif Technique