Abstract:Brillouin-based optical fiber sensing has gained considerable attention for the past few years thanks to its ability to offer distributed sensing. The major limitation of a Brillouin-based optical fiber sensor is its complexity because a time-consuming frequency-sweeping process is needed to obtain a local Brillouin gain spectrum (BGS) and to calculate the local Brillouin frequency shift (BFS). Thus, it is only suitable for static or slow-varying measurements. In this article, we propose an approach to achieve truly distributed and ultra-fast fiber-optic sensing based on an active and distributed bandpass microwave photonic filter (MPF) through stimulated Brillouin scattering (SBS). To obtain a truly distributed BFS, a counter-propagating single-shot pump pulse is launched into the fiber link and a microwave multi-tone (MMT) signal with a random initial phase distribution which is phase modulated on an optical carrier is launched into the fiber link from the other end. Due to the SBS effect, the -1st order sideband of the phase-modulated signal will experience Brillouin amplification while the +1st order sideband will experience Brillouin attenuation, and the phase-modulated signal is converted to an intensity-modulated signal. The entire operation is equivalent to a bandpass MPF. By detecting the optical signal at a photodetector (PD), a regenerated MMT signal with its magnitude and phase that are shaped by the MPF is obtained. By evaluating the regenerated MMT signal, the Brillouin information corresponding to the temperature or strain change at a specific location is revealed. The major advantage of the approach is that time-consuming frequency-sweeping process is avoided. Truly distributed strain, temperature, and vibration sensing with a 2 m spatial resolution over 49.5 m distance at a speed up to 83.3 kHz is experimentally demonstrated.

A Photonic Approach for Microwave/millimeter-Wave Frequency Measurement Using Stimulated Brillouin Scattering in Single Mode Fiber

Fiber Stimulated Brillouin Scattering-Based Microwave Signal Processing

Broadband Instantaneous Frequency Measurement Based on Stimulated Brillouin Scattering

Application of Stimulated Brillouin Scattering in Synthetic Aperture Passive Millimeter Wave Imaging

High-Resolution Multiple Microwave Frequency Measurement Based on Stimulated Brillouin Scattering

Photonic Generation of Microwave/millimeter‐wave Sources Without Cavity or Modulation Using Fiber Stimulated Brillouin Scattering

Truly Distributed and Ultra-Fast Microwave Photonic Fiber-Optic Sensor

Photonic Instantaneous Measurement of Microwave Frequency Using Fiber Bragg Grating

Instantaneous Microwave Frequency Measurement with a Uniform Resolution and Improved Dynamic Range

Photonic measurement of microwave frequency based on phase modulation.

Microwave Frequency Measurement Based on Phase Modulation to Intensity Modulation Conversion Using Fiber Bragg Grating

Ultrabroad Brillouin Instantaneous Frequency Measurement with a Designed Linear System Response.

Time-frequency analysis of microwave signals based on stimulated Brillouin scattering

Multiple microwave frequencies measurement based on stimulated Brillouin scattering with improved measurement range.

An Optical Millimeter-Wave Generation Technique Based on Phase Modulation and Brillouin-Assisted Notch-Filtering

Functional Flexible Photonics-Assisted Frequency Measurement Based on Combination of Stimulated Brillouin Scattering and a Mach – Zehnder Interferometer

Photonic Instantaneous Microwave Frequency Measurement Based on Two Different Phase Modulation to Intensity Modulation Conversions

A Photonic Approach to Microwave/Millimeter-Wave Frequency Measurement with Extended Range Based on Phase Modulation

SBS-Based Fiber Optical Sensing Using Frequency-Domain Simultaneous Tone Interrogation

A photonic approach to broadband microwave frequency measurement

High resolution optical spectrum measurement based on stimulated Brillouin scattering using DFB lasers