Abstract:In modern radar systems and electronic warfare systems, instantaneous microwave frequency measurement (IFM) is widely used for detecting and roughly classifying unknown signals. However, conventional electrical approaches realizing IFM have hit the bottleneck of limitation in measurement range due to the limited bandwidth of the electronic components. Photonics-based approaches for microwave spectrum analysis are considered to be competitive alternatives because of the advantages such as wide instantaneous bandwidth, low loss and immunity to electromagnetic interference. In the past decades, a few methods of photonic approaches have been proposed. A tunable fiber Fabry-Perot interferometer (FFP)1 and a fiber Bragg grating2 used as an optical scanning receiver were reported, but the response time is long due to the piezoelectric ceramics (PZT) or electric heating driven systems, the scanning speed is only 200 Hz 2. IFM based on frequency-amplitude mapping technique was previously demonstrated.3, 4 However, the measurement range is limited to about 20 GHz and the accuracy varies in the whole range. In recent years, frequency measurement based on stimulated Brillouin scattering (SBS) with high resolution was reported,5, 6 but the existence of a scanning microwave signal source made the system complex and the response time is depended on the sweeping speed of the local oscillator, which is of the order of milliseconds. In Ref. 7, a system integrating SBS and a frequency shifting recirculating delay line (FS-RDL) was demonstrated. The sweeping time is about hundreds of microseconds, but there is a trade-off between sweeping time and measurement range. Measurement period of 5 s in 20 GHz range has been realized by channelized radio frequency measurement scheme.8 However, the implementation of an analog-to-digital converter with bandwidth of 2 GHz made the system complex and costly. In this work, a novel approach of ultrafast frequency measurement based on electro-optic Fabry-Perot (EOFP) scanning receiver is proposed for the first time. In comparison with other frequency scanning measurement systems, which use methods such as mechanical tuning, electric heating, scanning microwave signal, FS-RDL, etc., our double-EOFP system can measure signals with frequency under 54 GHz in 2 s, which is the fastest scanning rate as far as we know.

Functional Flexible Photonics-Assisted Frequency Measurement Based on Combination of Stimulated Brillouin Scattering and a Mach – Zehnder Interferometer

Functional Flexible Photonics-Assisted Frequency Measurement Based on Polarization Multiplexing and Coarse/accurate Compensation

Thin‐Film‐Lithium‐Niobate Photonic Chip for Ultra‐Wideband and High‐Precision Microwave Frequency Measurement

High-accuracy Photonics-assisted Frequency Measurement With Rough-accurate Compensation Based on Mach-Zehnder Interfering and Power Cancellation

Analysis and Optimization of Instantaneous Frequency Measurement System Based on Polarization Time Delay Interference

High-Resolution Multiple Microwave Frequency Measurement Based on Stimulated Brillouin Scattering

Microwave Instantaneous Frequency Measurement Based on Single Lightpath Polarization Multiplexing

A Photonic Approach for Microwave/millimeter-Wave Frequency Measurement Using Stimulated Brillouin Scattering in Single Mode Fiber

Ultrafast Microwave Frequency Measurement Based on Electro-Optic Tunable Fabry-Perot Etalon

Photonic Remote Microwave Frequency Measurement with a Tunable Measurement Range Based on Dispersion Compensation Technology

A Photonic Approach to Microwave/Millimeter-Wave Frequency Measurement with Extended Range Based on Phase Modulation

Photonic-assisted microwave frequency measurement with higher resolution and tunable range.

Broadband Instantaneous Multi-Frequency Measurement Based on a Fourier Domain Mode-Locked Laser

Photonics-Based Instantaneous Multi-Parameter Measurement of a Linear Frequency Modulation Microwave Signal

High-Precision Photonics-Assisted Two-Step Microwave Frequency Measurement Combining Time and Power Mapping Method

A MZI-based photonic instantaneous microwave frequency measurement simplified by an optical polarizer

A Scalable Instantaneous Frequency Measurement System Based on Single Branch AC/DC Detection

Instantaneous Frequency Measurement Using Photonics-Assisted Broadband Signal Generation and Processing

Photonic Instantaneous Frequency Measurement Of Wideband Microwave Signals

Photonic Instantaneous Microwave Frequency Measurement with Adjustable Measurement Range Based on an Electro-Optical Polarization Modulator

Microwave Frequency Measurement System Using Fixed Low Frequency Detection Based on Photonic Assisted Brillouin Technique