Abstract:<p>Cutting force provides a basis for predicting tool wear and fracture, surface quality of component, as well as vibration and power demand of machine tools during the process of turning. Based on the finite element and mechanical analysis model, a three-dimensional (3-D) cutting force prediction model with consideration given to the edge radius and the nose radius of cutting tool is proposed in this paper. Firstly, combined with cutting force experiment, 3-D cutting simulation is performed in Deform to determine the appropriate Johnson-Cook (J-C) material constitutive model, and the two-dimensional (2-D) orthogonal cutting model is simulated by applying the determined J-C model. By observing the strain rate distribution in the shear zone, the shear angle is obtained, while the nonlinear regression model of shear angle, cutting speed and cutting thickness is conducted. Then, taking into account the impact of nose radius on the cutting process, 3-D oblique cutting is converted into equivalent orthogonal cutting using the chip flow angle and the equivalent cutting edge. The method used to determine the strain rate coefficient of the second deformation zone is redefined in the modified Oxley model, and the chip forming force is calculated. Based on the Waldorf slip line field model, the plowing force generated by the edge radius is predicted. Finally, the cutting force of 3-D oblique turning is obtained by means of coordinate transformation. The proposed model is validated by the excellent consistency between the theoretical predictions and the results obtained after referencing literature data and performing experiment of cutting 304 stainless steel and Inconel 718.</p>

Extended Octree for Cutting Force Prediction

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

Inverse model of the cutting forces prediction in orthogonal cutting

Three-dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

Stochastic Cutting Force Modeling and Prediction in Machining

A New Method for Cutting Force Prediction in Peripheral Milling of Complex Curved Surface

Force prediction in ultrasonic vibration-assisted milling

An accurate prediction method of cutting forces in 5-axis flank milling of sculptured surface

Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Mechanistic Modeling of Five-Axis Machining with a General End Mill Considering Cutter Runout

Predictive 3D modelling of free oblique cutting introducing an ANN-based material flow law with experimental validation over a wide range of conditions

High-accurate Cutting Forces Estimation by Machine Learning with Voice Coil Motor-Driven Fast Tool Servo for Micro/nano Cutting

Modeling of Cutting Forces During Machining

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Cutting force prediction based on a curved uncut chip thickness model

A Cutting Force Model for a Waved-Edge End Milling Cutter