Abstract:The interactions between the emission of Volatile Organic Compounds (VOCs) and airflow play a key role in determining indoor pollutant concentrations. In the framework of Indoor Air Quality (IAQ) prediction, numerical models based on fluid dynamics are useful tools to address typical cases and then make decisions to improve both public and occupational health. This requires an accurate description of VOC emission processes from building materials, products and furniture, taking into account the diffusion of VOCs into these materials instead of using constant surface emission rates. A predictive model combining Computational Fluid Dynamics (CFD) for airflow and kinetics modelling for VOC emissions is described. The validation of airflow and VOC transfer models is carried out by comparing experimental and simulation results into a 128 L ventilated experimental chamber. Our results show that the Reynolds-Averaged Navier Stokes (RANS) approach, together with a standard k-ω turbulence model, provide good agreement between numerical and experimental airflows regarding both air velocity and age of air profiles. The overall VOC dynamics is also reproduced by numerical simulation for the eight VOCs monitored. The predicted absolute VOC concentrations are in agreement with experimental data for acetone, formaldehyde, hexanal and terpenes. However, numerical simulations underestimate the concentration of pentanal, propanal, butanal, acetaldehyde, which is discussed in terms of representativeness of emission parameters. Our results highlight that CFD simulations combined with VOC emission kinetics modelling is a promising tool for IAQ prediction, but it requires further investigation to fully understand the observed behaviour for some VOCs. This finally demonstrates the crucial need of tracking various VOCs simultaneously in the framework of assessing an IAQ prediction model.

Study on CFD Numerical Simulation on Technological Process of Bake out Method Coupled with Intermittent Ventilation

Optimization of Local Ventilation System for Gaseous Pollutants Removal in Broiler House Using CFD Simulation

Study and optimization on characteristics of temperature field in forced convection oven

Simulation Analysis and Experimental Research on Complex Structure Processing Technology of Fan Vent

Numerical Study On Indoor Air Distribution For Vav System

Control of volatile organic compounds indoors—Development of an integrated mass-transfer-based model and its application

Review of Numerical Simulation Method and Software for Indoor Volatile Organic Compounds (VOCs)

Numerical Simulation of Asphalt Pavement Temperature Distribution in Long Tunnel Fires

Study on the optimization of temperature uniformity in the oven under the forced convection mode

Experimental assessment of modelling VOC emissions from particleboard into a ventilated chamber

A Pre-Assessment and Pollution Prevention Tool for Indoor Volatile Organic Compound Simulations During the Interior Design Stage

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation

An Experimental Study on Temperature, Relative Humidity, and Concentrations of CO and CO2 during Different Cooking Procedures

Numerical simulation and optimization of the multi-stage air/gas supply system in a coke oven battery with 7.1 m coking chambers

Performance of three air distribution systems in VOC removal from an area source

Numerical Simulation of Indoor Concentration Change of Carbon Dioxide Dispersion under Natural Ventilation Condition

Numerical Study of the Combustion Process in the Vertical Heating Flue of Air Staging Coke Oven

An improved mass transfer based model for analyzing VOC emissions from building materials

Early-Stage Emissions of Formaldehyde and Volatile Organic Compounds from Building Materials: Model Development, Evaluation, and Applications.

Make-up Air Optimization and Demand Exhaust Rate of Commercial Kitchens under Multiple Cookers Operation

Numerical simulation of VOC emissions from dry materials