Abstract:One of the important failure criteria of press operations in industry for forming simulations is the Forming Limit Diagram (FLD). The complex loading effects on FLD, in particular the localized necking phenomenon under stretch-bending condition, have not been fully investigated and well understood. In practical sheet metal applications, the deformation is invariably three dimensional with a combination of stretching and bending. For most sheet materials under these complex loading processes used in industry, strong Bauschinger effect is observed, and the material hardening behavior tends to be anisotropic. This study aims to understand and evaluate such anisotropic hardening effect on the forming limit prediction under stretch-bending condition. The extended through-thickness Marciniak–Kuczynski (M–K) analysis is incorporated with Yoshida–Uemori (YU) two-surface kinematic hardening constitutive model, which has a more accurate description of the reverse loading behavior than that of the conventional isotropic hardening model. The material parameters used in this paper for YU model are calibrated with the experimental data from uniaxial large-strain tension-compression cyclic test. Both the isotropic hardening and YU kinematic hardening models with Hill'48 yield surface are employed in the analysis for the purpose of comparison. The Forming Limit Average Stress Diagram (FLASD) under stretch-bending condition is proposed to extend the understanding of Forming Limit Stress Diagram (FLSD) from in-plane to out-of-plane deformations. The “bending-ratio-dependent” phenomenon in forming limit diagram is predicted and observed in both stress/strain space with the proposed method. It suggests that the individual stress/strain state cannot represent system behavior. Forming limits under stretch-bending is suggested as an occurrence of system instability, not individual material instability. The system behavior of sheet metal deformation is reinforced as critical to the understanding of necking instability in stretch bending processes. The analysis shows that the Bauschinger effect provides positive effect in delaying the necking instability, predicting higher formability for sheet metals under stretch-bending. The insight obtained in this paper provides further understanding of the localized necking phenomenon under stretch-bending condition.

Microbending Moment of Brass Foils Based on Strain Gradient Hardening Model

Analysis of Microbending of CuZn37 Brass Foils Based on Strain Gradient Hardening Models

Material Intrinsic Length in Plastic Strain Gradient Theory and Microbending Process of Metal Foils

Determination of Material Intrinsic Length and Strain Gradient Hardening in Microbending Process

Size Effect on Springback Behavior Due to Plastic Strain Gradient Hardening in Microbending Process of Pure Aluminum Foils

Size Effects of CuZn37 Brass Foil in Microforming

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

Micro-bending of Metallic Crystalline Foils by Non-Local Dislocation Density Based Crystal Plasticity Finite Element Model

On energetic and dissipative gradient effects within higher-order strain gradient plasticity: Size effect, passivation effect, and Bauschinger effect

Effect of Thickness and Grain Size on Material Behavior in Micro-Bending

Investigation of Size Effects of 304 Stainless Steel Foils in Microforming Processes

Strain hardening in bent copper foils

The Experimental and Numerical Investigation on the Mechanical Properties of Metallic Foil

Bending Properties and Deformation Micromechanisms of Near-Α Titanium Alloy Sheets/foils Considering Initial Texture Characteristics and Size Effect

Sheet metal forming limits under stretch-bending with anisotropic hardening

Development of a new model for plane strain bending and springback analysis

Mathematical modeling of plane-strain bending of sheet and plate

Modeling of Surface Layer and Strain Gradient Hardening Effects on Micro-Bending of Non-oriented Silicon Steel Sheet

Coupling Effect of Strain Gradient Strengthening and Thermal Softening on the Microscale Plastic Behavior of Metallic Materials

Predicting Plastic Behavior of Magnesium Alloy Tube Bending with Comprehensive Constitutive Models

Anisotropic plasticity deformation during micro-deep drawing of 304 foils: An experimental and numerical investigation