Abstract:In the context of Oxy-fuel combustion, there is a strong industrial interest in highly fuel-rich flames, characterized by an equivalence ratio (Φ) exceeding 2.5, for the production of H 2 -CO-rich synthesis gas. The validation of existing chemical reaction mechanisms for this specific regime pose a significant challenge due to the scarcity of experimental data for this particular range of equivalence ratio. The scope of this study was therefore the determination of the laminar burning velocity s L of ultra-rich CH 4 -O 2 flames under varying conditions, such as high equivalence ratios and preheating temperatures using the heat flux burner method. The laminar burning velocity was determined for equivalence ratio within the range of 2.3 < Φ < 3.6 and preheating temperature ranging from 300 K to 455 K. Additionally, the impact of the of reducing the oxygen content in the oxidizer on s L was investigated by argon addition in molar percentages ranging from 40 % to 100 %. The results of our study reveal laminar burning velocities ranging from 5 cm/s to 45 cm/s for pure oxy-fuel CH 4 flames. Preheating is shown to increase s L and this effect can be represented by a power law correlation s L = s L,0 (T/T 0 ) α with α = 1.53. Furthermore, the dilution of the oxidizer with argon leads to a significant decrease in s L of approximately 50 % compared to pure oxy-fuel flames. It is worth noting that detailed reaction mechanisms in combination with molecular transport data are typically not validated within the selected equivalence ratio range. To assess the performance of such reaction schemes in predicting laminar burning velocity under the specified selected conditions, we evaluated 13 different reaction mechanisms sourced from the literature. We compared the laminar burning velocities obtained through calculations of laminar premixed 1D flames and, additionally compared these with experimental data. A sensitivity analysis of the laminar burning velocity were carried out for selected mechanisms. Among the mechanisms, the CalTech2.3 mechanism exhibited the most consistent and accurate performance, particularly at high equivalence ratios.

Experimental and numerical determination of laminar flame speeds of methane/(Ar, N2, CO2)-air mixtures as function of stoichiometry, pressure, and flame temperature

Laminar flame speeds of methane-air mixtures under reduced and elevated pressures

Experimental and numerical determination of laminar flame speeds: Mixtures of C2-hydrocarbons with oxygen and nitrogen

A Comparison Between Direct Numerical Simulation and Experiment of the Turbulent Burning Velocity-Related Statistics in a Turbulent Methane-Air Premixed Jet Flame at High Karlovitz Number

A numerical study of counterflow diffusion flames of methane/air at various pressures

Experimental determination of counterflow ignition temperatures and laminar flame speeds of C2–C3 hydrocarbons at atmospheric and elevated pressures

Investigation of laminar flame speeds of CH 4 /O 2 /CO 2 mixtures at ordinary pressure and kinetic simulation

Experiments and Numerical Simulation on the Laminar Flame Speeds of Dichloromethane and Trichloromethane

Flame propagation and counterflow nonpremixed ignition of mixtures of methane and ethylene

Structure and Laminar Flame Speed of an Ammonia/Methane/Air Premixed Flame under Varying Pressure and Equivalence Ratio

Laminar Flame Speed of Methane/Air at Engine-Relevant Conditions: Performance of Different Mechanisms

Experimental and numerical investigations of the laminar burning velocities of premixed fuel-rich methane oxy-fuel and oxygen-enhanced flames

Laminar Flame Speed of Lean Premixed H2/CO/Air Flames

Laminar Flame Speed of CO2 and N2 Diluted H2/CO/air Flames

On the accuracy of laminar flame speeds measured from outwardly propagating spherical flames: Methane/air at normal temperature and pressure

Laminar flame speeds of methane/air mixtures at engine conditions: Performance of different kinetic models and power-law correlations

High-pressure Laminar Flame Speeds and Kinetic Modeling of Carbon Monoxide/hydrogen Combustion

Adiabatic Laminar Burning Velocities of C3H8-O2-CO2 and C3H8-O2-N2 Mixtures at Ambient Conditions-Part I: Experimental and Numerical Study

Inert Gas Influence on Propagation Velocity of Methane-air Laminar Flames

Laminar flame speed studies of lean premixed H 2 /CO/air flames

Experimental and Numerical Study of the Laminar Burning Velocity and Pollutant Emissions of the Mixture Gas of Methane and Carbon Dioxide