Abstract:The absorption heat exchanger with a large temperature difference has a higher heat transfer superiority than the other heat exchangers (including plate heat exchanger), which is more suitable for long-distance heating. To improve its system performance, parameter collaborative optimization (including building accurate predictive models) has become an effective method because it does not require too much investment. In this study, a heat exchange station was chosen as a case study, and a model of a long short-term memory (LSTM) neural network was used to predict the temperatures of primary return water and secondary return water. Accordingly, the reliability of the fitting result based on the model was confirmed through a contrastive analysis with the prediction results of a support vector machine (SVM) model, a random forest (RF) model, and an extreme gradient boosting (XGBoost) model. In addition, the algorithm of particle swarm optimization was used to optimize the flow rate of primary supply water. The results showed that the temperature of primary-side return water decreased from 29.6 °C to 28.2 °C, the temperature of secondary-side return water decreased from 39.8 °C to 38.6 °C, and the flow rate of primary-side supply water decreased from 39 t/h to 35.2 t/h after the optimization of the flow rate of primary supply water. The sensibility assessment emerged that the secondary-side flow rate to the secondary-side supply water temperature was about 7 times more sensitive than the primary-side supply water temperature, and concretely, the lower the temperature, the higher the sensibility. In summary, the accuracy of the proposed prediction model was validated and the optimization direction was pointed out, which can be used to provide guidance for designing and planning absorption heat exchange stations with large temperature differences.

An Improved Transient Algorithm Based on Distributed Parameter Model for Heat Exchangers

An Improved Dynamic Distributed Algorithm Based on Quasi-Separated Phase Model for Double-Tube Heat Exchanger

Predictor-corrector Algorithm for Solving Quasi-Separated-flow and Transient Distributed-Parameter Model for Heat Exchangers

Dynamic Modeling And Simulation Of Distributed Parameter Heat Exchanger

A Transient Heat Current Model for Dynamic Performance Analysis and Optimal Control of Heat Transfer System

Topography optimisation using a reduced-dimensional model for transient conjugate heat transfer between fluid channels and solid plates with volumetric heat source

An Improved Differential Method For The Performance Prediction Of Multistream Plate-Fin Heat Exchanger

An Extension of a Steady-State Model for Fin-and-Tube Heat Exchangers to Include Those Using Capillary Tubes for Flow Control

Optimization of solution flow rate and heat transfer area allocation in the two-stage absorption heat exchanger system based on a complete heat and mass transfer simulation model

A New Heat Transfer Model for Single U-pipe Ground Heat Exchanger

Estimation of the Total Heat Exchange Factor for the Reheating Furnace Based on the First-Optimize-Then-Discretize Approach and an Improved Hybrid Conjugate Gradient Algorithm

Transient heat dissipation performances of transpiration cooling with coolant phase change

Research Three Simulation Models for Fin and Tube Exchanger Used by Air Handle Unit

Parameter Optimization of an Absorption Heat Exchanger with Large Temperature Difference

Transient analysis and parameter estimation with optimizations in a plate heat exchanger

Simulation of Fin-and-tube Heat Exchanger Based on Two-phase Fluid Network

A Distributed-Parameter Model for LNG Spiral Wound Heat Exchanger Based on Graph Theory

A Frequency Domain Dynamic Simulation Method for Heat Exchangers and Thermal Systems

Model-Based Intelligent Simulation Of Underground Heat Exchanger

Performance Prediction Of Heat Exchangers Based On Model And Artificial Neural Network

A General Modeling Approach for Complex Evaporative Cooling Heat Exchanger Based on Spatial Scanning