Abstract:Hydrocyclone separation technique has commonly been applied in engineering for solid-liquid separation. In aquaculture, since Hydrodynamic Vortex Separator (HDVS) is able to control flocs concentration effectively, the Recirculating Biofloc Technology (RBFT) has been gradually acknowledged (Zhu et al., 2016). In order to operate RBFT system at maximum performance, the removal efficiency of HDVS at different Hydraulic Retention Time (HRT) must be fully predictable. The aim of this work is to investigate the relationship between separation efficiency and HRT of HDVS applied in RBFT system, through Computational Fluid Dynamics (CFD) method. For this, a three-dimensional unsteady transient model was developed to simulate the hydrodynamics in HDVS based on the commercial software Workbenching 17.0. A Two Fluid Model (TFM) using kinetic theory of granular flow (KTGF) has been developed to describe the dense solid-liquid (flocs-water) flow field of HDVS in RBFT system. Additionally, the Reynolds averaged Navier-Stokes (RANS) equations with Reynolds stress turbulence model (RSM) are solved by use of the finite volume method based on the SIMPLE pressure correction algorithm in the computational domain. Finally, pilot-scale studies were conducted to evaluate the accuracy and precision of simulation models applied. The results indicate that the flocs removal efficiency of HDVS obtained from tests were less than that from the simulation results at three different HRTs. But it decreased with the decline of HRT both for experiment and simulation. Additionally, the CFD model proposed can enhance the fundamental understanding of the effects of HRT on separation efficiency and at the same time, probably coupled with physical experiment whenever necessary, offer a more reliable way for optimum control of HDVS under varying conditions. Based on the simulation results, the flocs management in RBFT system is briefly discussed.

Numerical Simulation of Interior Flow Flied in Biconical Hydrocyclone for Oil-water

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Structural Parameter Optimization of Hydraulic Vertox Separator in Recirculating Biofloc Technology System Based on Computational Fluid Dynamics

Numerical simulation of flow and heat transfer in journal bearing lubrication

Research and Summarization on Numerical Simulation of Internal Flow in Centrifugal Impeller

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Numerical Simulation of Fluid Flow and Oil-Water Separation in Hydrocyclones

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

Numerical Study on Oil and Water Two-Phase Flow in A Cylindrical Cyclone

Cyclone Separator Three-Dimensional Turbulent Flow-Field Simulation Using the Reynolds Stress Model

Optimizing the Inlet Design of A Liquid-liquid Cylindrical Cyclone

Numerical Simulation on Structure Optimization of Liquid-Gas Cylindrical Cyclone Separator

Numerical simulation of the complex flow field in a new recycling cyclone separator

Numerical Simulation and Experiment on the Active Hydrocyclone Oil-Water Separation in Deepwater

NUMERICAL SIMULATION OF FLOW FIELD IN CYCLONE OF DIFFERENT HEIGHT

Oil/Water Separation in a Liquid-Liquid Cylindrical Cyclone

Separation performance of hydrocyclone oil removal device influenced by oil droplet trajectory and oil drop characteristics

Numerical simulation of three-dimensional two-phase flow in hydrocyclone

Analysis of Gas-Liquid-Solid Three-Phase Flows in Hydrocyclones Through a Coupled Method of VOF and DEM

Numerical Simulation of Multi-Tubular Bundle Tube Cyclone Separator

Numerical Simulation of Three-Dimension Flow Field in a New-Type Cyclone Separator with a Radial Inlet Structure