Abstract:A visual experimental system was built to explore the effect of low-pore-density copper metal foam (CMF) on the heat transfer during paraffin wax (PX) melting, and the effective thermal conductivities of composite phase change materials (PCMs) were obtained. A three-dimensional mathematical heat transfer model was established, the microstructure of the CMF was characterized using a high-definition camera, and a physical model of the CMF ball was determined. The melting heat transfer mechanism of the composite PCMs was investigated through the experimental and simulation results, including the temperature distribution, velocity vector, solid-liquid interface, volume fraction, heat transfer mechanism, and heat storage performance. The results show that as the CMF filling ratio increased from 0% to 2.13%, the temperature gradients of the composite PCMs were 86.1, 74.6, 29.2, and 12.6 K, indicating that the filling of CMF effectively alleviates the thermal stratification phenomenon during PX melting. Incorporation of the CMF increased the thermal conductivity of the composite PCMs, but suppressed their natural convection. When the CMF filling ratio was less than 1.28%, natural convection dominated the heat transfer type during PX melting; meanwhile, when the CMF filling ratio was greater than 1.28%, heat conduction was the major heat transfer mechanism. The composite PCMs exhibited great heat storage performance when the CMF filling ratio was 1.68%, and the heat storage rate was 13.25% higher than that of pure PX with the same heat storage capacity. In addition, a theoretical calculation model for predicting the heat transfer mechanism of the composite PCMs was established, and the results show that as the CMF filling ratio increased from 0.43% to 2.15%, the natural convection proportion of heat transfer performance decreased from 82.74% to 13.99% during the melting process.

Experiment on Thermal Conductivity Enhancement for PCM Embedded in Metal Foam

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

A New Model of Phase Change Process for Thermal Energy Storage

Experimental Investigation on Thermal Performance of Phase Change Materials–metal Foam Composites in Ocean Thermal Engine

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam

Effect of enhancement in metal foam pore density on heat transfer of phase-change materials

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Numerical simulation on thermal behavior of partially filled metal foam composite phase change materials

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Experimental and simulation study on the heat transfer mechanism and heat storage performance of copper metal foam composite paraffin wax during melting process

Visualized-experimental investigation on the energy storage performance of PCM infiltrated in the metal foam with varying pore densities

Experimental investigation of the effect of copper foam pore structure on the thermal performance of phase change material in different centrifugal force fields

Heat transfer performance of copper foam/paraffin composite phase change material under different centrifugal forces-A visual experimental study

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage

Experimental investigation on the melting behavior of phase change materials in open-cell metal foams in an inclined rectangular enclosure