Abstract:The chemical-vapor-deposition (CVD) process is sufficiently well developed to allow the large-scale production of carbon nanotubes (CNTs). Metal nanoparticles (Fe, Co, Ni, etc.) are usually immobilized on a solid support and then decompose the gaseous hydrocarbon feedstocks into fragmented carbon units at elevated temperatures of 700-1100°C. Metal carbides are formed and then these dominate the growth of filamentous carbon as a structural template. The produced CNTs cannot stay firmly with an inert support and so inevitably detach away, especially during liquidphase purification or mechanical treatment. The biggest difficulties when handling the loose powder are filtration in the slurry-phase operations and the large pressure drops in fixed-bed reactors. These problems very much limit the application of CNTs on a large scale. The fabrication of carbon filaments on a structured support (e.g., activated carbon, carbon fibers, porous frameworks, graphite) has also suffered from discontinuities in the structure. The future use of CNTs has also been restricted by the technical requirements and the necessary high energy consumption to operate the intense and complicated CVD process. To avoid any mechanical post-treatment of powder and the risk of explosion during CVD synthesis, we have explored a simple method to produce monolithic CNTs directly as millimeter-scale spheres, featuring an integral continuity in the structure from microscopic to macroscopic scales. The whole process of CNTs growth has been conducted in a flow of ultrapure N2, involving a set of elementary steps in the solid phase being less complex than the widely used CVD process. The growth of CNTs is based on a solid reaction mechanism and well-graphitized nanotubes can be obtained even at a temperature as low as 400C. Direct observation of all growth events is made by using in-situ transmission electron microscopy (TEM), X-ray diffraction (XRD), IR, Raman spectroscopy and thermogravimetric analysis. A commercial styrene-divinylbenzene copolymer resin was used as the carbon precursor. According to Scheme 1, the ion-exchanged resin spheres were calcined at 800C in a flow of N2 or vacuum, after which the average diameter decreases from 0.77 to 0.49 mm, while the bulk density increases from 0.55 to 0.91 g ml. A novel macroscopic structure can be clearly seen, especially after the removal of the Fe nanoparticles and the amorphous carbon species by refluxing the spheres in concentrated HNO3. As seen in Fig. 1a, the twisted nanotubes construct the monolith while keeping a spherical shape. The cross-section views of the hand-broken spheres show no difference in the structure between the bulk and the surface, indicating a homogeneous distribution of the nanotubes in the millimeter-scale spheres (Fig. 1b). The nitrogen adsorption/ desorption isotherm shows a hysteresis loop to identify a typical mesoporous feature. The measured BET surface area and the pore volume are 223.7 m g and 0.42 ml g, respectively. The distribution of the pores ranges between about 2 and 15 nm.

Carbon Spheres Synthesized by Ultrasonic Treatment

One-step Syntheses and Properties of Carbon Microspheres with Amino Groups

The Production of Carbon Nanostructures by Ultrasonic Treatment on High-Oriented Plane Graphite

In Situ Formation and Structure Tailoring of Carbon Onions by High-Resolution Transmission Electron Microscopy

Properties of Carbon Onions Produced by an Arc Discharge in Water

Synthesis of Carbon 'onions' in Water

Large-scale synthesis and characterization of carbon spheres prepared by direct pyrolysis of hydrocarbons

Production of Carbon Nanostructures by Co2-Laser Irradiating Graphite

GROWING CARBON BUCKONIONS BY RADIO FREQUENCY PLASMA-ENHANCED CHEMICAL VAPOR DEPOSITION

Controllable and Large-Scale Synthesis of Carbon Nanofibers, Bamboo-Like Nanotubes, and Chains of Nanospheres over Fe/Sno2 and Their Microwave-Absorption Properties

Hydrothermal Synthesis of Carbon Nanospheres

Synthesis of High Purity Chain-Like Carbon Nanospheres in Ultrahigh Yield, and Their Microwave Absorption Properties

Spherical Multi-Walled Carbon-Nanotube Architectures : Formation Mechanism and Catalytic Performance

Tunable internal structure carbon sphere synthesis driven by water-solubility and its application in gas separation

Synthesis of Carbon Nanospheres with Small Diameterby Microwave Pyrolysis of Methane Directly

Graphitic spheres by pyrolyzing toluene–ferrocene–thiophene in a chemical vapor deposition experiment

Synthesis and Characterizations of Porous Spherical CuSCN Nanoparticles

Ultrahigh vacuum scanning probe microscopy studies of carbon onions

Colloidal Carbon Spheres and Their Core/Shell Structures with Noble‐Metal Nanoparticles

Synthesis and Characteristics of Cubic Silicon Carbide Nanospheres with Smooth Surfaces.

Low-temperature Solution Synthesis of Carbon Nanoparticles, Onions and Nanoropes by the Assembly of Aromatic Molecules