Abstract:Using 20L explosion vessel, the present research work reports some experimental results which elucidate the effects of dust concentration, particle size and specific surface areas on aluminum dust explosion severity. Dust flame propagation property and explosion products were analyzed systemically. Six kinds of aluminum powders with different size distributions were selected and specially prepared for explosion tests. Results show that explosion parameters present an increasing and then decreasing trend with dust concentrations. The optimum explosion concentrations for all the selected aluminum dusts are similarly equal to 500g/m3. Maximum explosion pressures would be quadratic correlated with the decreasing of particle size. However, (dP/dt)max would be exponentially increasing with particle size decreasing. Aluminum dust flame propagation speed would be increased and the combustion mechanism would be transited from diffusion-controlled mode to kinetically controlled mode with particles diameter decreasing. For the finer dust cloud (dS less than 10μm), dust flame propagation speed would be exponential increased with dust concentration. However, there is a power function relation between flame propagation speeds and dust concentration for the coarse aluminum dust cloud (dS larger than 10μm). At the experimental condition, flame propagation speed presents an exponentially decreased trend with the increasing of particle size. Explosion products obtained at different conditions present different apparent morphology. The higher explosion pressure, the finer explosion fragments and nano-scale spherical structure would be produced. For coarse aluminum particles, explosion products present fluffy flocculent structure. Furthermore, alumina produced under lower explosion pressure conditions are mainly γ-Al2O3 components. Under high explosion pressure condition (such as 0.56MPa), there are notable bulges corresponding to α-Al2O3 are produced. Present research results may have important significance for understanding the explosion mechanism of aluminum-air dust/air cloud.

Effects Analysis of Blast Field of Solid FAE Device in Free Air

Experimental study on explosion effect during single ignition of fuel air explosive

Research of Loading Effects of Blast in Air

Pressure Field Analysis of Dust Explosion in Free Air

Evaluation on thermal damage effects of single event solid fuel air explosive

Probability Distribution and Determination of Blast Loading During Structural Blast Resistant Study

Experimental Study on Unconfined Volume Explosion Effects of Low-mass New Fuel Air Explosives

Experimental Study on Single Ignition of Solid and Liquid FAE

Investigntion of Bursting Height of FAE Influences Blast Pressure Measuring

Effects of Main Components on Energy Output Characteristics of Thermobaric Explosive — A Case Study of Typical Formulations

Blast enhancement from metalized explosives

The Experimental Investigation on Launching Safety of FAE Explosive Charge

Effect of metal powders on explosion of fuel-air explosives with delayed secondary igniters

Effect of Shock Wave on Fabricated Anti-Blast Wall and Distribution Law Around the Wall under Near Surface Explosion

Study on the Damage Effects of Explosive Media Based on FEM-DEM Local Adaptive Transformation

Study on Near Field Dispersal of Fuel Air Explosive

Effect of Total Energy of Center Explosive Charge on Fuel Dispersal Characteristic Feature

Parametric analysis on explosion resistance of composite with finite element and artificial neural network

Study on the characteristics of blast loads due to two simultaneous detonated charges in real air

Experimental Research on the Characteristic of Impact Caused by a Blast of Inflammable Mixture to a Rigid Wall

Explosion severity of micro-sized aluminum dust and its flame propagation properties in 20 L spherical vessel