Abstract:Abstract The direct-fired supercritical carbon dioxide cycles are one of the most promising power generation methods in terms of their efficiency and environmental friendliness. Two important challenges in implementing these cycles are the high pressure (300 bar) and high CO2 dilution (>80%) in the combustor. The design and development of supercritical oxy-combustors for natural gas require accurate reaction kinetic models to predict the combustion outcomes. The presence of a small amount of impurities in natural gas and other feed streams to oxy-combustors makes these predictions even more complex. During oxy-combustion, trace amounts of nitrogen present in the oxidizer is converted to NOx and gets into the combustion chamber along with the recirculated CO2. Similarly, natural gas can contain a trace amount of ammonia and sulfurous impurities that get converted to NOx and SOx and get back into the combustion chamber with recirculated CO2. In this work, a reaction model is developed for predicting the effect of impurities such as NOx and SOx on supercritical methane combustion. The base mechanism used in this work is GRI Mech 3.0. H2S combustion chemistry is obtained from Bongartz et al. while NOx chemistry is from Konnov. The reaction model is then optimized for a pressure range of 30–300 bar using high-pressure shock tube data from the literature. It is then validated with data obtained from the literature for methane combustion, H2S oxidation, and NOx effects on ignition delay. The effect of impurities on CH4 combustion up to 16 atm is validated using NOx-doped methane studies obtained from the literature. In order to validate the model for high-pressure conditions, experiments are conducted at the UCF shock tube facility using natural gas identical mixtures with N2O as an impurity at ∼100 bar. Current results show that there is a significant change in ignition delay with the presence of impurities. A comparison is made with experimental data using the developed model and predictions are found to be in good agreement. The model developed was used to study the effect of impurities on CO formation from sCO2 combustors. It was found that NOx helps in reducing CO formation while the presence of H2S results in the formation of more CO. The reaction mechanism developed herein can also be used as a base mechanism to develop reduced mechanisms for use in CFD simulations.

Gas-phase Simulation of Oxyfuel-Derived CO2 During Sour Compression Process

Effect of Pressure and CO2 Dilution on Soot Formation in Laminar Inverse Coflow Flame at Conditions Close to Autothermal Reforming

Preliminary Study On Co2 Processing In Co2 Capture From Oxy-Fuel Combustion

Assessment of Sulfur Trioxide Formation Due to Enhanced Interaction of Nitrogen Oxides and Sulfur Oxides in Pressurized Oxy-Combustion

Synergistic SOx/NOx Chemistry Leading to Enhanced SO3 and NO2 Formation During Pressurized Oxy-Combustion

A Kinetic Evaluation on NO2 Formation in the Post-Flame Region of Pressurized Oxy-Combustion Process

Probing the Effects of NOx and SOx Impurities on Oxy-Fuel Combustion in Supercritical CO2: Shock Tube Experiments and Chemical Kinetic Modeling

Effect of Carbon Dioxide on Oxy-Fuel Combustion of Hydrogen Sulfide: an Experimental and Kinetic Modeling

Measurement and Modeling of Nitrogen Oxides Absorption in a Pressurized Reactor Relevant to CO2 Compression and Purification Process

Optimization of cryogenic CO2 purification for oxy-coal combustion

A Simple Mathematical Model and Computer Simulation of Non-isothermal Gas Absorption in Packed Tower

Experimental and Numerical Evaluation of Coal-N Conversion Characteristic During Preheating-Combustion under O2/CO2 Atmosphere

Modeling of Non-Catalytic Partial Oxidation of Natural Gas under Conditions Found in Industrial Reformers

Pure Oxygen Combustion of Acid Gas for Reducing So2 Production in a Normal Diffusion Flame under Claus Conditions

Experimental and numerical evaluation of coal-N conversion characteristic during preheating-combustion under O 2 /CO 2 atmosphere

Experimental and Kinetic Study of N2O Thermal Decomposition in Pressurized Oxy-Combustion

Experimental Study of NO x Formation in a High-Steam Atmosphere During a Pressurized Oxygen-Fuel Combustion Process

The Effect of Co2 Addition on Oxy-Fuel Combustion of H2s: A Reaction Pathway Analysis

Experimental and Numerical Investigation on Sulfur Transformation in Pressurized Oxy-Fuel Combustion of Pulverized Coal

COG Based Syngas Production Process with Catalytic and Non-catalytic Partial Oxidation

Kinetics Study of a Staged Combustor Concept for Oxy-Fuel Combustion Gas Turbine Cycles