Abstract:In this study, an artificial neural network (ANN) model was developed to predict the flexural strength and thermal properties of thermosetting nanocomposites based on polybenzoxazine matrix and Bi2O3 nanoparticles. The excellent values of the correlation coefficients (〉0.99) between the predicted and experimental values for all the samples demonstrated the high accuracy of the ANN model and the importance of its use to predict the properties of thermosetting polymer composites. Polybenzoxazine (BA‐a) based nanocomposites with varying amounts of Bi2O3 particles reinforcement (10, 20, and 30 wt%) were produced. The structures of the Bi2O3 before and after surface silane treatment, as well as the structures of the BA‐a matrix and its nanocomposites, were all evaluated using Fourier transform infrared spectroscopy (FTIR). The thermal stability of the samples was evaluated by thermogravimetric analysis (TGA) and the resistance to bending was studied using the three‐point bending test. Then, an artificial neural network approach was used to estimate the thermal degradation and flexural strengths of the polybenzoxazine matrix and its nanocomposites. The results of the TGA analysis showed that when Bi2O3 content increased, the char yield (Yc) of the nanocomposites also increased from 27.98% to 43.53% for the experimental data and from 27.95% to 43 0.57% for the prediction, with all SDs less than 0.02. Moreover, both the experimental and predicted values of the flexural strengths for the unfilled BA‐a displayed 100.40 and 102.96 MPa, respectively and these values increased to 119.65 and 114.95 MPa when 10 wt% of fillers were incorporated into the matrix. However, for higher filler contents, 20 and 30 wt%, these values decreased to 112.94 and 108.01 MPa for the experiments, and 106.35 and 103.20 MPa for the prediction, respectively. The very small deviations (<0.05) between the experimental and predicted values demonstrated that the prediction approach using the artificial neural network is reliable and accurate.

Investigation of Batio3 Formulation: an Artificial Neural Network (ann) Method

Application of Artificial Neural Network (ANN) Technique to the Formulation Design of BaTiO3 Dielectric Ceramics

Evaluation of Chracteristic of Optical Thin Film By Neural Network System

Analysis of the electrical properties of PZT by a BP artificial neural network

Application of ANN technique in the property analysis of piezoelectric ceramics

Property Analysis and Optimization of Pzt Ceramic Material Through an Ann Method

Prediction of the functional properties of ceramic materials from composition using artificial neural networks

Modeling and analysis of the electrical properties of PZT through neural networks

Artificial Neural Network Modeling And Analysis Of Preparation Of Porous Si3n4 Ceramics

Investigation into Rare-earth Elements Doping in BaTiO3 Ceramics Using a BP Artificial Neural Network

Neural Network Modeling and Analysis of Gel Casting Preparation of Porous Si3N4 Ceramics

The Application of Artificial Neural Network in Materials Fabrication Industry

Exploration of artificial neural network to predict morphology of TiO2 nanotube

Improved Artificial Neural Network for Data Analysis and Property Prediction in Slag Glass–Ceramic

Using a simple radial basis function neural network to predict the glass transition temperature of alkali borate glasses

Artificial neural network prediction of thermal and mechanical properties for Bi2O3‐polybenzoxazine nanocomposites

Application of Artificial Neural Network in Composite

Catalyst Optimization Design Based on Artificial Neural Network

Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining

A Neural Network Modeling Method for Batch Process

Fast Stress Evaluation Of The Top Coat Of Thermal Barrier Coatings Under Cao-Mgo-Al2o3-Sio(2)Penetration Based On Image Recognition And An Artificial Neural Network