Abstract:Fringe patterns are typically produced as the results of traditional optical Nondestructive Evaluation (NDE) employing digital shearography. Structural flaws affect the response of the surrounding material to a certain loading, resulting in unique fringe patterns that are related to the local deformation. Smaller defect information, however, can be easily lost in the fringe pattern caused by global deformation during the flaw detection procedure. In order to improve the flaw detection capabilities of this technology, it is important to streamline the inspection process and to simplify the interpretation of the results. This study proposes a practical and effective methodology that experimentally removes fringe patterns caused by global deformation in digital shearography and only retains the defect information. For shearographic Non-Destructive Testing (NDT), two sets (3 or 4 images) of temporal phase-shifted interferograms under different loads P 1 and P 2 are recorded. This novel approach involves recording one additional set of temporal phase-shifted interferograms at a load between P 1 and P 2 , e.g. P 1' . Two phase maps of shearograms can be generated using the phase shift technique, corresponding to the two loads Δ 2 = (P 1' -P 1 ) and Δ 1 = (P 2 -P 1 ), respectively. Because of the nondestructive nature of the testing, the magnitude of the loads P 1 and P 2 is small, and the 1st derivative of global deformation in the shearing direction of the test part is assumed to be linear. Therefore, a linear coefficient C based on the two shearograms can be determined. The information from global deformation is then removed by subtracting the shearogram generated with the small load Δ 2 multiplied by the correlation coefficient C from the one obtained with the relatively large load Δ 1 . This technique is further improved by calculating a complete surface linear coefficient C ij , which improves the detail processing of the deformation of samples with complex geometry and mechanical properties. This technique is shown to effectively assess a wide range of structures, including aluminum specimens with prepared flaws and intricate composite laminates. The experimental findings demonstrate that the suggested technique improves the non-destructive testing capabilities of digital shearography, thereby simplifying defect detection and visualization.

Quantitative evaluation of corrosion by a digital fringe projection technique

Surface Measurement Methods Based on Single and Multi-Frequency Fringes and Its Applications in Reverse Engineering

Chromatic DIC-Assisted Fringe Projection Profilometry for Shape, Deformation, and Strain Measurement With Intensity-Chroma Space Analysis

Three-Dimensional Shape and Deformation Measurements Based on Fringe Projection Profilometry and Fluorescent Digital Image Correlation via a 3 Charge Coupled Device Camera

Quantitative Evaluation Of Subsurface Corrosion In Conductive Structures Via Gpec

3D visual reconstruction of corrosion in underwater structure using alternating current field measurement technique

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Quantitative Advantages of Corrosion Sensing Using Fluorescence, Microscopy, and Single-Molecule Detection

Fast 3D Surface Defect Detection with Fringe Projection

Efficient Evaluation of Concrete Fracture Surface Roughness Using Fringe Projection Technology

A novel method for measuring the width and angle of corrosion in Hall thrusters using three-dimensional point cloud

Digital shearography for NDT: Study on a novel experiment based method for removing global deformation ✰

High-resolution Real-Time 360∘ 3D Surface Defect Inspection with Fringe Projection Profilometry

Quantitative Analysis of Micrometer-Scale Corrosion on Aluminum Plates Based on Lamb Wave Time-Frequency Distribution Covariance Dissimilarity

Comparison of Surface Fractal Dimensions of Chromizing Coating and P110 Steel for Corrosion Resistance Estimation

Measurement pitting morphology characteristic of corroded steel surface and fractal reconstruction model

Coupled application of innovative electromagnetic sensors and digital image correlation technique to monitor corrosion process of reinforced bars in concrete

A New Projecting Moire Techenique Of Using Color: Encoded Fringes For Surface Shape And Deformation Measurement

An adaptive fringe projection method for 3D measurement with high-reflective surfaces

Corrosion Analysis and Recognition Algorithms Based on Cfa and Fdt in Time Domain for Rc Structures