Abstract:The low-temperature oxidation process of carbon-carbon composite materials (CCCM) with a pyrocarbon matrix has been examined. Oxidation at temperatures of 450 to 700 °C is characterized by internal burnout of the carbon phase without a noticeable change in the experimental samples external volume. Oxidation resistance analysis of CCCM structural components was performed. CCCM and carbon fibers specific surface area were estimated by the low-temperature adsorption of nitrogen and krypton using the Brunauer-Emmett-Teller model and the theory of density functional model. Pore size distribution was calculated by the semi-empirical Horvath-Kawazoe method. A significant increase (about 10-15 times) in specific surface area of the composite material, together with a rise in free volume ~5%, was accompanied by total weight loss of about 5%. Specific surface area changes occur as a result of anisotropic etching of carbon fibers surface with the formation of micropores with 0.5–2.0 nm diameter range. Although macropores are formed mainly due to the oxidation of thermosetting binder pyrolysis residue, they do not contribute to the specific surface increase but solely provide access to micropores. Microporosity evolution leads to an increase of structural discontinuity degree and, ultimately, to the loss of matrix-filler contact boundary. As a result, an overall weakening of material mechanical characteristics is to be noted. Thus, oxidative degradation is closely related to the increase in void space. A follow-up study is on-going. In fact, an open question remains, namely whether the oxidative process occurs differently in the micropores of diameter less than 2 nm and how it may contribute to the oxidative stress resistance behavior of CCCM.

Influence of Low-Level Oxidation on Mechanical Property of Two-Dimension Carbon/Carbon Composites

Oxidation Kinetics and Its Impact on the Strength of Carbon Short Fiber Reinforced C/SiC Ceramics

Influence Of Thermal-Oxidative Aging On Property Of Carbon Fiber Bismaleimide Resin Composites

Insight into the origin of oxidation behaviors of carbon fiber reinforced carbon aerogel composites with different porous skeletons

Effect of oxidation on internal friction behavior of C/SiC composites

Influence of Oxidation Damages on Mechanical Properties of SiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers

Study of the damage behavior of T800 carbon fiber/epoxy resin composites after low-velocity impact under thermo-oxidative aging

Stress‐Oxidation Behavior of a Carbon/Silicon Carbide Composite in a High‐Temperature Combustion Environment

High-Temperature Fatigue Degradation Behaviors of a 3D Braided C/SiC with a Thin Interlayer in Different Dry Oxygen Atmospheres

Influence of carbon fiber failure mode caused by TiO 2 coating on the high temperature tensile strength of carbon fiber reinforced 7075 Al alloy composites

Temperature-dependent oxidation kinetics and mechanical properties degradation of Cf/ZrB2-SiC composites

Non-Destruction Evaluation Method for Long-Term Oxidation Behavior of SiC/SiC Composites with Different Preforms in Wet Oxygen

The research on oxidation resistance ability and mechanical properties of carbon fiber reinforced phenolic resin composites

Initial damage behavior of Al2O3‐modified SiCf/SiC–B4C composites after oxidation under wet atmosphere at 1200°C

Influence of High-Temperature Oxidation and Test Conditions on the Dynamic Mechanical Properties of 2.5D SiCf/SiCm Composites

CCCM SPECIFIC SURFACE ESTIMATION IN PROCESS OF LOW-TEMPERATURE OXIDATION

Sublimation and oxidation zone ablation behavior of carbon/carbon composites

Oxidation behavior of 3D Hi–Nicalon/SiC composite

Ablation and mechanical behaviour of C/C composites under an oxyacetylene flame and tensile loading environment

Pre-oxidation Temperature Optimization of Ultra-High Temperature Ceramic Components: Flexural Strength Testing and Residual Stress Analysis

Microstructure and mechanical properties of a three‐dimensional oxide/oxide composite after long‐term thermal exposure