Abstract:This study presents a structural analysis algorithm called the finite particle method (FPM) for kinematically indeterminate bar assemblies. Different from the traditional analysis method, FPM is based on the combination of the vector mechanics and numerical calculations. It models the analyzed domain composed of finite particles. Newton's second law is adopted to describe the motions of all particles. A convected material frame and explicit time integration for the solution procedure is also adopted in this method. By using the FPM, there is no need to solve any nonlinear equations, to calculate the stiffness matrix or equilibrium matrix, which is very helpful in the analysis of kinematically indeterminate structures. The basic formulations for the space bar are derived, following its solution procedures for bar assemblies. Three numerical examples are analyzed using the FPM. Results obtained from both the straight pretension cable and the suspension cable assembly show that the FPM can produce a more accurate analysis result. The motion simulation of the four-bar space assembly demonstrates the capability of this method in the analysis of kinematically indeterminate structures.

The Modal Analysis of a Kind of PKM Based on FEM

The Influences of Structure Parameters on BKX-ⅠPKM’s Modal

The Dynamics Response Analysis on BKX-Ⅰ Model PKM Based on FEM

Model Analysis of Gilling Machine

Dynamic nonlinear analysis of structures based on the finite particle method

Modal Analysis and Structure Design for Hydraulic Muffler

Finite Particle Method for Kinematically Indeterminate Bar Assemblies

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

Dynamic Sensitivity Analysis of Complex Structure Based on FEM

Research On Terminal Behavior Of Electrostatically Actuated Micropump Membrane Based On Modal Analysis - Art. No. 60400u

Finite element method and experimental modal analysis of PMLSM for ropeless elevator

Finite Element Analysis Method for Modal Characteristic of Machine Column

Modal and Harmonic Reponse Analysis and Evaluation of Machine Tools

MODAL ANALYSIS OF(P/FGM/P) CANTILEVER PLATE BASED ON ANSYS

Finite Element Method Modal Analysis of Driving Motor for Electric Vehicle

SIMPLIFICATION OF THE RIGID BODY DYNAMIC MODEL FOR A 6-UPS PARALLEL KINEMATIC MACHINE UNDER THE ACCELERATED MOTION AND THE DECELERATED MOTION

Dynamic Design for a Novel Parallel Kinematic Machine with Passive Linkage

Modal analysis of machine tools during working process by matrix perturbation method

Modal analysis for a 1:10 model of turbine-dynamotor frame foundation

Simplified Rigid Body Dynamic Model for a Parallel Kinematics Machine under Uniform Motion

Wet modal analysis and tests for pneumatic empennages