Abstract:The static drill rooted nodular pile is a new type of pile foundation consisting of precast nodular pile and the surrounding cemented soil.This composite pile has a relatively high bearing capacity and the mud pollution will be largely reduced during the construction process by using this type of pile.In order to investigate the bearing capacity and load transfer mechanism of this pile,a group of experiments were conducted to provide a comparison between this new pile and the bored pile.The axial force of a precast nodular pile was also measured by the strain gauges installed on the pile to analyze the distribution of the axial force of the nodular pile and the skin friction supported by the surrounding soil,then 3D models were built by using the ABAQUS finite element program to investigate the load transfer mechanism of this composite pile in detail.By combining the results of field tests and the finite element method,the outcome showed that the bearing capacity of a static drill rooted nodular pile is higher than the bored pile,and that this composite pile will form a double stress dispersion system which will not only confirm the strength of the pile,but also make the skin friction to be fully mobilized.The settlement of this composite pile is mainly controlled by the precast nodular pile;meanwhile,the nodular pile and the surrounding cemented soil can be considered as deformation compatibility during the loading process.The nodes on the nodular pile play an important role during the load transfer process,the shear strength of the interface between the cemented soil and the soil of the static drill rooted pile is larger than that of the bored pile.

Analysis on Stability Checking for Bearing Capacity of Bored and Club-footed Piles in Deep and Soft Foundation

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Study on Bearing Behavior of Pure-friction Long Pile in Soft Clay

The Principle of Pile-soil Interaction Applied to Reinforce Pile Accident

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

A test on base bearing capacity of static drill rooted nodular pile

Stability of composite foundation improved by rigid piles under embankment considering different failure modes of piles

Reliability Research on Bearing Capacity of Deep-Mixing Pile Composite Foundation

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

Model Test on Bearing Characteristic of Static Drill Rooted Energy Pile

ANALYSIS ON BEARING CAPACITY OF DIVING DRY-VIBRATION COMPACTION STONE PILES

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

Experimental study on vertical bearing performance of base post-grouted cast-in-place plies in soft soils

Improvement of revised density method for stability analysis of rigid-pilecomposite foundation under flexible loads

Analysis of stress and failure mechanism on composite foundation improved by rigid piles under flexible foundation considering damage of piles

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile