Abstract:In this paper, a novel planar waveguide with quasi-TEM mode for periodic structure measurement applications is proposed. Unlike conventional parallel double conductor transmission lines (PDCTL) which suffer from mismatch to 50 ohms, the proposed planar waveguide consisting of an F4B substrate, a metal conductor line, and a metal base has easy access to match to 50 ohm through a special transition region and also has a satisfactory insertion loss in a wide band. The metal conductor line etched on one side of the F4B substrate, and the metal base is parallel to mimic a perfect electric wall, where a "fake" infinite plane is realized. The proposed planar waveguide has a wide measurement bandwidth with the reflection coefficient below -15 dB, which cannot be realized by a standard rectangular waveguide. Good agreements between the simulated and measured results are obtained. In addition, a simple periodic structure is designed as an example. The transmission characteristics of the periodic structure are simulated and compared in two different methods, namely, standard periodic structure simulation method in free space and proposed planar waveguide method. All the measured results demonstrate the validation of our designed planar waveguide, which is convenient and economical for periodic structure measurement applications.

A New Method for Measuring Cut-Off Wavelengths of Waveguides with Arbitrary Cross Sections

Source Excitation and Parameter Extraction for Time-Domain Simulation of Rectangular Waveguides

Analysis of Rib Waveguides with Trapezoidal Cross Section

Measurements of the Effective Refractive Index of Bent Waveguide Based on Micro-Ring Resonators

A Hybrid Boundary Scheme For Reducing Rectangular Waveguide Cutoff Frequency

New Method for the Recovery of the Refractive-Index Profile of an Optical Waveguide from the Measured Coupling Angles

Multiple Reciprocity Boundary Element Method Applied to the Analysis of Arbitrary Crosssection Waveguide' Cutoff Frequency

COMPARISON OF MEASURED AND CALCULATED COUPLING BETWEEN A WAVEGUIDE AND AN RF CAVITY USING CST Microwave Studio

Analysis of a novel family of high-power waveguides

A NOVEL QUASI-TEM MODE PLANAR WAVEGUIDE FOR PERIODIC STRUCTURE MEASUREMENT APPLICATIONS

Wave-scattering method for waveguide–microcavity coupling

Low-Profile and High-Passband Roll-Off Frequency-Selective Structure Using Bent Waveguides

A New Radial Transmission Line Network Approach for Symmetrical Modes in Circular Chirowaveguides

Design and resonator-assisted characterization of high performance lithium niobate waveguide crossings

Measurement of the Microwave Refractive Index of Materials Based on Parallel Plate Waveguides

A More Accurate Measurement Method of the Dielectric Material Properties With High Tolerance Using an Overmoded Waveguide

Theoretical Investigations on Cutoff Wave Number of Quad-Polar Waveguide

An Improved Waveguide Method for Accurate Complex Permittivity Measurement of Medium/High-Loss Material

An Accurate Retrieval Method for Complex Electrical Parameters of Materials Based on Partially Filled Waveguide

An Alternate Method for the Analysis of A Waveguide-Loaded Cavity

An Alternative Method to Analyze Field Distribution in Curved Dielectric Waveguides