Abstract:Rapid analytical methods are needed to quantify living microorganisms to determine if ships’ discharged ballast water is in compliance with national and international standards. Traditionally, regrowth assays and microscope counts of stained organisms—which are time-consuming, require expensive equipment, and require extensive staff training—are used to assess microorganisms. The goal of this study was to evaluate other approaches. Both ambient microorganisms from an oligotrophic marine environment and laboratory cultures of marine algae were evaluated following exposure to two types of ballast water treatment: ultraviolet (UV) light and chlorine dioxide (ClO2). Microorganisms in two size classes (<10 and ≥10 to <50 μm) were quantified using regrowth assays and vital staining, and samples were evaluated using two rapid approaches: (1) chlorophyll a fluorescence and photochemical yield were measured using a pulse amplitude modulated fluorometer and (2) the concentration of adenosine triphosphate (ATP) was measured with a handheld luminometer. The response of microorganisms to UV and ClO2 was evident in measurements of photochemical yield, as photochemical yield decreased at high doses. However, initial values of photochemical yield were variable and species-specific. Oddly, in some trials, initial fluorescence increased at intermediate UV doses; this phenomenon could lead to overestimation of total biomass. In samples treated with UV light, ATP was not significantly different among any of the doses used; however, concentrations of ATP were significantly lower at the highest dose of ClO2 than control samples. These results demonstrate that approaches used for ballast water testing can be treatment-specific, and compliance approaches should be validated to determine their utility with the appropriate treatments.

Reliability Analysis on Ballast Water Treatment by Combination of Micro-Pore Filtration and UV Radiation

Establishment and performance of the O3/UV pilot-scale ballast water treatment

Study On Ballast Water Treatment By Using Uv/O-3 Process

Ballast Waters Treatment Using UV/Ag–TiO2+O3 Advanced Oxidation Process with Escherichia Coli and Vibrio Alginolyticus As Indicator Microorganisms

The Experimental Study on the UV Ballast Water Treatment System

A New Treatment Strategy for Inactivating Algae in Ballast Water Based on Multi-Trial Injections of Chlorine

UV-assisted Chlorination of Algae-Laden Water: Cell Lysis and Disinfection Byproducts Formation

Ballast water treatment and bacteria: Analysis of bacterial activity and diversity after treatment of simulated ballast water by electrochlorination and UV exposure

Treatment of Simulated Ballast Water Using Combined Photocatalysis and Ozonation Process

Study of Eradicating Invasive Organisms from Ballast Water with Pulsed Discharge in Liquid

Study on Treatment of Domestic Sewage by Algae Biofilm Technique

Enhanced Performance of Ultrasonic Pretreatment of High-algae Source Water

The Treatment Of Algae-Laden Raw Water With Compact Flofliter Of Dissolved Air Flotation And Gac Deep Bed Filtration

Effects of Ultraviolet Radiation on Algae-Removal of Feedwater

UV Ballast Water System Optimal Design and Experimental Verification

Life after treatment: detecting living microorganisms following exposure to UV light and chlorine dioxide

Ballast Water Treatment Performance Evaluation under Real Changing Conditions

STUDY OF COMBINED ULTRAFILTRATION AND DISINFECTION OF THE TREATED WATER

Research on Algae Removal by Electro-flotation/Photo-catalytic Oxidization Combined Process

Coal-Based Carbon Membrane Coupled with Electrochemical Oxidation Process for the Enhanced Microalgae Removal from Simulated Ballast Water

Inactivation of Escherichia Coli Using UV/AgTiO2/O3‐mediated Advanced Oxidation: Application to Ballast Water Disinfection