Abstract:Purpose In a dual-robot system, the relative position error is a superposition of errors from each mono-robot, resulting in deteriorated coordination accuracy. This study aims to enhance relative accuracy of the dual-robot system through direct compensation of relative errors. To achieve this, a novel calibration-driven transfer learning method is proposed for relative error prediction in dual-robot systems. Design/methodology/approach A novel local product of exponential (POE) model with minimal parameters is proposed for error modeling. And a two-step method is presented to identify both geometric and nongeometric parameters for the mono-robots. Using the identified parameters, two calibrated models are established and combined as one dual-robot model, generating error data between the nominal and calibrated models’ outputs. Subsequently, the calibration-driven transfer, involving pretraining a neural network with sufficient generated error data and fine-tuning with a small measured data set, is introduced, enabling knowledge transfer and thereby obtaining a high-precision relative error predictor. Findings Experimental validation is conducted, and the results demonstrate that the proposed method has reduced the maximum and average relative errors by 45.1% and 30.6% compared with the calibrated model, yielding the values of 0.594 mm and 0.255 mm, respectively. Originality/value First, the proposed calibration-driven transfer method innovatively adopts the calibrated model as a data generator to address the issue of real data scarcity. It achieves high-accuracy relative error prediction with only a small measured data set, significantly enhancing error compensation efficiency. Second, the proposed local POE model achieves model minimality without the need for complex redundant parameter partitioning operations, ensuring stability and robustness in parameter identification.

ACCURACY ANALYSIS OF MICRO MOTION ROBOT BASED ON GENERALIZED GEOMETRIC ERROR MODEL

Error Modeling of Parallel Robots for Semi-Physical Simulation Platform of Space Docking Mechanism

Error Analysis and Modeling of Monolithic Micromanipulator

A Method for Predicting Relative Position Errors in Dual-Robot Systems Via Knowledge Transfer from Geometric and Nongeometric Calibration

Kinematic Modeling and Error Parameter Identification of Automated Fiber Placement Machine Based on Measured Data

Kinematic Modeling and Error Analysis of Delta Robot Considering Parallelism Error

A Hybrid Analytical and Data-driven Modeling Approach for Calibration of Heavy-duty Cartesian Robot

Error Modeling and Sensitivity Analysis of A Parallel Robot with Scara(Selective Compliance Assembly Robot Arm) Motions

Geometric Methods in the Modeling of Robot Mechanisms

Motion Reliability Analysis of the Delta Parallel Robot considering Mechanism Errors

A general approach for geometric error modeling of over-constrained hybrid robot

Accuracy Analysis of Parallel Mechanisms Based on Set Theory

Error Modeling and Sensitivity Analysis of a Parallel Robot with R-(SS)2 Branches

A Kinematic Calibration Method for Robots Based on the PGTF Error Model and Levenberg-Marquardt Algorithm

Static Error Modelling and Calibration for Parallel Robots Based on Virtual Joint Pairs

Kinematic Analysis and Error Modeling of TAU Parallel Robot

Dynamic Accuracy Analysis of a 5PSS/UPU Parallel Mechanism Based on Rigid-Flexible Coupled Modeling

Kinematical Error Analysis and Identification of a 3-PRS Parallel Mechanism

Geometric error propagation model based accuracy synthesis and its application to a 1T2R parallel manipulator

Mechanism analysis and accuracy prediction for kinematic errors of machine tool

Modeling and Analysis of Movement Error of Three Axis Orthogonal Robots