A Study on Cultivating of Engineering Practice Ability of the Mechanical Engineering Specialty

邢预恩,张根保

DOI: https://doi.org/10.3969/j.issn.1003-773x.2010.04.097

2010-01-01

Abstract:Developing students' engineering practice ability in majoring in mechanical engineering is a common problem of higher machinery engineering school.Three problems are discussed in this paper on cultivating student’s practical ability.

What problem does this paper attempt to address?

Exploration and practice on talent cultivation of experimental specialty for outstanding project-A case study of light chemical engineering specialty of ZUST

Zhijun HU,Hua CHEN,Xuejin ZHANG,Jing LI

DOI: https://doi.org/10.3969/j.issn.1671-8798.2016.06.011

2016-01-01

Abstract:Through analysis of the nature of engineering education and academic education ,the training concept on application‐oriented outstanding engineer was determined ,and the talent training system highlighting the characteristics of engineering was built .The educational reform was carried out by making use of industry advantage and industry background ,and exploration and practice of teaching was conducted by deep university‐enterprise cooperation for light chemical engineering , one of the experimental specialties for outstanding project . This is a salutary attempt to cultivate high‐quality engineering application‐oriented talents with engineering consciousness ,engineering practice ability and innovation ability .
Research-Driven Practice Teaching Reform of Automation Professional of Engineering Colleges

Yihua Liu,Guangzhou Zhao

DOI: https://doi.org/10.2991/icemaess-15.2016.151

2016-01-01

Abstract:As an important part of the process of application-oriented personnel training, practical teaching plays a special role in cultivating students' practical ability and innovative spiritual training, while theoretical teaching cannot. Based on many years of practice teaching mode reform, the research-driven practical teaching mode is summed up and addressed separately from the reform objectives, reform thinking, reform contents and related policies. The measures and experiences can also be extended to other engineering specialties.
Practice On Ability Cultivation Of Chemical Engineering Design To Postgraduate For Professional Degree In The Applied Chemistry And Chemical Engineering

Zhu Mingqiao,Tang Yue,Chen Fengqiu,Liu Yi,Ye Xiangqun

2011-01-01

Abstract:Practice on setting up a course of introduction to advanced chemical engineering design of postgraduate education for professional degree in the subject of chemical engineering and technology is described in the paper, in which it is emphasized that the cooperation of specialists from university and enterprise, and the innovative educational model, and a method to make experiments for cultivating inter-disciplinary and application-oriented high-level designers in the applied chemistry and chemical engineering.
Experiencing an Engineering Project to Cultivate the Engineering Ability

Liu Dezhong,Fu Shuigen,Lang Hong,Tian Yue

DOI: https://doi.org/10.3969/j.issn.1001-4233.2008.05.009

2008-01-01

Abstract:The purpose and plan of cultivating engineers should meet the needs of the society. Engineers should not only know the latest developments of technology worldwide, but also listen to the voices of national enterprises. Universities and colleges have the responsibility to encourage students to experience a real engineering project, which can help students to develop technology awareness and engineering ability. The work mode of teamwork for a project can provide practice for students, adapting them to the common working modes in the society. Teachers should only be advisers, not controllers, and practical teaching base where students do their internship should offer learning possibilities. Only in this way can students obtain knowledge on their own. The enlightenment is an internal process in which knowledge turns into practical skills. The quality of an engineer can be developed only through communication and interaction as well as demonstration and imitation between teachers and students.
Reform and Practice on Production Practice of Mechanical Specialty in Local College

Shen Jianying

2012-01-01

Abstract:Production practice is an important link to cultivate college students' engineering application ability and innovation practice ability. This paper summarizes the dilemma of the production practice under the new situation and puts forward some corresponding countermeasures and measures refer to the characteristics of the local college. The better effect is obtained through the implementation. It can extend the college students' knowledge and can cultivate college students' practical ability and engineering innovation ability, effectively improving the teaching quality of production practice.
Investigation and Practice of Engineering Practice Teaching Mode for Undergraduates of Chemical Engineering and Technology

Wang Fang,Zhang Hong,Chen Fengqiu

DOI: https://doi.org/10.3969/j.issn.1000-6168.2012.02.022

2012-01-01

Abstract:According to the goal of higher education,a new approach is proposed for training engineering talents with wide basic knowledge and strong practical innovation ability.With the construction of the system,reforms are made in teaching materials,expansion of the practice base and laboratory building for chemical specialty.Strengthening practice training in featured classes is performed,such as discipline-contest and graduate thesis/design,etc.In this way,student's engineering ability and comprehensive ability are upgraded and they can well adapt to the development of the social economy and meet the needs of the globalization.
Engineering Ability Oriented Basic Mechabical Experimental Teaching

WANG Qing-jiu,ZHONG Rui-ming,GU Da-qiang

DOI: https://doi.org/10.3969/j.issn.1006-7167.2011.11.035

2011-01-01

Abstract:With respect to the demands of engineering practice on experimental education of fundamental machinery,the authors believe that the ability of students in four aspects,namely proposal of problems,analyses,resolving and summarizing of those problems should be emphasized in the education of innovative engineers.An example of bearing experiment was presented to illustrate the promotion of the four abilities.The reformation methods of the course were discussed in terms of strengthening course content,innovation and active design of experiments,experimental devices of engineering and promotion of engineering background of tutors.
Exploration of the Teaching System of Engineering Practice in the Specialty of Vehicle Engineering

Hao Chen,Ying Zhou

DOI: https://doi.org/10.2991/ICEEMT-18.2018.98

2018-12-01

Abstract:Practical teaching is an important part of training personnel in vehicle engineering. This paper starts from the requirement of the practical teaching mode in the training of talents for vehicle engineering, and by analyzing the present situation and disadvantages of the practical teaching in the major of vehicle engineering, proposes a new system of the practical teaching in the major of vehicle engineering to cultivate students' comprehensive practical ability and innovative ability.

Engineering
Strengthen Practice Reform of Professional Teaching and Cultivate Students' Project Practice Ability

Sun Shuli,Wu Yang Fang,Qiu Qi,Liu Hua,Qiang

DOI: https://doi.org/10.4028/www.scientific.net/amr.591-593.2194

2012-01-01

Advanced Materials Research

Abstract:This paper gives a detailed discuss in the construction of teaching system, discusses the characteristics of professional teaching practice reform, and lays stress on the approaches and methods of the college students' engineering practical ability training. The reform consist of three fields, the first is designing of the professional teaching program based on the characteristics of engineering practice, which is composed of theory teaching and practice teaching system and Increase the proportion of professional teaching practice, give prominence to project practice. The second is strengthening the construction of inside workplace environment, cultivate of the students' engineering consciousness". The last is strengthening the humanism quality, innovative quality and engineering quality. In short, College students' comprehensive quality training is a systems engineering, No matter from teaching planned arrangements and implementation, or the actual environment construction, tremendous efforts are needed.
Engineering Practical Capacity Accelerate Technology Innovation

Shui-gen FU,Xiang-gui WEI,Jia-hai LIANG,Xiao-juan YAN

DOI: https://doi.org/10.3969/j.issn.1673-8314.2015.11.007

2015-01-01

Abstract:Traditional examination-oriented engineering technology talents cultivation programs lead to following problems:insufficient practical teaching hours, teachers lacking of engineering experience and students having poor practice capacity. Mod-ern engineering technology talents cultivation programs should place great emphasis on engineering practice, focus on practice teaching, centre on cultivating specialty capacity. Universities should integrate teaching program with current situation of China, strengthening students’ engineering practice capacity. The key function of engineering training center is to strengthen students’ en-gineering practice capacity, Some typical cases of engineering practical capacity accelerating technology innovation are presented. This paper is concluded by a formula of engineering technology innovation.
Study on Academic Growth and Ability Training of Students in Private Colleges and Universities with Engineering Cost Major as an Example

Liu Shi

DOI: https://doi.org/10.22158/wjer.v10n4p145

2023-08-27

World Journal of Educational Research

Abstract:In order to adapt to the actual demand for talents under the new era, new normal and new industrial background, and change the status quo of traditional engineering cost major in private colleges and universities, such as light practice and weak innovation consciousness. Through literature research, this paper obtains the ability cultivation model of engineering cost major students, including ideological and moral quality, ability to acquire knowledge, and ability to adapt to society. The questionnaire survey method and SPSS software are used to analyze the model. The analysis shows that students pay more attention to physical and mental health, practical ability, professional knowledge, learning ability, unity and cooperation, communication ability, adaptability and adaptability in the model. Finally, the article also puts forward some suggestions on the cultivation of some abilities, hoping to provide some suggestions for the reform of talent training objectives and programs in private colleges and universities, so as to improve the abilities of students majoring in engineering cost.
Exploration of Innovation Points of Cultivating High-Quality Talents under the Background of New Engineering

Xinyuan Zhang,Lingyi Meng,Guohao Cai,Linghui Geng,Qinghua Song,Shuo Liu

DOI: https://doi.org/10.54097/np4tsp59

2024-01-12

Abstract:Through literature analysis, questionnaire survey and field interviews, this paper statistically analyzes the professional data of six institutions containing engineering majors in Tangshan City, and then thoroughly analyzes the characteristic reform and innovation methods of four institutions, namely, North China University of Science and Technology, Tangshan Polytechnic College, Tangshan College and Tangshan Normal College, to explore how to cultivate high-caliber talents under the background of the new engineering discipline. The study finds that the cultivation of high-quality talents needs to highlight the following innovations: (1) Deepen the cultivation of students' comprehensive quality, strengthen the practical teaching link, and enhance the quality of talent cultivation, including professional knowledge, practical ability, and humanistic literacy, etc.; (2) "Project-based" drive students' independent innovation, including entrepreneurial plans, experimental development, and competitions, etc., to improve students' practical ability and innovation consciousness; (3) Parallel enterprise feedback to expand the boundaries of employment services, including explaining employment policies, analyzing the employment situation, teaching career choice skills and other ways. The research in this paper has certain reference significance for the cultivation of talents in colleges and universities under the background of new engineering disciplines, which is conducive to better cultivating high-quality talents in line with the needs of the society.
Analysis of the Cultivation Methods of Students’ Engineering Thinking Ability in the Teaching of Materials for Mechanical Engineering

Jing Zou,Jiayin Zou,Caihong Zhang,Kai Zheng

DOI: https://doi.org/10.18686/ahe.v4i9.2683

2020-11-04

Advances in Higher Education

Abstract:With the popularization and deepening of quality education in China, colleges and universities pay more and more attention to cultivating students’ thinking ability and innovation ability when carrying out education and teaching work. The course "Materials for Mechanical Engineering" is a traditional course in colleges and universities. In the traditional teaching mode, teachers often pay more attention to teaching students’ professional knowledge and ignore the training of students; thinking ability. In the new era of education reform, to better cultivate students’ engineering thinking ability in the teaching of the Materials for Mechanical Engineering course has become a question worth pondering. This article starts from the analysis of the teaching status of the Mechanical Engineering Materials course, focusing on the training strategies of students’ engineering thinking ability in the Mechanical Engineering Materials course teaching, hoping to further improve the teaching quality of the Mechanical Engineering Materials course in Chinese universities, to bring more comprehensive quality talents that meet the needs of social development.
Practice Of Teaching Mode Of Mechanical Engineering Integrative Experiment As An Independent Course

Shen Jianying,Li Jiwu

2011-01-01

Abstract:This paper analyzes the training orientation of mechanical engineering in local university in the popular education era and the shortcomings of traditional experimental teaching model. The teaching mode of mechanical engineering integrative experiment as an independent course was put forward and the good results have been achieved through practice, helping to train the applied high-level talents with the practical ability and creative ability.
The Discussion on Ability Cultivation Objective for Materials Science and Engineering Graduates of Applicationoriented Engineering Specialty

Qu Ming-yan

Abstract:Under the requirements of the professional training program of "A Plan for Educating and Training Outstanding Engineers"( PETOE),the qualities of graduates from local colleges are of great importance for the students' future development,the development of universities and local economy. According to the confirmation certificates of engineering education in China Engineering Education Accreditation Association( CEEAA),American certification system of Accreditation Board for Engineering and Technology( ABET EC2000),Institute of Engineering Education Taiwan engineering projects( EAC2010),capability for graduates are generally introduced for engineering faculty in this paper. This paper analyzed the qualifications that should be obtained by the graduates from the local colleges based on the personnel cultivation of Materials Science and Engineering in Jilin Institute of Chemical Technology and the reasons as well,which is supposed to provide guidance for the discipline construction of local colleges.

Materials Science,Engineering
Teaching Reformation and Practice on Mechanical Manufacturing Engineering for Outstanding Engineers' Training

Shen Jianying

2013-01-01

Abstract:Mechanical manufacturing engineering is an important professional basic course and degree course for mechanical design, manufacturing and automation and has an important position on the outstanding engineers' training program. The problems existed in the present course teaching of mechanical manufacturing engineering were detailed analyzed and the paper explored constructing the teaching curriculum system and teaching contents for the teaching of outstanding engineers' training and reforming the old, outdated teaching methods and means. The reformation results show that the students' learning enthusiasm and initiative are improved and their engineering consciousness and innovation ability have greatly been improved.
The Restrictive Factors in Cultivating Creative Engineering Talents in University and Its Countermeasures

刘怀玉,赵志新

DOI: https://doi.org/10.3969/j.issn.1005-2909.2003.03.003

2003-01-01

Abstract:Based on the historical experience and failure, and practical requirement, it is extremely important and urgent to cultivate the creative engineering talents. The authors analyze the major restrictive factors in training personnel, such as idealistic misunderstandings, shortage of high-qualified teachers, outdated teaching contents and demoded educational methods. As a result, some countermeasures are proposed, including: making the engineering educational target clear, constructing the professional staff, deepening the teaching innovation, establishing and improving the training mechanism.
Cultivation and Reform of Practice and Innovation Ability for Food Science and Engineering Specialty

Hai-jun CHANG,Wen-bin ZHOU,Jian-fei ZHU,Chong-jun WANG,Xu-xu ZHENG

DOI: https://doi.org/10.3969/j.issn.1001-9677.2016.01.058

2016-01-01

Abstract:The cultivation of practice and innovation ability for students during the higher education is an important issue. The current problems existed in the practice teaching of food science and engineering specialty were pointed out. Combined the exploration on practice teaching reform for food science in our school in recent years, the creative spirit and innovative ability of food science and engineering were discussed from the following aspects: the concept changes of practice teaching, practice consciousness education of students, reform of experimental teaching system and content, improvement of teaching and assessment methods, construction of teaching staff, laboratory opening, formation of research teams and build engineering experimental center, and so on. The practical teaching reform and innovation, and achieved certain results were discussed.
Analysis on Teaching Engineering Practice and Its Developing Trend

FU Shui-gen,LI Sheng-lu

DOI: https://doi.org/10.3969/j.issn.1672-2434.2005.03.001

2005-01-01

Abstract:On the review of the actuality of higher engineering education from both China and abroad, the paper analyses the advantages and disadvantages on teaching engineering practice in our country. And the article also preliminarily studies from the following: to build campus engineering training centre, continuously to develop the contact and cooperation with enterprises, to cultivate teaching staff with more certificates and skills, never-ending to develop innovative practical education, positively to carry out the research on engineering education.
Research on Requirement Courses, Teaching Characteristic and Talents Training of Mechanical Engineering in the University of California, San Diego

周琴,王成彪,吕建国,李伟青

DOI: https://doi.org/10.3969/j.issn.1006-9372.2009.01.017

2009-01-01

Abstract:Requirement courses of Mechanical Engineering in the University of California, San Diego were introduced and teaching characteristics were summarized in the paper. These courses and teaching methods help to improve capabilities of students, including self-study, cooperation, innovation and solve problems independence etc. These education traits in UCSD will benefit to cultivate talents and reform Mechanical Engineering education in China.

A Study on Cultivating of Engineering Practice Ability of the Mechanical Engineering Specialty

Exploration and practice on talent cultivation of experimental specialty for outstanding project-A case study of light chemical engineering specialty of ZUST

Research-Driven Practice Teaching Reform of Automation Professional of Engineering Colleges

Practice On Ability Cultivation Of Chemical Engineering Design To Postgraduate For Professional Degree In The Applied Chemistry And Chemical Engineering

Experiencing an Engineering Project to Cultivate the Engineering Ability

Reform and Practice on Production Practice of Mechanical Specialty in Local College

Investigation and Practice of Engineering Practice Teaching Mode for Undergraduates of Chemical Engineering and Technology

Engineering Ability Oriented Basic Mechabical Experimental Teaching

Exploration of the Teaching System of Engineering Practice in the Specialty of Vehicle Engineering

Strengthen Practice Reform of Professional Teaching and Cultivate Students' Project Practice Ability

Engineering Practical Capacity Accelerate Technology Innovation

Study on Academic Growth and Ability Training of Students in Private Colleges and Universities with Engineering Cost Major as an Example

Exploration of Innovation Points of Cultivating High-Quality Talents under the Background of New Engineering

Analysis of the Cultivation Methods of Students’ Engineering Thinking Ability in the Teaching of Materials for Mechanical Engineering

Practice Of Teaching Mode Of Mechanical Engineering Integrative Experiment As An Independent Course

The Discussion on Ability Cultivation Objective for Materials Science and Engineering Graduates of Applicationoriented Engineering Specialty

Teaching Reformation and Practice on Mechanical Manufacturing Engineering for Outstanding Engineers' Training

The Restrictive Factors in Cultivating Creative Engineering Talents in University and Its Countermeasures

Cultivation and Reform of Practice and Innovation Ability for Food Science and Engineering Specialty

Analysis on Teaching Engineering Practice and Its Developing Trend

Research on Requirement Courses, Teaching Characteristic and Talents Training of Mechanical Engineering in the University of California, San Diego