Abstract:Abstract The ideal work of adhesion (Wad), interfacial energy (σ), charge density, charge density difference and partial density of states (PDOS) of the γ-Fe (111)/α-Al2O3 (0001) interface were studied by the first-principles calculations method. The results indicated that three types of interface between Al2O3 (0001) and Fe (111) surface were formed, which are single Al (Al1-terminated), double Al (Al2-terminated) and O (O-terminated). Each type of interface established different stacking sequences, including Hcp-, Hole- and Top-site. The calculation of Wad and σ showed that the stacking sequence of the interface significantly affected the bonding strength and stability. In the optimized stable structure, the stacking sequences of the maximum Wad corresponding to the Al1-, Al2- and O-terminated interfaces are Hcp (0.65 J/m2), Hcp (3.92 J/m2) and Top (9.30 J/m2), respectively. Notably, the maximum Wad for the O-terminated interface is much larger than that for Al1- and Al2-terminated interfaces, implying the O-terminated interface is the largest bonding strength in all interfacial structures. Furthermore, the electronic properties of the interfaces revealed that the order of electron concentration is O-＞Al2-＞Al1-terminated, which vividly reflects the size interaction of the interfaces. Also, the bonds of the Al1-terminated interface are mainly covalent and little metallic bonds, while the Al2-terminated interface performed not only a mixture of metallic and covalent features but also a certain degree of ionic characteristics. Compared to Al1/2-terminated interfaces, the covalent ionic and metallic bonds are formed between Fe and Al/O for the O-terminated interface. Additionally, the type of chemical bond and the number of electron orbital hybrids at the interface are the fundamental reasons that affect the bonding strength of the interface.

Adhesion of the Γ-Ni(al)/α-al2o3 Interface: a First-Principles Assessment

Adhesion of the γ-Ni(Al)/α-Al<sub>2</sub>O<sub>3</sub> interface: a first-principles assessment

Pt Effects in Γ-Ni(al)/α-al 2 O 3 Adhesion

Site preference of S-doping and its influence on the properties of a Ni/Ni3Al interface

First-principle Study of Interfacial Properties of Ni–Ni3Si Composite

First Principles Assessment of Metal/Oxide Interface Adhesion

Effect of Substrate Characteristics on Interdiffusion Coefficients of Ni and Al Atoms in Β-Nial Phase of Aluminide Coatings

Strengthening Mechanisms of Reactive Element Hf on Key Interface in Thermal Barrier Coating Systems Based on First-Principles

First-Principles Calculation On Adhesions Of Ni/Al2o3 And Ni/Zro2 Interfaces

A First-Principles Study on Interfacial Properties of Ni(001)/Ni3Nb(001)

Interfacial Stoichiometry and Adhesion at Metal/α‐Al2O3 Interfaces

Effects of Rare-Earth Dopants on the Thermally Grown Al2o3/Ni(Al) Interface: the First-Principles Prediction

First-principles Calculation on the Adhesion Strength, Fracture Mechanism, Interfacial Bonding of the NiTi (111)//Α-Al2o3 (0001) Interfaces

Adhesion, Stability and Electronic Properties of Ti2AlN(0001)/TiAl(111) Coherent Interface from First-Principles Calculation

Adhesion strength and bonding mechanism of γ-Fe (111)/α-Al2O3 (0001) interfaces with different terminations

Shear Strength and Sliding Behavior of Ni/Al_2O_3 Interfaces: A First-Principle Study

Influence of Alloying Elements on Stability and Adhesion Ability of TiAl/TiO2 Interface by First-Principles Calculations

First‐Principle Calculation of the Hydrogen Adsorption and Diffusion Characteristics at an Ni3Al/Ni Interface

Understanding solid phase diffusion-bonding process of Ni (000)/α-Al2O3 (0001) interface

Interfacial thermodynamics and impurity effects on internally oxidized Cu/Al2O3 interface

Pinning Effect of Reactive Elements on Adhesion Energy and Adhesive Strength of Incoherent Al2O3/NiAl Interface.