Abstract:Chemical looping combustion (CLC) is a novel technology with inherent CO2 capture, especially for solid fuels. The existence of ash in solid fuels is one major challenge for CLC technology development. In this work, interaction between an iron-based oxygen carrier and four different types of coal ash was studied in a laboratory-scale fluidized reactor. Different factors - the ash component, the redox cycle number, and the ash size - were taken into account. Chemical composition of the ash had effect on the reduction time from Fe2O3 to Fe3O4 in the fluidized bed. The presence of reactive components (such as Fe2O3 and CaSO4) in the ash, functioning as oxygen carriers, extended the reduction time. However, the chemical combination between the ash contents and the carrier can shorten the reduction time. The effect of ash on the carrier's reactivity depended on the ash type. Most ashes decreased the reactivity of the carrier, except the ash mainly composed of CaSO4 which showed an increased reactivity due to the deposited reactive CaSO4. The effect of ash on decreasing the carrier's reactivity increased with the cycles. Meanwhile, the larger ash (900-1000 mu m) corresponded to a higher CO conversion, and thus had less effect on the reactivity than the smaller ash (300-400 mu m). This occurrence can be attributed to the non-uniform solid-solid contact between the larger ash and the carrier. Sintering and agglomeration of the carrier particles occurred in the existence of most ashes, except the lignite ash enriched in CaO. Ash deposition and the formation of new compounds were detected. One common compound formed in the presence of SiO2-rich ash was Fe2SiO4, which has a low melt point (1170 degrees C) and a low thermal conductivity with a greater adhesion. The physical ash deposition and the formation of Fe2SiO4 through chemical reactions were proposed to be the main reasons for the effect of ash on the carrier's reactivity and the occurrence of sintering and agglomeration. The existence of ash not only has impact on the carrier's reactivity, but also causes solid fluidization disturbances. More effort is deserved to put into the ash-related issue in solid fuel CLC. (C) 2013 Elsevier Ltd. All rights reserved.

Development of Binder-Supported CaSO4 Oxygen Carriers for Chemical Looping Combustion of Methane

Chemical Looping Combustion of a Typical Lignite with a CaSO4–CuO Mixed Oxygen Carrier

Chemical Looping Combustion Characteristics of Coal with a Novel CaSO4–Ca2CuO3 Mixed Oxygen Carrier

Performance of Fe2O3/CaSO4 Composite Oxygen Carrier on Inhibition of Sulfur Release in Calcium-Based Chemical Looping Combustion

Reaction characteristics investigation of CeO2-enhanced CaSO4 oxygen carrier with lignite

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Effect of hematite addition to CaSO4 oxygen carrier in chemical looping combustion of coal char

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

CO2 Capture and Desulfurization in Chemical Looping Combustion of Coal with a CaSO4 Oxygen Carrier

Selecting and Testing of Cement-Bonded Magnetite and Chalcopyrite as Oxygen Carrier for Chemical-Looping Combustion

Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture

Study on the Performance of the Purified CaSO4 Oxygen Carrier Derived from Wet Flue Gas Desulphurization Slag in Coal Chemical Looping Combustion

Interaction Between Iron-Based Oxygen Carrier and Four Coal Ashes During Chemical Looping Combustion

Development of CuO-based oxygen carriers supported on diatomite and kaolin for chemical looping combustion

Modification of Traditionally Impregnated Fe2O3/Al2O3 Oxygen Carriers by Ultrasonic Method and Their Performance in Chemical Looping Combustion

Effect of Support Material on Carbonation and Sulfation of Synthetic Cao-Based Sorbents in Calcium Looping Cycle

Experimental Study of Desulfurization of Chemical-Loping Combustion of Coal With Calcium-based Oxygen Carrier

Sintering and Agglomeration Characteristics of Industrially Prepared CaMn0.5Ti0.375Fe0.125O3-δ Perovskite Oxygen Carrier in Chemical Looping Combustion

Wet Mixing Combustion Synthesis of CaO-based Sorbents for High Temperature Cyclic CO2 Capture

Comparative investigation on CO2 uptake performance of limestone-derived sorbents with different supports synthesized by impregnated layer solution combustion method

Competition between reduction reaction and carbon deposition for CaSO4 oxygen carrier in chemical-looping combustion: A first-principle study and reaction equilibrium analysis