Abstract:This work investigates the possibility of using LaMn0.7Fe0.3O3.15@mSiO(2) as oxygen carriers for chemical looping combustion (CLC). CLC is a new combustion technique with inherent separation of CO, from atmospheric N-2. LaMn0.7Fe0.3O3.15@mSiO(2) core shell materials were prepared by coating a layer of mesostructured silica around the agglomerated perovskite particles. The oxygen carriers were characterized using different methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 sorption, hydrogen temperature-programmed reduction (H-2-TPR), and temperature-programmed desorption of oxygen (TPD-O-2). The reactivity and stability of the carrier materials were tested in a special reactor, allowing for short contact time between the fluidized carrier and the reactive gas [Chemical Reactor Engineering Centre (CREC) fluidized riser simulator]. Multiple reduction oxidation cycles were performed. TEM images of the carriers showed that a perfect mesoporous silica layer was formed around samples with 4, 32, and 55 nm in thickness. The oxygen carriers having a core shell structure showed higher reactivity and stability during 10 repeated redox cycles compared to the LaMn0.7Fe0.3O3.15 core. This could be due to a protective role of the silica shell against sintering of the particles during repeated cycles under CLC conditions. The agglomeration of the particles, which occurred at high temperatures during CLC cycles, is more controllable in the core shell-structured carriers, as confirmed by SEM images. XRD patterns confirmed that the crystal structure of all perovskites remained unchanged after multiple redox cycles. Methane conversion and partial conversion to CO, were observed to increase with the contact time between methane and the carrier. Indeed, more oxygen from the carrier surface, grain boundaries, and even from the bulk lattice was released to react with methane. Upon rising the contact time, less CO was formed, which is desirable for CLC application. Increasing the reaction temperature and methane partial pressure lead to enhanced conversions of CH4 under CLC conditions.

Sintering and Agglomeration Characteristics of Industrially Prepared CaMn0.5Ti0.375Fe0.125O3-δ Perovskite Oxygen Carrier in Chemical Looping Combustion

Industry-scale Production of a Perovskite Oxide As Oxygen Carrier Material in Chemical Looping

Thermochemically Stable Novel Oxygen Carriers Based on CaMn1- x- y Ti x Fe y O3-δ for Chemical Looping

Heterogeneous Reaction Kinetics of a Perovskite Oxygen Carrier for Chemical Looping Combustion Coupled with Oxygen Uncoupling

Oxidization and Reduction Kinetics of a Manganese Oxygen Carrier Granulated with the Spray Drying Method at a Tonnage Scale for Chemical Looping Combustion

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Activation Mechanism of Fe2O3-Al2O3 Oxygen Carrier in Chemical Looping Combustion

Perovskite Oxygen Carrier with Chemical Memory under Reversible Chemical Looping Conditions with and Without SO2 During Reduction

A High-Performance Oxygen Carrier with High Oxygen Transport Capacity and Redox Stability for Chemical Looping Combustion

Insights into the Relationship Between Microstructural Evolution and Deactivation of Al2O3 Supported Fe2O3 Oxygen Carrier in Chemical Looping Combustion

Selecting and Testing of Cement-Bonded Magnetite and Chalcopyrite as Oxygen Carrier for Chemical-Looping Combustion

LaFe0.8Co0.15Cu0.05O3 Supported on Silicalite-1 as a Durable Oxygen Carrier for Chemical Looping Reforming of CH4 Coupled with CO2 Reduction

Mn-Fe-Al-O Mixed Spinel Oxides As Oxygen Carrier for Chemical Looping Hydrogen Production with CO2 Capture

Fast Redox Kinetics of a Perovskite Oxygen Carrier Measured Using Micro-Fluidized Bed Thermogravimetric Analysis

Defluidization Conditions for a Fluidized Bed of Iron Oxide-, Nickel Oxide-, and Manganese Oxide-Containing Oxygen Carriers for Chemical-Looping Combustion

Achieving surface and bulk rate matching for chemical looping partial oxidation of methane by modulating oxygen transport

Modification of Traditionally Impregnated Fe2O3/Al2O3 Oxygen Carriers by Ultrasonic Method and Their Performance in Chemical Looping Combustion

50-kWth methane/air chemical looping combustion tests with commercially prepared CuO-Fe2O3-alumina oxygen carrier with two different techniques

Mechanism of solid state diffusion on the performance evolution of iron-based oxygen carrier at different operating conditions for chemical looping process

Migration of lattice oxygen during chemical looping dry reforming of methane with Ca2Fe2O5/Zr0.5Ce0.5O2 oxygen carrier

Investigation on the Oxygen-Carrying Performance and Reaction Kinetics of Camnxfe1−Xo3−Δ Perovskites Prepared from Red Mud