Abstract:The redistribution of stress caused by excavation procedure is one of the most important reasons leading to surrounding rock deformation and fracture in underground engineering. Ka Fang polymetallic mining field of Yunnan Tin Industry Corp as chosen as the stud) object, the finite element software ADINA, through which defining the element birth and death to confirm the excavation sequence, vas used it) simulate the exploitation and filling processes. In order to analyze the stability of surrounding rock, the distribution and variation rules of surrounding rock's stress field and displacement field were got. The research indicated that the stress and the displacement are gradually increased with the excavation advancing step by step. Until exploitation was finished, The maximum compress stress and the maximum tension stress of artificial pillar are -3.1 MPa and 0.38 MPa separately, the maximum compress stress of the upper and the footwall surrounding rock are -41.6 MPa and -36.6 MPa, the maximum tension stress are 1.22MPa and 1.62 MPa, which are small than the ultimate stress of surrounding rock. At the same time, the maximum settlement and floor heave reach 39.1 mm and 10.9 mm separately. After filling the mined-out area by gangue, the maximum compress stress of artificial pillar is -3.19 MPa, and no tension stress, the maximum compress stress of the upper and the footwall surrounding rock decrease into -31.7 MPa and -27.2 MPa separately, the maximum tension stresses fall to 0,69 MPa and 0.77 MPa, the maximum settlement and floor heave arrive 54.3 mm, 10.4mm. Because of backfilled gangue, the stress of surrounding rock and the floor heave are distinctly decreased, and artificial pillar supporting capacity is also strengthened. T he result is that the stability of surrounding, rock gets improvement. The conclusion is also meaningful for guiding the construction of similar projects.

ANSYS-Based Stability Analysis of Stope

Mining of rich iron ore deposits of complex structure under the conditions of rock pressure development

Stability Evaluation and Structural Parameters Optimization of Stope Based on Area Bearing Theory

Numerical Analysis of Stope Stability Based on Coupling of MIDAS/GTS and FLAC3D

Simulation of the Second-pillar Mining Stope Excavation and Its Stability Analysis Based on ANSYS

Numerical Simulation Modeling and Calculation Analysis on Stope Roof Stability under the Complex Geological Conditions in Deep Mining

Numerical Simulation on Structure Parameters of Stope for Mining under Railway

Stope Structure Parameters Optimization of Houguanyin Mountain

Stability Numerical Analysis of Artificial Roof Filling Body

Stability analysis of rock fracture and support performance in steeply dipping ore deposits with massive mining stopes

Stability Analysis of Stope Roof-pillar Based on Cusp Catastrophe Model

Study on Numerical Simulation of Structure Parameters of Underground Stope

Numerical Simulation for Stability of Stope under Different Stress Conditions

Stability assessment of surrounding rock in downward mining route supported by slab-wall backfill structure

A Simulation Analysis of the Stability of Tall and Collapse-Prone Stopes: A Case Study of the Dongguashan Copper Mine

Stability Analysis Of Surrounding Rock Mass And Numerical Simulation Of The Exploitation Process In Underground Stope

Stability Analyses and Cable Bolt Support Design for A Deep Large-Span Stope at the Hongtoushan Mine, China

Optimization of stope structure parameters by combining Mathews stability chart method with numerical analysis in Halazi iron mine

Stability analysis of open-pit gold mine slopes and optimization of mining scheme in Inner Mongolia, China

Numerical Simulation on Stability of Complicated Goal

Deformation and stability analysis of underground stope after excavation considering strain softening