Abstract:A composite titania thin film consisted of quasi-aligned single-crystalline rutile nanorods embedded in sol-gel-derived anatase aggregates was fabricated and its photoelectrochemical behavior was studied in detail. A monolayer of nearly sing I e-crystal line rutile nanorods was first deposited on metallic Ti substrates through a controlled reaction between Ti and hydrogen peroxide. The gaps among the rutile nanorods were then filled with titania nanoparticles through a sol-gel dip-coating approach, which achieved a composite thin film of single-crystalline rutile nanorods embedded in anatase aggregates, after a subsequent thermal treatment at 723 K. The X-ray diffraction measurement revealed that the composite film with thickness of 180 nm contained anatase and rutile in a nearly 50:50 ratio. The UV-visible diffusive reflectance spectra estimated a band gap of 2.99 eV for the rutile monolayer and a slightly increased value of 3.03 eV for the composite film due to the embedding of the anatase nanoparticles. Photocurrent versus potential diagrams, photocurrent transient curves, and open-circuit potential measurement supported the fact that the anatase nanoparticles possessed better inherent photoelectrochemical properties than rutile. However, electrochemical impedance spectra characterization, together with photocurrent transient curves and open-circuit potential measurement, suggests that the single-crystalline rutile nanorods exhibited a higher electron-transfer rate. The combination of the two components in such an appropriate way enhanced significantly the charge separation effect arising from the anatase/rutile couple, which hence combined efficiently the "mixed crystal effect" and the "mixed morphological effect". A steady-state photocurrent more than double the simple sum of those generated by the two components alone was detected for the current composite film, which can be attributed to the single-crystalline rutile nanorods that provide channels for rapid electron transfer to the conductive Ti substrates under an applied bias potential. As a result, this study concludes that the present nanostructure magnified significantly the well-established mixed crystal effect, that is, an enhanced charge separation arising from a mixture of anatase and rutile.

Enhanced Energy Conversion Efficiency of the Sr2+-Modified Nanoporous Tio2 Electrode Sensitized with A Ruthenium Complex

Synthesis of Rhenium(I) Bipyridyl and Ruthenium(Ii) Tris-Bipyridyl Photosensitive Dyes Used for Solar Cells

Photocurrent Enhancement by Employing 2,6-Bis[1-(2,4,6-trimethyl-phenylimino)ethyl]Pyridine as a Co-Sensitizer with Ruthenium in Dye Sensitized Solar Cell

Efficiency of Ruthenium Dye Sensitized Solar Cells Enhanced by 2,6-Bis[1-(phenylimino)ethyl]pyridine As a Co-Sensitizer Containing Methyl Substituents on Its Phenyl Rings.

Enhance the Performance of Co-Sensitized Solar Cell by a Series Efficient Pyridine-Anchor Co-Adsorbents of N,N′-bis((pyridin-2-yl)methylene)-p-phenylenediimine and a Ruthenium Dye of N719

Enhanced Performance of Ruthenium Dye-Sensitized Solar Cell by Employing an Organic Co-Adsorbent of N , N ’-Bis((pyridin-2-yl)(methyl) Methylene)- O -Phenylenediamine

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Effects of rubrene co-sensitized TiO 2 photoanode on the performance of ruthenium dye N719 sensitized solar cells

High Efficiency Co-Sensitized Solar Cell Based on Luminescent Lanthanide Complexes with Pyridine-2,6-Dicarboxylic Acid Ligands

Enhanced photovoltaic performance of dye-sensitized solar cells using a new photoelectrode material: upconversion YbF3-Ho/TiO2 nanoheterostructures

Enhance the Performances of Dye-Sensitized Solar Cell by a New Type of Sensitizer to Co-Sensitize Zinc Oxide Photoelectrode with Ruthenium Complex

Enhance the Optical Absorptivity of Nanocrystalline TiO2 Film with High Molar Extinction Coefficient Ruthenium Sensitizers for High Performance Dye-Sensitized Solar Cells.

Photoelectric Behavior of Nanocrystalline TiO2 Electrode with a Novel Terpyridyl Ruthenium Complex

Highly Efficient Charge Transfer From A Trans-Ruthenium Bipyridine Complex To Nanocrystalline Tio2 Particles

An Extremely High Molar Extinction Coefficient Ruthenium Sensitizer in Dye-Sensitized Solar Cells: the Effects of Π-Conjugation Extension

Significant Influence of TiO2 Photoelectrode Morphology on the Energy Conversion Efficiency of N719 Dye-Sensitized Solar Cell

Amphiphilic Polypyridyl Ruthenium Complexes with Substituted 2,2 '-Dipyridylamine Ligands for Nanocrystalline Dye-Sensitized Solar Cells

On the structural variations of Ru(II) complexes for dye-sensitized solar cells

Enhanced Photoelectrochemical Response of a Composite Titania Thin Film with Single-Crystalline Rutile Nanorods Embedded in Anatase Aggregates

A Highly Efficient Solar Cell Made from A Dye-Modified Zno-Covered Tio2 Nanoporous Electrode

A new heteroleptic ruthenium sensitizer enhances the absorptivity of mesoporous titania film for a high efficiency dye-sensitized solar cell.