Abstract:Lithium-manganese-rich layered oxides are of great importance as cathode materials for rechargeable lithium batteries. In this article, Li1.2Mn0.567Ni0.167Co0.066O2 is prepared by a co-precipitation method, and the delaminated MnO2 nanosheets with different amounts, 1 wt%, 3 wt% and 5 wt%, are introduced for coating this material for the first time. The structure and morphology of these materials have been investigated via X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterizations. The results clearly demonstrate that the surface of lithium-manganese-rich layered oxides is covered by continuous delaminated MnO2 nanosheets. The electrochemical properties including the discharge capacity, initial coulombic efficiency, rate capability and cycle stability of these coated materials have been greatly enhanced, which are obviously related to the delaminated MnO2 nanosheet coating with good electrochemical activity and low charge transfer resistance. Moreover, the lithium-manganese-rich layered oxide coated with 3 wt% delaminated MnO2 nanosheets presents the best comprehensive electrochemical properties as well as improves the initial discharge capacity and coulombic efficiency by 299 mA h g(-1) and 88% respectively; the capacity retention after 50 cycles also reaches 93%, and the discharge capacity can be 157 mA h g(-1) even at a 5 C discharge rate.

Structure and Properties of Layered Manganese–vanadium Oxide As a Cathode Material for Lithium Secondary Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Nanostructured Mn-Doped V2O5 Cathode Material Fabricated from Layered Vanadium Jarosite

Enhanced Stability of Vanadium-Doped Li1.2Ni0.16Co0.08Mn0.56O2 Cathode Materials for Superior Li-ion Batteries

A high-capacity, low-cost layered sodium manganese oxide material as cathode for sodium-ion batteries.

Towards a Stable Layered Vanadium Oxide Cathode for High-Capacity Calcium Batteries

Enhanced Electrochemical Performance of Li[Li0.2ni0.2mn0.6]O-2 Modified by Manganese Oxide Coating for Lithium-Ion Batteries

Al/Mn co-doping endows V2O5•4VO2 cathode with enhanced lithium storage performance

Progress on Lithium Manganese Oxide As Cathode Materials of Lithium Ion Secondary Battery

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Synthesis and Electrochemical Performance of Li1+xV3O8 As Cathode Material for Lithium Secondary Batteries

Characterization of structure and electrochemical properties of lithium manganese oxides for lithium secondary batteries hydrothermally synthesized from δ-KxMnO2

Internal Vanadium doping and external modification design of P2‐type layered Mn‐based oxides as competitive cathodes toward Sodium‐ion Batteries

Vanadium-Doped Lithium-Rich Layered-Structured Cathode Material Li1.2ni0.2mn0.6o2 with A High Specific Capacity and Improved Rate Performance

High-energy 'composite' Layered Manganese-Rich Cathode Materials Via Controlling Li2MnO3 Phase Activation for Lithium-Ion Batteries.

Highly Reversible Anion Redox of Manganese‐Based Cathode Material Realized by Electrochemical Ion Exchange for Lithium‐Ion Batteries

Structural and electrochemical performance of layered high-Mn cathode materials Li1+n[NimComMn1-2m]O 2 for lithium rechargeable batteries

Nickel pre-intercalated bilayer vanadium pentoxide hydrate for reversible structural evolution in Na-ion battery cathode

Surface Coating of Lithium–manganese-Rich Layered Oxides with Delaminated MnO2 Nanosheets As Cathode Materials for Li-ion Batteries

Topologically protected oxygen redox in a layered manganese oxide cathode for sustainable batteries

Synthesis and Electrochemical Properties of LixMnO2 Catho des Materials