The Application of CAN-Bus in Fog Lamp Control Module

吴刚

DOI: https://doi.org/10.3969/j.issn.1673-3142.2009.08.015

2009-01-01

Abstract:The lamp control system based on CAN system is constructed under research in the fog lamp control module. Moreover, the control system and communication agreement has been established, including the main module of the fog lamp control module, a controller of vehicle lamps, set function is achieved using CAN-Bus.

What problem does this paper attempt to address?

Design of Real-Time Fuzzy Controller and Application in CAN Bus Control Systems

HAN An-tai,WANG Shu-qing

DOI: https://doi.org/10.3969/j.issn.1007-449x.2005.04.011

2005-01-01

Abstract:A real - time fuzzy control algorithm is presented in this paper, and the realization way for a class of motion control systems is analyzed; then the fuzzy motion control system based on CAN field bus is implemented. Both the overall architecture of the system and the design of field motion controller are proposed here. The experiments results show that the proposed fuzzy control system has better performance in the rapid response real - time and precision and is useful in motion control system.
The design of electric motor car's body network based on CAN-bus distributed control

Wang Jianfeng,Wang Dafang,Xiong Jie

DOI: https://doi.org/10.1109/CCDC.2009.5191511

2009-01-01

Abstract:CAN-bus is a typical bus control technology, and is now widely applied in many areas.In view of the characteristics of the electric vehicle body, this paper puts forward a plan that applies CAN-bus technology to build electric vehicle body network. In terms of the electric vehicle body system, it needs to resolve several issues: One is to simplify electronic wiring harness as far as possible, and the other is to ensure the normal data communications. In this article, the body electrical is divided into different nodes in accordance with the principles of proximity, each node controls a certain area of electrical equipment, and at the same time, communicates with other nodes through CAN bus. CAN bus used SAE1939 agreement and defined message through this agreement. Each body node of the circuit includes main circuit board and extended board. The main circuit can achieve the requirements of data communications; the extended board can achieve the expansion of body electrical. The circuits are divided into several modules in application with circuit modular design approach. Every module was respectively developed by embedded software system through some software development tools, at the same time, tested the entire body CAN network communications systems. After the test, the entire body of communications network can meet the requirements.
Research on New Energy Automatic Lighting Control System Based on the CAN-Bus

Feijun Xu

DOI: https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMR.1079-1080.998

2014-12-01

Abstract:With the continuousdevelopment of modern new energy technologies, Hyundai automation andincreasingly high degree of intelligence, automotive lighting control system isto ensure safe driving is an important part, in order to ensure the safety andconvenience of road lighting, reducing the driver's labor strength, appeared ona variety of new automotive lighting control system, commonly used in daytimerunning auto-dimming, automatic lighting system, the beam adjustment system,delay control. Applications CAN bus can not only simplify the wiring harness toachieve vehicle information sharing, reduce system cost, but also greatlyreduce the failure rate of vehicle lights, and extend lamp life.

Environmental Science,Engineering
The Design of Tobacco Leaf Roasting Savory Temperature & Humidity Control Node Based on CAN Bus

Chao Xu

2009-01-01

Abstract:Based on the reality of compressed roast house built together at present, the node of tobacco leaf roasting savory temperature humidity control based on CAN bus was designed. Using bus technology, it can convey data between node and top machine, control center can monitor every node in time. In connection with different require of temperature and humidity of five roast period during tobacco leaf roasting, CAN node use Fuzzy_PID technology, decrease difference in temperature between roast house top and bottom, achieve fundamental leveling of temperature through adjusting rotate speed of axle flow draught fan, the node can achieve heating up and steadying temperature through controlling oxygen quantity of coal burning by adjusting rotate speed of oxygen fan, the node can keep humidity smooth in roast house by controlling quantity of air entering roast house.
Applying Research of CANBUS in Real Control System

Hong Wang

2002-01-01

Abstract:Intelligence module and its distribution system has already been applied successfully in sports control,train control and process control system.This paper makes a detail analysis on the application of the intelligence distribution system based on CANBUS technology in DC motor.The experiment reaches a good result in terms of ruining autonation information insulation island.
Design and Application of CAN/LIN Gateway Controller in Automotive Body Network

Wei Wei,Yao Wei,Zhang Wei

DOI: https://doi.org/10.3969/j.issn.1000-3886.2008.02.014

2008-01-01

Abstract:Utilizing the different characteristics of CAN and LIN bus protocol,a CAN/LIN gateway controller is built based on the main MCU of MC68HC08AZ60A.The communication of CAN/LIN is fulfilled,also with the implementation of car body network control.And for actual application,the design of low power and fauh-self-diagnosis is finished.
Design and Implementation of a Smart Networking Control System for LED Lighting Based on CAN.

Qi Zhang,Qinfu Qiu,Xiong Chen

DOI: https://doi.org/10.1504/ijwmc.2013.057581

2013-01-01

International Journal of Wireless and Mobile Computing

Abstract:The paper describes a smart networking control system for remote monitoring and controlling of lighting networks based on CAN bus. The nodes of network are LED lamps and environment sensors. The system provides LED lighting dimming control of a single lamp or a group of lamps. The master node will remote monitor the lighting condition of LED lamps and control the status of lighting system. The system was implemented in a simple lighting network based on CAN 2.0B, with the MCU using C8051F340. The driver for LED lamps uses PT4107 as the switching power supply chip and the dimming mode is based on PWM signal. The B&R PLC master the whole network as the host computer. Applications for this system include indoor lighting condition where it is desired to control LED lamps for saving energy consumption and creating various lighting effects.
Design of Building Automation System Based on CAN Bus

GU Yujie,XIE Da,ZHANG Ming,AI Qian

2010-01-01

Abstract:A scheme of building automation system based on CAN bus was proposed,which included hardware and software design of main control modules,CAN modules,communication modules. According to the CAN protocol standard,an application layer protocol for the signal acquisition was set up,which contained the definition of extended frame format with 29 Bytes of ID with four different functions and the design of the data format. With this protocol,the speed and the reliability of transmission were improved.
Design of the Control System Based on CAN-Bus of Scrap Basket Car

Wang Zhiqiang,Wang Jie,Zhang Shuyuan,Zeng Zhiwei

2007-01-01

Abstract:A control system based on CAN-bus of scrap basket car is proposed.Communications via CAN-bus within the system is carried out among PLC,display,and PVED-CC which is electric hydraulic actuator for the Sauer-Danfoss company PVG valves system.The control flow of the system and design of the human-machine interface are discussed.
Design and Implementation of FCS Intelligent Control System for Greenhouse Based on CAN-Bus

GUO Jia,REN Bo,ZHANG Kan-yu

DOI: https://doi.org/10.3969/j.issn.1001-9944.2010.09.009

2010-01-01

Abstract:An intelligent control system for greenhouse was realized based on CAN field bus communication in this paper.Fuzzy decoupling technology was applied to decouple the temperature and humidity control loops.A tidy expert controller was embedded to compensation interactions of other environmental factors and implement varied flexible expert control strategies under complex conditions.The performance curves of heating and venting on site show that the intelligent control system designed is reliable with high precision and stable communication and can good meet the requirements of greenhouse production control.
The Design of AMT communication module based on CAN bus

SUN YONG-JUN,LU TONG-LI,ZHANG JIAN-WU

2007-01-01

Abstract:Nowadays,Intelligent Shift control of AMT is the direction of development and research within the automatic transmission area,and how to gain reliable information of car is the key factor of achieving this object. CAN bus is one of the most widely applied field bus,this paper introduces a design method to establish the AMT communication module based on CAN bus,which includes hardware design,data definition and software design,and finally achieving the implementation of data communication among engine,EPS,ABS and AMT. This Provides a basis for the implementation of intelligent shift.
The Control of Electric Vehicles Based on CAN Network

CAO Jun-yi,WU Bao-feng,CAO Bing-gang

DOI: https://doi.org/10.3969/j.issn.1001-3881.2005.11.050

2005-01-01

Abstract:The network control architecture of electric vehicles(EV) based on CAN bus was constructed,in which regional autonomy,function distribution and hierarchy methods were adopted.Network control unit and in-vehicle gateway were designed,and transmitting methods and properties of data in the network were discussed.This architecture might reduce difficulties in installation and maintenance,improve the system reliability and real-time of manipulation,and obtain the reasonable distribution of energy.
The Research On The Test System of CAN Bus For Electric Vehicles Based On The Software of CANoe

Zhang Jun

DOI: https://doi.org/10.3969/j.issn.1006-8244.2012.03.002

2012-01-01

Abstract:The application of CAN bus on the electric vehicles are introduced. The real-time test system is established by applying the software of CANoe. The System Includes the functions of the real-car testing, offline analysis and nodes simulation.
The Development of CAN Bus Communication for Fuel Cell Vehicle

Ao Guoqiang,Yang Lin,Zhu Jianxin,Zhou Xingli,Zhuo Bin

DOI: https://doi.org/10.3321/j.issn:1002-8331.2006.16.071

2006-01-01

Abstract:The application of CAN bus in automobile is introduced concisely.The bit time setting,communication interface,the structure of data frame and the key points of CAN bus communication development with the MC68376's on-chip CAN controller are presented in detail.The network which complied with the SAE J1939 protocol is realized and applied to fuel cell vehicle.The results show that communication rate reach 500kbps with low bit error rate,good real-time and high reliability performance.
Application design of CAN bus in tractor test bench

wu feng,sun jun,feng an,yang zhijia,zhu jianxin

DOI: https://doi.org/10.3321/j.issn:1002-6819.2005.06.017

2005-01-01

Abstract:<Abstrcat> A data sample system based on CAN bus of tractor test bench was introduced in this paper. Some (problems) of traditional test bench were solved, such as complex in setting wire, low level of reliability, unfit for connection to net. This system consists of five CAN nodes, each of them can finish the correlative test and send the data to main PC. The main PC communicates with the CAN nodes through PC-CAN adapter. Hardware and software design for the CAN nodes and PC-CAN adapter and system debugging were finished in this project.
Application of CAN Bus System in Hybrid Electric Vehicle

朱正礼,殷承良,张建武

DOI: https://doi.org/10.3321/j.issn:1671-1637.2004.03.021

2004-01-01

Journal of Traffic and Transportation Engineering

Abstract:The paper described the necessity of applying CAN (controller area network) to hybrid electric vehicle, analyzed the high reliability and flexibility of CAN, and the characteristics and protocol of the bus. The research on the realization of CAN bus system was carried out by using three buses in the design. Experiment results prove that the system is feasible, because it can fulfill the requirements of hybrid electric vehicles. The loading of CAN bus is lower, the error ratio is about 10~(-8)～10~(-6) when the transmission rate is middle or high, and the power consumption is lower than the design requirement. 3 tabs, 4 figs, 9 refs.
Design and Analysis of Multi-Node CAN Bus for Diesel Hybrid Electric Vehicle

Xianyin Mao,Jun hua Song,Junxi Wang,Hang bo Tang,Zhuo Bin

DOI: https://doi.org/10.5772/intechopen.84040

2011-01-01

Abstract:The hardware and software design of the controller area network(CAN) bus for diesel hybrid(electric) vehicle were presented based on both the protocols CAN2.0B and J1939.This paper analyzed the design methods of CAN communication of routine for improving response time.These methods include buffer time-sharing,time-sharing transmit and receive and priority assignment.The self test of signal control module using USBCAN card,and the hardware in the loop test and bench test with multi-control module show that the maximum load rate of the whole hybrid powertrain system is 28%,which is in accord with the requirement of the hybrid electric bus.The quality of communication is reliable.
The Application Of An Improved Can-Bus In Flight Simulator

Shupeng Zheng,Feng Liao,Jingfeng He,Junwei Han

2008-01-01

Abstract:The flight simulator interface system communication network should meet requirements of determinism, real-time and reliability. This paper analyses the real-time problem of CAN-Bus with its application in flight simulator interface system. And on the basis Of basic CAN protocol, an improving method for CAN- Bus is proposed. The method divides the extended frame with CAN 2.0B into priority class subfield, queue position subfield and message filtering subfield. Through the design of system-wide priority queues and cyclical priority scheduling algorithm, the problem of message blockage caused by the CAN stochastic multi-master sending message mode is solved. Tests in the flight simulator interface system show that the improved CAN-Bus with above method has good real-time performance in heavy network load.
The Design and Implementation of CAN Node Intelligent Communication Interface

Gao Qiang,Ren Dexue,Zhang Hanfeng,Wu Haiqing,Sun Jian

DOI: https://doi.org/10.1109/ccdc.2008.4598270

2008-01-01

Abstract:On the basis of established switch object model, this paper presents a hard configuration and a soft configuration of the CAN field bus intelligent communication node based on P87C591, and describes the design of software initialization of CAN controller, as well as sending and receiving process of CAN nodes. A distributed testing system has been built and CAN protocol specification compatibility of this communication node has been verified finally.
Design and Implementation of CAN Communication Interface for Air-jet Loom Controller

Jing WANG,Xu-dong HU,Yu-zhen JIN,Wei-qiang HE

DOI: https://doi.org/10.3969/j.issn.1001-7003.2010.01.009

2010-01-01

Advanced Materials Research

Abstract:A design and implementation method of CAN communication interface for Air-jet loom controller based on Win CE was presented in the article. Firstly, the hardware circus of CAN communication interface was designed. Secondly, the working principle and the development environment of interface driver were introduced, the development process of the stream interface driver based on Win CE was discussed in detail. Finally, the application program of CAN communication was developed to test the communication effect. The test results showed that the CAN communication interface based on Win CE could achieve real-time communication.

The Application of CAN-Bus in Fog Lamp Control Module

Design of Real-Time Fuzzy Controller and Application in CAN Bus Control Systems

The design of electric motor car's body network based on CAN-bus distributed control

Research on New Energy Automatic Lighting Control System Based on the CAN-Bus

The Design of Tobacco Leaf Roasting Savory Temperature & Humidity Control Node Based on CAN Bus

Applying Research of CANBUS in Real Control System

Design and Application of CAN/LIN Gateway Controller in Automotive Body Network

Design and Implementation of a Smart Networking Control System for LED Lighting Based on CAN.

Design of Building Automation System Based on CAN Bus

Design of the Control System Based on CAN-Bus of Scrap Basket Car

Design and Implementation of FCS Intelligent Control System for Greenhouse Based on CAN-Bus

The Design of AMT communication module based on CAN bus

The Control of Electric Vehicles Based on CAN Network

The Research On The Test System of CAN Bus For Electric Vehicles Based On The Software of CANoe

The Development of CAN Bus Communication for Fuel Cell Vehicle

Application design of CAN bus in tractor test bench

Application of CAN Bus System in Hybrid Electric Vehicle

Design and Analysis of Multi-Node CAN Bus for Diesel Hybrid Electric Vehicle

The Application Of An Improved Can-Bus In Flight Simulator

The Design and Implementation of CAN Node Intelligent Communication Interface

Design and Implementation of CAN Communication Interface for Air-jet Loom Controller