Abstract:Novel smart thermoplastic magnetorheological elastomer composites containing micron-sized magnetic carbonyl iron (CI) particles were prepared with a poly(styrene-ethylene-butylene-styrene) (SEBS) triblock copolymer utilized as the thermoplastic matrix rubber, and the structures and properties of the CI-SEBS composites were examined. The CI particles were uniformly dispersed in the composites prepared in the absence of the magnetic field at high temperatures T (>T\(_{\rm g}^{\rm S})\), and this isotropic composite exhibited a larger storage modulus G′ compared to the SEBS matrix at room temperature (< <T\(_{\rm g}^{\rm S})\) where the EB phase therein was rubbery while the PS phase was in the glassy state. In contrast, the SEBS composite prepared under the magnetic field (with the intensity ψ < 2.5 T) at high T (>T\(_{\rm g}^{\rm S})\) contained a chain structure of CI particles. This chain structure became longer and better aligned on an increase of ψ up to a saturation of the particle magnetization and on an increase of the time interval of applying the field (that allowed the particles to move and equilibrate their aligned structure). The modulus G′ of this “pre-structured” composite measured for both cases of ψ = 0 and ψ > 0 in the direction perpendicular to the chain structure at room temperature was enhanced compared to G′ of the isotropic composites. This difference of the filler effect (for ψ = 0) and the magnetorheological effect (for ψ > 0) between the pre-structured and isotropic composites was enhanced when the chain structure of the CI particles in the pre-structured composites became longer and better aligned. A mechanism(s) of this enhancement was discussed in relation to the morphologies (particle distribution) in the composites with the aid of a filler model and a molecular expression of the stress due to magnetically interacting particles.

The Effect of Pre-Structure Process on Magnetorheological Elastomer Performance

Study of Mechanical Behavior and Microstructure of Magnetorheological Elastomers

Effects of Particle Volume Fraction and Magnetic Field Intensity on Particle Structure of Magnetorheological Elastomers

Influence of curing time on the anisotropic microstructure of magnetorheological elastomer

EFFECT OF PRE-CONFIGURATION ON PERFORMANCE OF MAGNETORHEOLOGICAL ELASTOMERS

Effect of carbonyl iron concentration and processing conditions on the structure and properties of the thermoplastic magnetorheological elastomer composites based on poly(styrene- b -ethylene-co-butylene- b -styrene) (SEBS)

The influence of particle chain-magnetic field spatial location, frequency, dynamic strain amplitude and the prestrain on the mechanical performance of anisotropic magneto-rheological elastomer

Fabrication and Characterization of Isotropic Magnetorheological Elastomers

Influence of composition of carbonyl iron particles on dynamic mechanical properties of magnetorheological elastomers

Influence of pre-structure orientation on the linear viscoelastic limit of magnetorheological elastomers

Effects of rubber/magnetic particle interactions on the performance of magnetorheological elastomers

Preparation and Characterization of Magnetorheological Elastomers Based on Natural Rubber

Simulation on physical parameters of magneto-rheological elastomers

Mechanical and structural investigation of isotropic and anisotropic thermoplastic magnetorheological elastomer composites based on poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS)

Experimental Study and Mathematical Modeling of Magnetorheological Elastomers Considering Molecular Chain Network and Temperature Influence

Influence of particle coating on dynamic mechanical behaviors of magnetorheological elastomers

Effect of Carbon Black on the Mechanical Performances of Magnetorheological Elastomers

A study of the effect of mechanical preloads on hysteresis loop of magnetorheological elastomers

A Study of the Heat Transfer Properties of CIP Doped Magnetorheological Elastomers

The prestress-dependent mechanical response of magnetorheological elastomers

Influence of particles size and concentration of carbonyl iron powder on magnetorheological properties of silicone rubber-based magnetorheological elastomer