Preparation of Nano-crystal TiO2 Porous Thin Films and Their Photocatalytic Performance
LQ Mao,JJ Yang,QL Li,HX Dang,ZJ Zhang
DOI: https://doi.org/10.3321/j.issn:0253-9837.2003.07.017
2003-01-01
CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION)
Abstract:Nano-crystal TiO2 Sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. The aggregation of nano-TiO2 particles can be effectively suppressed by adding acrylic acid as surface modifier in the solution. Polyethylene glycol (PEG) with different relative molecular mass (1540, 6 000, 10 000, 20 000) was used in preparation of nano-TiO2 thin films, and the nano-TiO2 thin films with micro-pore structure were obtained by adding PEG as dispersing agent. Furthermore, the porosity increases with the increase of relative molecular mass of PEG. The analysis of DTA-TG indicated that the volatilizing temperature of water and solvent in the samples is about 57 degreesC, and that the decomposition and combustion temperatures of the organics in the sample are 213 degreesC and 220similar to350 degreesC respectively. XRD patterns of the samples annealed at different temperatures demonstrated that the phase transform temperature is ca 700 degreesC and the aggregation of nano-TiO2 is obviously appeared at this temperature. The proper thermotreatment temperature for nano-TiO2 as prepared is ca 600 degreesC. The photocatalytic activity of nano-TiO2 porous thin films and TiO2 powder catalyst for degradation of X-3B was investigated. The experimental results indicated that the two kinds of photocatalysts, especially powder photocatalyst, have high photocatalytic activity in photocatalytic degradation of X-3B. Moreover, the photocatalytic activity of nano-TiO2 thin films with PEG is higher than that of the film without PEG.