Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

Boundary element analysis of nanoinhomogeneities of arbitrary shapes with surface and interface effects

Spherical nano-inhomogeneity with the Steigmann-Ogden interface model under general uniform far-field stress loading

Analysis of Two-Dimensional Thin Structures (from Micro- to Nano-Scales) Using the Boundary Element Method

Size-Dependent Effective Elastic Constants of Solids Containing Nano-Inhomogeneities with Interface Stress

Interface Stress Around a Nanosized Spherical Inhomogeneity under Asymmetric Dynamic Loads

Eshelby Formalism for Nano-Inhomogeneities

Boundary element analysis for elastic and elastoplastic problems of 2D orthotropic media with stress concentration

A hybrid extended finite element/level set method for modeling equilibrium shapes of nano-inhomogeneities

Importance of surface/interface effect to properties of materials at nano-scale

A Boundary Perturbation Analysis for Elastic Inclusions and Interfaces

Interfacial stress analysis for multi-coating systems using an advanced boundary element method

Effects of Surface Elasticity on Mixed-Mode Fracture

BEM Simulation of 2D Solids with Randomly Distributed Elliptic Inclusions

Boundary Element Method For Elastoplastic Analysis Of Bimaterial, Including Interface Crack

Simulation of 2D Elastic Bodies with Randomly Distributed Circular Inclusions Using the BEM

Theory and application of fracture analysis of interface crack using BEM

Application of a Closed-Form Model in Analyzing the Fracture of Quasi-Brittle Materials

Boundary element method for problems with multiple types of inclusions

A new finite element method framework for axially functionally-graded nanobeam with stress-driven two-phase nonlocal integral model

Influence of Nanoscale Inhomogeneity Incorporating Interface Effect on Crack Nucleation at Intersection of Twin and Grain Boundary in Nanocomposite

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis