Abstract:Curing kinetics of block copolymerization thermoset polyurethane by non‐isothermal DSC method. Polyurethanes consist of hard and soft segments, with the hard segments typically comprising blocks containing isocyanate groups, while the soft segments often consist of chains terminated with hydroxyl groups. The hard segments contribute to the mechanical properties of polyurethanes, while the soft segments provide elasticity and flexibility. The essence of curing lies in the mixing of hard and soft segments and subjecting the system to high temperatures. The curing kinetics of PEG/PCL/IPDI/N100 in‐situ block copolymers were investigated using dynamic isothermal differential scanning calorimetry (DSC). Key curing parameters were obtained from non‐isothermal DSC curves, and these parameters were incorporated into an n‐order reaction model to determine the reaction type and apparent activation energy, thus deriving the reaction equation. The curing kinetics of PEG/PCL/IPDI/N100 in‐situ block copolymers follows an n‐th order autocatalytic reaction, where n is 1, and the activation energy is approximately 52.79 kJ/mol. Based on the reaction equation, the curing process conditions, namely the initial curing temperature (Ti), the peak exothermic temperature (Tp), and the finishing temperature (Tf), were deduced. Studying the curing kinetics of thermosetting polyurethanes can deepen our understanding of the interactions and reaction mechanisms between reactants under different conditions, thereby enhancing our grasp of the curing process. Furthermore, research into curing kinetics can provide a basis for optimizing preparation processes.

Study on Kinetics of Polyimide Modified EP/anhydride Curing System

Curing Behavior of Powder Coating of Polyester Resin

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Curing reaction characteristics of CE2908 polyester powder coating

Model-Fitting and Model-Free Nonisothermal Curing Kinetics of Epoxy Resin with A Low-Volatile Five-Armed Starlike Aliphatic Polyamine

Synthesis and Curing Kinetic Analysis of Eugenol-Based Siloxane Epoxy Resin

Learning about novel amine-adduct curing agents for epoxy resins: Butyl-glycidylether-modified poly(propyleneimine) dendrimers

Novel Silicone–phenyl Contained Amine Curing Agent for Epoxy Resin. 2. Isothermal Cure and Dynamic Mechanical Property

Nonisothermal reaction kinetics of DGEBA with four-armed starlike polyamine with benzene core (MXBDP) as novel curing agent

Cure Kinetics and Thermal Decomposition Behavior of Novel Phenylacetylene-Capped Polyimide Resins

Study on Curing Kinetics of Epoxy Group Silane/cyanate Ester Resin Modified with Silica Particle

Curing Kinetics of Methylene Diphenyl Diisocyanate—Based Polyurethane Elastomers

NON-ISOTHERMAL CURE KINETICS OF MESOGEN-JACKETED LIQUID CRYSTAL POLYMER PBPCS MODIFIED EPOXY RESIN

CURING KINETIC MODEL OF THE 2-ETHYL-4-METHYLIMIDAZOLE/EPOXY SYSTEM

Study on the Cure Kinetics of Middle Temperature Curing 3234 Epoxy Resin System

Cure Kinetics of Epoxy Resin Used for Advanced Composites

Curing kinetics of block copolymerization thermoset polyurethane by non‐isothermal DSC method

Curing Kinetics of DGEBA/Polyether Amine by Isothermal DSC

The Curing Kinetics Analysis of Four Epoxy Resins Using a Diamine Terminated Polyether as Curing Agent