Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

FRACTAL CHARACTERISTICS OF PARTICLE-SIZE-DISTRIBUTION-FUNCTION OF FLY ASH AND ITS IMPACTS TO SELF-ADSORPTION OF FLY ASH

Characteristics Experimental of Fly Ash Release in Combustion Process of Blended Coal

A general mechanistic model of fly ash formation during pulverized coal combustion

Mechanism on the Contribution of Coal/char Fragmentation to Fly Ash Formation During Pulverized Coal Combustion

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Test Research on Engineering Characteristic of Flyash

Size fraction characterisation of highly-calcareous and siliceous fly ashes

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

A STUDY ON BASIC CHARACTERISTICS OF FLY ASH FROM MUNICIPAL SOLID WASTE INCINERATOR IN SHENZHEN

STUDY ON THE CFB FLY ASH COMPONENTS DISTRIBUTION BY GRAVITY SOLUTION SEPARATION

Adsorption and Agglomeration Characteristics of Fly Ash Particles in Low–Low-Temperature Flue Gas Treatment Systems

A EDX Study of the Characteristics of Fly Ash and the Distribution of Heavy Metals in Fly Ash

Characterization of fly ash and unburned carbon from CFB boiler with burning Fujian anthracite

Experimental Study on Drying Characteristics of Wet Fly Ash

Research on Mineralogy Properties of Fly Ash

ADVANCEMENT OF STUDY ON FLY-ASH FORMATION AND DEPOSITION

Comparative Pollution Toxicity and Chemical Speciation of Heavy Metals in MSWI Fly Ash with Different Particle Size Distribution

IMPACTS OF UNBURNED CARBON FRACTAL CHARACTERISTIC TO ITS MERCURY SORPTION REACTION

Characteristics Analysis of Fly Ash from Domestic Waste Incineration

Influence of mercury retention on mercury adsorption of fly ash

Raman Spectroscopy and X-Ray Diffraction Analysis of the Structural Characteristics of Fluidized Bed Gasification Fly Ash