Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

An Instrument Design of High-Pressure Optical Cell and Its Implication in Experimental Research

High-pressure Optical Cell System for Online Luminescence Spectrum Research

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

A new optical capillary cell for spectroscopic studies of geologic fluids at pressures up to 100 MPa

Soft x-ray spectroscopy of high pressure liquid

Raman Spectra Based Pressure Calibration of the Non-Gauge Sapphire Anvil Cell at High Temperature and High Pressure

A multi-purpose high-pressure and high temperature gas-flow cell for operando optical Raman spectroscopy

A multi-purpose modular system for high-resolution microscopy at high hydrostatic pressure

High-pressure fluorescence measurements using a diamond anvil cell (DAC)

In situ surface enhanced Raman spectroscopy detection in high pressure solution

Study of Diamond Anvil Cell for In-Situ High-temperature and High-pressure Spectrum

Pressure Tuning Dual Fluorescence of 4-(N,n-dimethylamino)benzonitrile

Frequency-resolved Transient Absorption Spectroscopy for High Pressure System

Technical Note: A High-Temperature, High-Pressure Window for in Situ Optical Observation and Raman Detection

Hydrostaticity of pressure-transmitting media for high pressure infrared spectroscopy

A High-Precision Quartz Resonant Ultra-High Pressure Sensor with Integrated Pressure Conversion Structure

High-Temperature and High-Pressure Cubic Zirconia Anvil Cell for Raman Spectroscopy

A versatile pressure-cell design for studying ultrafast molecular-dynamics in supercritical fluids using coherent multi-pulse x-ray scattering

A Quartz Resonant Ultra-High Pressure Sensor with High Precision and High Stability

In situ measurement techniques using diamond anvil cell at high pressure–temperature conditions: A review

Pressure-resisting cell for high-pressure, high-resolution nuclear magnetic resonance measurements at very high magnetic fields