Abstract:A series of corrosion problems caused by high-temperature, high-pressure and high-acid gas environments has been an issue in oil and gas production for a long time. During the development of a high-acid gas field, the petroleum pipe is subjected to many aspects of corrosion, and the corrosion mechanism is complicated by the condition of the coexistence of H2S/CO2. Based on the study of the corrosion problem associated with the formate packer fluid in Southwest China, three kinds of steels were studied for corrosion prevention in the alloy G3/N80 steel/TP110SS steel. The study shows that the corrosion rate of the formate packer fluid is low, but corrosion is severe in environments characterized by high temperatures, high pressures and high-acid gas contents. Based on the consideration of cost and the difficulty of realization, an anti-corrosion system was constructed based on the existing packer fluid, mainly through the introduction of a variety of anti-corrosion additives. Through the selection of various additives and corrosion experiments, a corrosion protection system of formate packer fluid was developed. Corrosion tests show that the corrosion rate of the system must be less than 0.076 mm yr-1 to achieve the purpose of corrosion protection. The formate packer fluid with corrosion protection can meet the needs of the current application.

A Study on Anti-Corrosion of Body Ground Location

An Experimental Study of Antirust Additives Ratio for Green Water-Based Lubricant

Discussion of the Grounding, Electricity Leakage and Isolation Protection in the DC600 V Power Supply System

Review on Soil Corrosion and Protection of Grounding Grids

Study on the Corrosion Characteristics of Grounding Materials in Acid Red Soil

Review of Corrosion Resistant Metals for Grounding

Controlling the Electric Field Characteristics to Suppress the Clogging and Corrosion of the Continuous Casting Nozzle

Eliminate Corrosion on Grounding System by A Conductive RTV Silicone Coating

Experimental Study on EMI Gasket Shielding Performance Degradation under Corrosion Conditions

The Study Development of Corrosion in Molten Zinc Bath

CORROSION EVALUATION FOR EXISTING GROUND ANCHORED STRUCTURE

The Adjustment of Resistance of RTV Coating for Eliminating Corrosion on Grounding System

Analysis on Grounding Safety Technology

The Theory and Implementation of Corrosion Diagnosis for Grounding System

Testing and Corrosion Prevention of Stray Current

Study on the Splash Zone Corrosion Protection of Carbon Steel by Sacrificial Anode

Anticorrosion Technique Research on Tube Structure

A study on optimization of anode groundbeds for cathodic protection of deep well casings based on the boundary element method

Corrosion-resistant systems of formate packer fluid for G3/N80/TP110SS pipes at high temperature, high pressure and high H2S/CO2 ratios

Research Advances of Soil Corrosion of Grounding Grids

A corrosion study of metals in the reclaimed water