Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Analysis of Polycarboxyleta Superplasticizer Failure in Concrete with Poor-Quality Sand

A New Type of Clay Resistant Polycarboxylate Superplasticizers with a Snowflake-shaped Molecular Structure

Absorption behavior of polycarboxylate superplasticizer with different molecular structures on montmorillonite

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Effectiveness Assessment of Superplasticizer Admixtures: Case of Self-compacting Concrete Reinforced with Fine Mineral Fillers

Effect of Adding Electrolyte in Cement Paste on the Dispersing Force of Polycarboxylate-Type Superplasticizer

Effect of Functional Superplasticizers on Concrete Strength and Pore Structure

Properties of Polycarboxylate Superplasticizers with Different Molecular Structure: A Comparative Study

Adsorption and dispersion capability of polycarboxylate-based superplasticizers: a review

Research on the Impact of Polycarboxylate Superplasticizers on the Surface Roughness of Cementitious Materials

Compatibility of Polycarboxylate Superplasticizer with Cements of Different Freshness

Effects of Polycarboxylate Superplasticizers on Fluidity and Early Hydration in Sulfoaluminate Cement System

EFFECTS OF CHEMICAL STRUCTURE ON THE PROPERTIES OF POLYCARBOXYLATE-TYPE SUPERPLASTICIZER IN CEMENTITIOUS SYSTEMS

Synthesis and Application Properties of Polycarboxylate Superplasticizers

Influence of Sand-Cement Ratio and Polycarboxylate Superplasticizer on the Basic Properties of Mortar Based on Water Film Thickness

Effect of the structure of macromonomer in polycarboxylate superplasticizer on viscosity and workability of concrete

Effect of clay minerals on polycarboxylate superplasticizer and methods to improve the performance of concrete containing clay: a review

Rheological Behaviors of Fresh Cement Pastes with Polycarboxylate Superplasticizer

Study on rheological, adsorption and hydration properties of cement slurries incorporated with EPEG-based polycarboxylate superplasticizers

Evaluating the operational properties of concrete admixtures containing molecularly modified polycarboxylate superplasticizers

Synthesis and characterization on anti-clay polycarboxylate superplasticizer in concrete