Abstract:PbO glass has an adverse effect on the environment; the bismuth glass has a high refractive index, low melting temperature, softening temperature, and glass transition temperature (Tg), so that it can be used as a lead-free glass, used in optoelectronics, electronics, optics, and other components, which bismuth glass has been proved to be an important replacement material. Due to the higher melting temperature, Bi3+ ions tend to partially reduce to the low valence state of Bi0, which in turn causes coloration of the glass. In this experiment, the absorption peaks of glass oxidized brown color were observed at about 470 nm at 1,100°C (Bi2O3 = 40, 45 mol%) and 1,000°C (Bi2O3 = 40 mol%) for these three curves. The bismuth glass produced by high-temperature melting is not suitable for optical applications; by adding an oxidant (Sb2O3), which inhibits the reduction reaction of bismuth ions and maintains the ions in the state of Bi3+, the glass becomes more transparent in appearance and the transmittance is also improved and raised to approximately 75%–80%, which proves that appropriate additives are sufficient to greatly improve the application of bismuth glass for optical components. In the research process, the density and molar volume were measured by Archimedes method, Raman analysis was used to explore the influence of its structural changes, UV/Vis spectroscopy was used to measure the transmittance and absorption spectra for analysis and discussion, and TMA was used to observe the thermal properties, in the hope of developing a good optical properties of the glass, and the present experiments have confirmed that the addition of a small amount of Sb2O3 changes the color of the glass from black to a light yellow, which can be better used in the optical glass.

Linear and Nonlinear Optical Properties of Glasses Doped with Bi Nanoparticles

Linear and Nonlinear Optical Characteristics of Bismuth-Modified Lead-Silicate Glasses

Origin of Broad NIR Photoluminescence in Bismuthate Glass and Bi-doped Glasses at Room Temperature.

Bi‐Doped Glass for Photonic Devices

Predictable Tendency of Bi NIR Emission in Bi‐doped Magnesium Aluminosilicate Laser Glasses

Abnormal NIR photoemission from bismuth doped germanophosphate photonic glasses

Effect of SiO 2 on optical properties of bismuth-doped B 2 O 3 –GeO 2 –SiO 2 glasses

The Origin of the Heterogeneous Distribution of Bismuth in Aluminosilicate Laser Glasses

Linear and Nonlinear Optical Characteristics of Te Nanoparticles-Doped Germanate Glasses

New Strategy to Enhance the Broadband Near‐infrared Emission of Bismuth‐doped Laser Glasses

Effect of Si doping on near-infrared emission and energy transfer of Bismuth in silicate glasses

A New Study on Bismuth Doped Oxide Glasses

Laser-Induced Optical Property Changes Inside Bi-Doped Glass

Effect of SiO2 on Optical Properties of Bismuth-Doped B2O3–GeO2–SiO2 Glasses

Enhanced NIR photoemission from Bi‐doped aluminoborate glasses via topological tailoring of glass structure

The Study on the Decolorization and Properties of Bismuth Glass

Abnormal Luminescence Behavior in Bi-Doped Borosilicate Glasses

Large Third-Order Optical Nonlinearity of ZnO–Bi2O3–B2O3 Glass–ceramic Containing Bi2ZnB2O7 Nanocrystals

Preparation And Optical Properties Of Bi2s3 Microcrystallite Doped Glass And Thin Film

Creating and stabilizing Bi NIR-emitting centers in low Bi content materials by topo-chemical reduction and tailoring of the local glass structure

Homogeneity of Bismuth-Distribution in Bismuth-Doped Alkali Germanate Laser Glasses Towards Superbroad Fiber Amplifiers.