Rheology of Pyrite Slurry and Its Dispersant for the Biooxidation Process

Lixin Sun,Xu Zhang,Wensong Tan,Minglong Zhu,Ruiqiang Liu,Chunqiang Li

DOI: https://doi.org/10.1016/j.hydromet.2010.06.003

IF: 4.217

2010-01-01

Hydrometallurgy

Abstract:Rheology of slurry significantly influenced the grindability, fine grinding performance and energy consumption of industrial minerals in wet grinding. The solid concentration, particle size, temperature and the dispersant, which affected the theological characteristics of pyrite slurry and the biooxidation process were investigated in this study. This research aimed at the wet grinding process improved by the control of slurry rheology and getting a biocompatible dispersant.The results revealed that the viscosity increased with the solid concentration, which was in agreement with the Chong model. There was a critical concentration (40 wt.%) that led to the flow behavior of slurry transformed from Newtonian fluids to shear-thinning non-Newtonian fluids which fitted to the Casson model. It was also found that the apparent viscosity of slurry increased with the decrease of the particle size and the temperature at high solid concentration.Sodium Hexametaphosphate (SH) was selected experimentally as an effective dispersant for the mineral slurry. The appropriate concentration of SH was also determined at the range from 0.005 wt.% to 0.05 wt.%. The addition of dispersants could reduce the viscosity and yield stress, increase the zeta potential (zeta) of suspension pronouncedly. No negative effects on the growth rate of microorganisms and the pyrite biooxidation were observed. Therefore, dispersant separation and recovery process could be avoided. (C) 2010 Elsevier B.V. All rights reserved.