Abstract:A catalytic reactor model (CatReac) that describes the transport and series reactions of compounds in a three-phase fixed-bed catalytic reactor is developed for the purpose of describing the volatile assembly reactor system within the potable water processor on-board the International Space Station. CatReac includes these mechanisms: advective flow, axial dispersion, gas-to-liquid and liquid-to-solid mass transport, intraparticle mass transport with pore and surface diffusion, and series reactions of multiple compounds. A dimensional analysis of CatReac revealed the following seven dimensionless groups may be used to determine the controlling transport and/or reaction mechanisms: (1) the Peclet number is the ratio of the advective to the dispersive transport; (2) the Stanton number is the ratio of the external mass transfer rate to the advective rate; (3) the Damkohler number compares the reaction rate to the advective transport rate; (4) the surface diffusion ratio equals the rate of transport by surface diffusion divided by the rate of transport by advection; (5) the pore diffusion modulus is the ratio of the rate of transport by pore diffusion to the rate of transport by advection; (6) the ratio of the gas to liquid advective rates; and, (7) the Biot numbers for surface and pore diffusion compare the external mass transfer rate to the intraparticle mass transfer rate. These dimensionless numbers are used to evaluate the impacts of the different mechanisms on the overall performance of the reactor. The numerical solution using orthogonal collocation was validated for a wide range of controlling mechanisms by comparing model simulations with several analytical solutions: (1) Gas-to-Liquid mass transfer controlling the overall mass transferreaction mechanisms, for a wide range of Pe number values; (2) Liquid-phase dispersion controlling the overall process; (3) Liquid-to-solid mass transfer resistance controlling the overall mass transfer-reaction process; (4) Reactions in series with two possibilities (4a): No intraparticle mass transfer resistance, and (4b): Significant, intraparticle. mass transfer resistance; (5) Langmuir isotherm (5a): single compound, no mass transfer resistance, and (5b): multicomponent competitive adsorption without mass transfer resistance; (6) Unsteady state operation: Plug flow with mass transfer and no reaction. These validations systematically examine all the mechanisms that are included in the general model and examine the model limitations based on the controlling mechanisms.

Application of an Isothermal, Three-Phase Catalytic Reactor Model to Predict Unsteady-State Fixed-Bed Performance.

Cstr Model for P-Xylene Oxidation Reactor

Dynamic Mathematical Modeling of an Isothermal Three-Phase Reactor: Model Development and Validation

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

Modeling and Simulation of Commercial Catalytic Reformers

Catalytic Wet Oxidation: Mathematical Modeling of Multicompound Destruction

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Modeling of a Pilot-Scale Trickle Bed Reactor for the Catalytic Oxidation of Phenol

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Modeling for the Catalytic Coupling Reaction of Carbon Monoxide to Diethyl Oxalate in Fixed-Bed Reactors: Reactor Model and Its Applications

Simulation and Analysis of a Tubular Fixed‐Bed Fischer‐Tropsch Synthesis Reactor with Co‐Based Catalyst

The Application of CFD Methods for Modeling of a Three-Phase Fixed-Bed Reactor

Reactor Model of Counter-Current Continuous Catalyst-Regenerative Reforming Process toward Real Time Optimization

Modelling Diffusion and Reaction for Inert‐core Catalyst in Batch and Fixed Bed Reactors

An Internal Recirculation Reactor and Its Use in Studies of Heterogeneous Catalysis

Multi-zone Parallel-Series Plug Flow Reactor Model with Catalyst Deactivation Effect for Continuous Catalytic Reforming Process

Numerical Simulation of Supercritical Catalytic Steam Reforming of Aviation Kerosene Coupling with Coking and Heat Transfer in Mini-Channel

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

A conjugated heat and mass transfer model to implement reaction in particle-resolved CFD simulations of catalytic fixed bed reactors