Experimental and computational study of nonpremixed ignition of dimethyl ether in counterflow
X.L. Zheng,T.F. Lu,C.K. Law,C.K. Westbrook,H.J. Curran
DOI: https://doi.org/10.1016/j.proci.2004.08.241
IF: 6.535
2005-01-01
Proceedings of the Combustion Institute
Abstract:The ignition temperature of nitrogen-diluted dimethyl ether (DME) by heated air in counterflow was experimentally determined for DME concentration from 5.9% to 30%, system pressure from 1.5 to 3.0atm, and pressure-weighted strain rate from 110 to 170s−1. These experimental data were compared with two mechanisms that were, respectively, available in 1998 and 2003, with the latter being a substantially updated version of the former. The comparison showed that while the 1998-mechanism uniformly over-predicted the ignition temperature, the 2003-mechanism yielded a surprisingly close agreement for all experimental data. Sensitivity analysis for the near-ignition state based on both mechanisms identified the deficiencies of the 1998-mechanism, in particular, the specifics of the low-temperature cool flame chemistry in effecting ignition at higher temperatures, as the fuel stream is being progressively heated from its cold boundary to the high-temperature ignition region around the hot-stream boundary. The 2003-mechanism, consisting of 79 species and 398 elementary reactions, was then systematically simplified by using the directed relation graph method to a skeletal mechanism of 49 species and 251 elementary reactions, which in turn was simplified further by using computational singular perturbation method and quasi-steady-state species assumption to a reduced mechanism consisting of 33 species and 28 lumped reactions. It was demonstrated that both the skeletal and reduced mechanisms mimicked the performance of the detailed mechanism with high accuracy.