Abstract:Austenitic stainless steels have for some time been used as superheater tubes in the electricity generation industries in harsh environments with temperatures as high as 650°C at pressures of some 200 atm; they are expected to provide reliable service for 30 years or more. Their detailed mechanical properties are dependent on the stability of the microstructure, particularly the formation, dissolution, and coarsening of precipitates. Although the precipitation processes have been studied extensively, there remain important discrepancies. It is known that small changes in the chemical composition or thermomechanical processing can profoundly influence the evolution of the microstructure. This review focuses on precipitation in creep resistant austenitic stainless steels, in particular wrought heat resistant grades containing niobium and titanium additions. Conventional alloys such as 18–8 and 16–10 are included together with the new NF709 (20–25) and other recent variants. Precipitates forming in age hardening austenitic stainless steels are only briefly presented. Many studies have shown that MX is not a stoichiometric phase, and that chromium can be incorporated in the metal sublattice. Furthermore, the reported compositions show considerable variation. These studies are assessed and an explanation is offered, in terms of the Gibbs–Thompson effect, for the variation. A rational consideration of all the results suggests a size dependence in line with capillarity considerations. The MX phase does not form in isolation; its stability also depends on the formation of M23C6. The literature reveals that NbC is more stable than M23C6 but the case for TiC is less certain. The formation of Z phase in nitrogen bearing steels is a further complicating factor, and it is concluded that its formation is not adequately understood. This is unlike the case for M23C6, where there is consistent reporting in the literature. Finally, work on the M6C carbide in austenitic stainless steels is critically assessed. It is found that its detailed composition is not well characterised and that there are no general rules apparent about its formation. The review also covers intermetallic compounds such as σ phase. It is clear that chromium concentrations in excess of 18 wt-%, combined with a low carbon concentration, promote the formation of σ phase. This has implications particularly for steels containing niobium and titanium, both of which getter carbon. Other compounds reviewed include χ and G phases, which form at high temperatures and during very long aging such as that encountered in service.

The Evolution of Precipitates of 22cr–25ni–mo–nb–n Heat-Resistant Austenitic Steel in Long-Term Creep

New Insights of the Microcrack Initiation Induced by Mo Addition in Ni-based Single Crystal Superalloys During Creep at 900 °C

The Effect of M23C6 on the High-Temperature Tensile Strength of Two Austenitic Heat-Resistant Steels: 22cr–25ni–mo–nb–n and 25Cr–20ni–nb–n

A Systematic Investigation of Precipitates in Matrix and at Grain Boundaries in an Alumina-Forming Austenitic Steel During Creep Testing at 700 °C

Precipitate Evolution in 22Cr25NiWCuCo(Nb) Austenitic Heat-Resistant Stainless Steel during Heat Treatment at 1200 °C

Characterization of Precipitates in X12CrMoWVNbN10-1-1 Steel During Heat Treatment

Precipitation Evolution in the Austenitic Heat-Resistant Steel HR3C upon Creep at 700 °C and 750 °C

Strengthening Of An Al-Containing Austenitic Stainless Steel At High Temperature

Effect of Long-Term Thermal Aging on Microstructure Evolution and Creep Deformation Behavior of a Novel 11Cr-3W-3Co Martensite Ferritic Steel

High temperature creep behavior of a novel Cr18Ni9NbTiN austenitic stainless steel

Precipitates Change of Ferritic‐martensitic 11 % Chromium Steel under Short‐term Creep

Effect of Stress on Microstructural Evolution and Mechanical Properties of 12cr3w3co Steel During Aging and Short-Term Creep

Precipitation in creep resistant austenitic stainless steels

Exploring Carbide Evolution in Bainitic 2.25cr1mo Steel Subjected to Creep Rupture Tests

High Temperature Creep Behavior of an As-Cast Near-Α Ti–6Al–4Sn–4Zr-0.8Mo–1Nb–1W-0.25Si Alloy

Microstructural Evolution of X20CrMoV12.1 Steel Upon Short-term Creep Rupture Test

Precipitate Phases in an 11% Cr Ferritic/Martensitic Steel with Tempering and Creep Conditions

Creep behaviour and microstructural evolution of Al x CrMnFeCoNi high-entropy alloys

Creep Behaviour and Microstructural Evolution of AlxCrMnFeCoNi High-Entropy Alloys

Precipitation of Cu- and Nb-rich phases and its strengthening effect in 17Cr ferritic stainless steel during high-temperature creep process

Creep damage mechanism of 20Cr32Ni1Nb steel at high temperatures