Abstract:Explosives combustion is primarily classified into conductive and convective combustion. In situations where confinement is sufficiently strong, the instantaneous high pressure generated by convective combustion in cracks can cause rapid fragmentation of the explosive matrix, resulting in a significant increase in the combustion surface area and triggering a high-intensity reaction with potentially catastrophic consequences. Therefore, the study of convective combustion in cracks is crucial for ensuring the safety of weapons and explosives. Previous simulation studies have primarily used finite element analysis software, which has excellent performance in handling explosive detonation processes. However, its accuracy in describing gas behavior between explosives and constrained containers is limited. This study divides the combustion process of a pre-cracked explosive in a confined space into four stages based on reasonable assumptions and simplifications. We developed a simulation method that combines the Arrhenius formula with the MWSD model to model the combustion rate of the explosive. By introducing a correction coefficient, Con, to the Arrhenius formula, the formula and MWSD model control the first and third stages of explosive combustion, respectively, while smoothly transitioning during the second stage. We used this method to numerically simulate the experimental results of Shang Hailin et al. on a crack width of 50 μm. The simulation results include the temperature field and pressure field of the first three stages of explosive combustion and the pressure rise curve of the pressure measurement point at the same location, as in the experiment. The simulation results are consistent with the experimental results.

Experiment Study on Impact Damage of PBX Explosive and Simulation Material

Experimental Investigation to the Damage Localization of PBX Mechanical Failure at Mesoscale

Experimental Study on the Microstructures and Dynamic Behavior of a PBX Substitute Material

Compressive Behavior and Damage Evaluation of a PBX Substitute Material

Characterization, Modeling and Simulation of the Impact Damage for Polymer Bonded Explosives

On the Tension-Induced Microcracks' Nucleation in a PBX Substitute Material under Impact Compression Loading

Experimental and Numerical Investigation of Dynamic Damage and Load Transfer of PBX Substitute Material under Low Velocity Impact

Numerical Analysis of the Damage and Failure Behavior of Polymer-Bonded Explosives Using Discrete Element Method

Dynamic damage and non‐shock ignition behavior of polymer bonded explosive under lower velocity impact

Mechanical Property and Damage Evolution of Polymer-Bonded Explosive Substitute under Biaxial Compression

Experimental analysis and multi-scale simulation of the fracture behavior of polymer-bonded explosives based on the dynamic notched semi-circular bend method

Meso-Simulation and Experimental Research on the Mechanical Behavior of an Energetic Explosive

Fracture behavior of PBX simulation subject to combined thermal and mechanical loads

Study on Compression–expansion Behaviour of PBXs Substitutive Materials

Mechanical Behavior of a PBX Substitute Material under Static and Dynamic Loading

Mechanical Behavior of a Typical Polymer Bonded Explosive under Compressive Loads

Damage in Carbon Fiber/epoxy Resin Composites under Explosive Impact

Experimental Study on the Localized Deformation and Damage Behavior of Polymer-Bonded Explosive Simulant under Cyclic Compression

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Experimental Study on Dynamic Mechanical Properties of a Mock PBX

Multiscale Modeling for Dynamic Compressive Behavior of Polymer Bonded Explosives