Abstract:This paper presents the influence of Aluminum Nitride (AlN) nanoparticles on the electrical and material properties of epoxy resin (EP). The EP/AlN nanocomposites with different concentrations of nano-AlN fillers are prepared. The dispersion of the nano-AlN particles in the composites is analyzed by a field emission scanning electron microscope (FESEM). The electrical properties are investigated by the space charge and DC conductivity measurements, whereas the material properties are studied by Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The results show that the homo-charge accumulation appears near both electrodes during the polarization, but there are limited negative charges left near both electrodes in the depolarization for the pure EP sample. There is no space charge accumulation in the 1 wt% and 2 wt% EP/AlN nanocomposites. The electric field distortion of the pure EP sample is 20%. Moreover, the electric field distortion initially decreases with the increase of the nano-AlN content, but it increases for the 2 wt% nano-AlN sample. Temperature has a dominant influence on the DC conductivity of the EP/AlN nanocomposites comparing to the pure EP. However, the DC conductivity of the nanocomposites becomes stable at high temperatures. It is also found that the weight loss of the samples decreases with the addition of the nano-AlN and the 1 wt% nano-AlN sample has the highest glass transition temperature. It is elucidated that the high apparent mobility and activation energy facilitate the space charge transport and suppressing the space charge accumulation. Furthermore, the nano-AlN filler can increase the trap level and trap energy density of the deep traps in the sample. The dielectric loss of the EP at high frequency is reduced with the content of 1 wt% nano-AlN. Furthermore, the addition of the nano-AlN can improve the thermal stability of the EP. The 1 wt% nano-AlN sample has the superior electrical insulation and material performance amongst the tested materials.

Adhesion mechanism of steel and epoxy adhesive modified by nano-Al2O3

Effect of nano-Al2O3 on adhesion strength of epoxy adhesive and steel

The Influence of Nano-Al2o3 Additive on the Adhesion Between Epoxy Resin and Steel Substrate

The Effect of Nanoparticles on the Adhesion of Epoxy Adhesive

The Influence of Nano-AI_2O_3 Additive on the Adhesion between Epoxy Resin and Steel Substrate

The influence of nanoparticles on the adhesion strength between epoxy resin and steel substrate

Adhesion Mechanisms Between Steel and Polyethylene Modified by Nanoparticles

Influence of Nano Particles on Adhesion Strength of Polyethylene with Steel Substrates

The influence of nano-Al2O3 additive on the adhesion between enamel and steel substrate

Size-dependent Interface Adhesive Energy and Interface Strength of Nanostructured Systems

Metal Surface Nanopatterning for Enhanced Interfacial Adhesion in Fiber Metal Laminates

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Epoxy Adhesive Modified by Amino Functionalized Nano-SiO_2

The Adhesion Between Polymer Coating and Metal and Its Research Progress

Molecular Understanding of the Interfacial Interaction and Corrosion Resistance between Epoxy Adhesive and Metallic Oxides on Galvanized Steel

Effect of surface functional modification of nano-alumina particles on thermal and mechanical properties of epoxy nanocomposites

Effects of steel surface treatment with silanized carbon nanotubes on the bonding properties between steel and epoxy adhesive

Effect of carbon fibers modification on joint adhesion steel-epoxy resin-aluminum

Studies on Improving the Adherence of Sb-Mo Enamel to Steel

Review on the Research Techniques about the Adhesion Mechanisms of Metals/Polymer Coatings

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate