Research Progress of Gas Solid Phase Fluoride Catalyst

Lu Zhiyong,Liu Kunfeng,Yang Huie

2013-01-01

Abstract:Fluorinated catalyst is the core technology of gas solid-phase fluorinated reaction.It is reviewed that the gas and solid phase fluoride of catalyst study progress and the type,the results show that different types of catalytic activity features and catalytic activity of the main factors of influence.

What problem does this paper attempt to address?

Research Progress of Catalysts in Synthesis of Vinyl Fluoride by Vapor Phase Hydrofluorination of Acetylene

张迪,郭荔,林胜达,赵舯

DOI: https://doi.org/10.3969/j.issn.1006-4184.2012.09.001

2012-01-01

Abstract:Vinyl fluoride (VF) is an important fluorine-containing monomer, which is used to synthesize polyvinyl fluoride (PVF). In this paper, the research progress of catalysts in synthesis of VF by vapor phase hydrofluorinafion of acetylene was introduced.
Advance in Catalysts for Synthesis of Hydrofluorocarbons(HFCs) by Gas Solid-phase Fluorination

Liu Kunfeng,Li Yuan,Zhang Wenqing,Yang Hui-e

2011-01-01

Abstract:Fluorinated catalyst is the core technology of gas solid-phase fluorinated reaction.Gas solid-phase fluorinated catalyst preparation,molding and corresponding roasting and activate was reviewed in this paper,It was reviewed that the catalytic activity of the main factors of influence.
Advanceson improving the attrition resistance of molecular sieve catalysts for fluidized bed

Yang Jie,Liu Chuang,Yu Wanjin,Lin Shengda,Liu Wucan,Cheng Dangguo,Chen Fengqiu

DOI: https://doi.org/10.3969/j.issn.1008-1143.2023.11.004

2023-01-01

Abstract:Molecular sieve catalysts are one of the most studied fluidized bed catalysts.Molecular sieve microsphere catalysts are typically prepared by spraydrying processes,which used double aluminum-based sol,silica-aluminum composite sol,phosphorus-aluminum sol,etc.as binders in industry.The fluidized bed catalysts required not only good catalytic performance,but also superiorattrition resistance,favourable sphericity and appropriate particle size distribution to match the actual industrial manufacturing.The attri-tion resistance,particle size distribution,sphericity and catalytic performance of molecular sieve catalysts are significantly affected by the selection of binders and supports,the slurry preparation processes,the inlet and outlet temperatures of the spraydrying processes,the atomizer speed and the post-processing of the catalysts.The current research progresseson improving the attrition resistance of fluidized bed molecular sieve catalysts(FCC catalysts and MTO catalysts are taken as examplesin this paper)are summarized from three aspects including optimization of catalyst slurry components,optimization of spraydrying proces-ses and post-processing of catalysts,and provide some references for the research & development of other attrition resistant fluidized bed catalysts.
A fluorolytic sol-gel route to access an amorphous Zr fluoride catalyst: A useful tool for C-F bond activation

Franziska Emmerling,Sönke Kneiske,Ana Guilherme Buzanich,Mike Ahrens,Thomas Braun,Christian Heinekamp

DOI: https://doi.org/10.1039/d3cy01439h

IF: 6.177

2024-01-06

Catalysis Science & Technology

Abstract:A route to a ZrF4 catalyst active in room temperature Friedel-Crafts and dehydrofluorination reactions was developed via a fluorolytic sol-gel route, which was followed by a postfluorination step using a stream of CHClF2. The behaviour of different Zr(IV) precursors in a sol-gel reaction with anhydrous isopropanol/HF solution was investigated. The subsequent post-fluorination step was optimised in its temperature ramp and confirmed the necessity of a fluorination of the generated xerogels to obtain catalytic activity. The process is discussed in the context of the analysis of the materials using Brunauer-Emmett-Teller analysis (BET), powder X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The local structure of the amorphous catalyst was elucidated by extended X-ray absorption fine structure spectroscopy (EXAFS).

chemistry, physical
Advances of the research and development of solid superacid catalyst

ChangXi Miao,Zaiku Xie,Qingling Chen

1998-01-01

Abstract:The development of solid superacid catalyst was briefly reviewed. The introduction was emphasized on the trend and properties of various new catalysts. A brief description of the most promising catalysts and reactions in future was also given.
Catalyst Systems for the Hydrolysis of Chlorofluorocarbons

马臻,陶泳,高滋

DOI: https://doi.org/10.3969/j.issn.0367-6358.2003.03.014

2003-01-01

Abstract:Catalytic hydrolysis is an efficient way to dispose existing chlorofluorocarbon pollutants. The chlorofluorocarbon hydrolysis catalysts can be classified into five categories including zeolites, metal oxides, SO 2- 4/M x O y and WO 3/M x O y type solid acids, phosphates and metal sulfates. The catalytic properties, the merits and demerits of these catalyst systems are reviewed from a practical point of view, and orientations in future research are discussed.
Progress and Understanding on Catalysts with Well-defined Inter-face for Boosting CO2 Conversion

Binran Zhao,Yiyi Zhao,Peng Liu,Yulong Men,Xinyu Meng,Yunxiang Pan

DOI: https://doi.org/10.14102/j.cnki.0254-5861.2022-0024

IF: 0.847

2022-01-01

Chinese journal of structural chemistry

Abstract:Catalytic conversion of CO2 into valuable chemicals like CH3OH is the most promising way to alleviate CO2 emission for solving the serious climate change issue. Multi-component catalysts with well-defined interface show outstanding performance in CO2 conversion due to the synergistic effects and multifunctional properties caused by the well-defined interface. A discharge technique, named as cold plasma, has been recognized as an excellent strategy for tuning catalyst interface properties. The temperature of cold plasma is lower than 200 degrees C, and can be further lowered to room temperature by simply changing the operation conditions of cold plasma. The lower temperature of cold plasma can well maintain the catalyst structures, especially the porous structures. When conducting cold plasma, in addition to nontoxic working gases like Ar and air, no harmful substances are used. Cold-plasma-prepared catalysts have unique interface properties, and thereby exhibit superior performance in CO2 conversion over the catalysts prepared by traditional methods. The present review summarizes the progress about the cold-plasma-prepared catalysts for CO2 conversion, discusses the origin for the outstanding catalytic performance, and proposes the challenges and opportunities for further studies. This will stimulate more deep insights into the cold-plasma-prepared catalysts with well-defined interface properties for achieving more efficient CO2 conversion.
Effect of the Carbon Precursor on the Design of Perfluorosulfonic Acid Functionalized Carbon Catalysts

Li Cui-Can,Zhang Meng-Xiao,Hua Wei-Ming,Yue Ying-Hong,Gao Zi

DOI: https://doi.org/10.3866/pku.whxb201506012

2015-01-01

Abstract:Perfluorosulfonic acid functionalized carbon-based solid acid catalysts were prepared by liquid deposition of perfluorosulfonic acid-polytetrafluoroethylene (PTFE) copolymer using carbon nanotubes, mesoporous carbon molecular sieves, and nitrogen-doped mesoporous carbon as precursors. The obtained catalysts were characterized by N2 adsorption, thermogravimetric analysis (TG), transmission electron microscope (TEM), Fourier transform Infrared (FTIR) spectrometer, and potentiometric titration. Their catalytic behavior in the Friedel-Crafts (F-C) alkylation of anisole was also investigated. It was found that the surface area of the precursor and its interaction with perfluorosulfonic acid play important roles in the preparation of highly active catalysts. The highest activity as well as the best stability was observed over perfluorosulfonic acid functionalized nitrogen-doped mesoporous carbon.
Metal–Organic Frameworks in Solid–Gas Phase Catalysis

Cheng Wang,Bing An,Wenbin Lin

DOI: https://doi.org/10.1021/acscatal.8b04055

IF: 12.9

2018-11-28

ACS Catalysis

Abstract:Heterogeneous catalysts based on metal–organic frameworks (MOFs) have attracted significant attention in the past two decades. The well-defined structure of these molecular materials enables the rational design of catalytic centers. While early efforts on MOF catalysis mainly focused on the synthesis of fine chemicals, MOFs have recently been explored for solid–gas phase catalysis to produce commodity chemicals. In this Perspective, we summarize several opportunities in using MOFs for solid–gas phase catalysis and discuss the limitations of MOF catalysts in solid–gas phase reactions. We illustrate the use of MOFs in fundamental mechanistic studies of the industrially relevant catalysts. We attempt to identify specific solid–gas phase reactions that can benefit from MOF catalysis and also point out several scenarios where MOF catalysis is unlikely to replace current technology. We hope that our in-depth discussion and critical assessment of MOF catalysis in the solid–gas phase will promote the development of new MOF-based heterogeneous catalysts for the synthesis of commodity chemicals.

chemistry, physical
Research progress of fluorosilicone rubber

Xiwang YE,Jianhua GUO,Xingrong ZENG

DOI: https://doi.org/10.3969/j.issn.1005-3174.2017.01.014

2017-01-01

Abstract:This paper reviewed the research progress of the synthesis and properties of fluorosili-cone rubber.The anionic bulk ring-opening polymerization,ring-opening copolymerization and conden-sation polymerization of fluorosilicone rubber were introduced respectively.Some new catalysts such as rare earth solid superacid for the polymerization of fluorosilicone rubber and the blending of fluorosili-cone rubber and silicone rubber were elaborated.The effects of aviation fuel,acid medium,high-tem-perature thermal air aging,plasma and gamma radiation on the properties of fluorosilicone rubber were discussed.The development of fluorosilicone rubber was prospected.
Review on the Application of Perfluoroalkylsulfonylimides Complexes in Homogeneous and Heterogeneous Catalysis

Xiao-li ZHAN,Yong-qiang TANG,Yi-bo HE,Qing-hua ZHANG,Feng-qiu CHEN

DOI: https://doi.org/10.3969/j.issn.1003-9015.2016.02.001

2016-01-01

Abstract:Traditional liquid acid catalysts have environmental problems during their application, while solid acid catalysts have drawbacks for their low activity and short service life. Perfluoroalkylsulfonylimides complexes show a wide application in catalysis due to their special anionic structures and super acid properties. The structure and properties of perfluoroalkylsulfonylimides complexes are introduced in this review and their application as catalysts in homogeneous and heterogeneous catalysts are summarized. The development trends of perfluoroalkylsulfonylimides complexes are also discussed.
Advance in Catalytic Nitrification of Aromatic Hydrocarbons

MEI Guangquan,TAO Qi,XU Zhaoyi,XIONG Zhixing,ZHENG Shourong

DOI: https://doi.org/10.3321/j.issn:1000-6613.2007.04.006

2007-01-01

Abstract:Solid acid catalysts,including zeolites,heteropoly acid compounds,metal oxides,and solid super acid are usually used.The catalytic principle of solid acid catalyst in the catalytic nitrification was analyzed and the research progress was reviewed.
Research Progress in Hydrocracking Catalysts Developed by FRIPP

DU Yan-ze,WANG Feng-lai,SHUN Xiao-yan,LIU Chang

DOI: https://doi.org/10.3969/j.issn.1671-0460.2011.10.011

2011-01-01

Abstract:To meet the goal of the industrial clean fuels production and products quality upgrading,FRIPP(Fushun research institute of petroleum and petrochemicals,SINOPEC),actively devoted itself to develop new generation of hydrocracking catalysts.Through the exploitation of new materials and the use of new technologies and methods,FRIPP enhanced the ability to master hydrogenation metal and cognize performance of acidic carrier,then prepared new generation of high performance hydrocracking catalysts with reasonable matching of hydrogenation activity sites and cracking activity sites,such as FC-32,FC-34,FC-46 and FC-50 catalysts.
Study on experiment of synthesis of ordered mesoporous carbon materials doped with fluorine and nitrogen

Xin Yin,Jiawei Liu,Dan Zhao,Zhiming Zhou,Zeren Yang,Haiwen Wang

DOI: https://doi.org/10.16791/j.cnki.sjg.2017.07.014

2017-01-01

Abstract:By adopting a hard template method,the ordered mesoporous Kong Tan (F-N-OMC) doped with fluorine nitrogen is synthesized by using inexpensive resorcinol as carbon precursor and ammonium fluoride as a fluorine and nitrogen source.Considerable fluorine and nitrogen atoms (F: 0.35 at%,N: 2.25 at%) are homogeneously implanted in the graphitic carbon matrix with high surface area (671.3 cm2/g) and ordered mesoporous channels (6.2 nm) of FN-OMC prepared at the optimized heat-treatment temperature of 1 000 ℃.The synergistic effect of fluorine and nitrogen atoms in carbon frameworks is demonstrated to sharply polarize adjacent carbon atoms and promote the formation of the active sites of oxygen reduction reactions induced by defects.This will help to improve the performance of oxygen reduction reaction.Therefore,the FN-OMC is expected to become an efficient catalyst for oxygen reduction reaction.
Study on the Macrokinetics of Catalytic Reaction of Sulfuryl Fluoride Synthesis

Liye Qu,Bo Lu,Zhirong Chen

DOI: https://doi.org/10.3969/j.issn.1001-7631.2005.04.007

2005-01-01

Abstract:Using a fixed-bed reactor, macrokinetics of the title catalytic reaction was studied. The experiments were operated under follow conditions: temperature range 391~532 K, atmosphere. Based on the experimental data, the power law kinetics model was obtained and the parameters were evaluated by evolutionary programming. The results calculated from the model were in good agreement with experimental data and the results of statistical test showed that the model was reliable.
ZIF-8 Porous Liquids with Different Sterically Hindered Solvents and Porous Guests for Catalytic Conversion of Carbon Dioxide

Jing Zhang,Xiaoqian Li,Fangfang Su,Yangyang Xin,Dechao Wang,Yisong Liu,Dongdong Yao,Yaping Zheng

DOI: https://doi.org/10.1021/acsami.4c11776

IF: 9.5

2024-11-03

ACS Applied Materials & Interfaces

Abstract:Utilizing carbon dioxide (CO(2)) as a raw material is an effective way to reduce carbon emissions, and developing catalytic systems with high catalytic activity and stability is crucial for the efficient utilization of CO(2). Porous liquids (PLs) with both permanent pores and fluidity have great potential in the fields of catalysis, gas sorption, and storage. Nevertheless, the catalytic performance of PLs is affected by many factors; therefore, further study is needed. Herein, we proposed a...

materials science, multidisciplinary,nanoscience & nanotechnology
Evolution of Lewis acidity by mechanochemical and fluorination treatment of silicon carbide as novel catalyst for dehydrofluorination reactions

Xiaoli Wei,Yifan Wei,Jiaqin Lu,Yunfan Huang,Yiwei Sun,Yu Wang,Lijia Liu,Bing Liu,Wenfeng Han

DOI: https://doi.org/10.1016/j.mcat.2023.112948

IF: 4.6

2023-01-20

Molecular Catalysis

Abstract:Transforming potent greenhouse gasses, hydrofluorocarbons (HFCs) to hydrofluoroolefins (HFOs) is an environmentally friendly and low energy input route compared with traditional incineration method. During the conversion process, Lewis acidity of the catalysts play a vital role in the activity. Here, inspired by the fluorinated metal oxide, a novel nonmetallic catalyst SiC was fabricated via sequentially mechanochemical treatment and fluorination. With series characterizations, it demonstrated that on the super surface of SiC, there are thin layers of graphite, COOH species, SiO 2 and Si 4 C 4-x O 2 substrates. Through the mechanochemical treatment, the layers of graphite, COOH species and partial SiO 2 could be grinded off. Hence, the exposed SiO 2 residue could be removed via the fluorination by HFC-152a and HF forming volatile SiF 4 . At the same time, the transition layer, Si 4 C 4-x O 2 was fluorinated to Si 4 C 4-x F 2 accompanied with enhanced Lewis acidity. As a result, the activity of the treated SiC was significantly superior than the unmilled SiC. These findings provide a feasible way to develop the catalytic performances of nonmetallic catalysts for the dehydrofluorination.

chemistry, physical
Experimental Research on Combustion Fluorine Retention Using Calcium-Based Sorbets During Coal Combustion (II)

Qing-jie Qi,Zhi-yan Lin,Jian-zhong Liu,Xian Wu,Jun-hu Zhou,Ke-fa Cen

DOI: https://doi.org/10.1007/s12404-008-0438-x

2008-01-01

Journal of Coal Science and Engineering (China)

Abstract:During the fixed bed tube furnace combustion experimental study, stimulated the calcium-based sorbent grain size and microstructured influencing factors to explain the fluorine retention effect influence law, and expounded the combustion fluorine retention agent developing principle, and probed into the high-temperature fluorine retention agent technical approach. The results show that the calcium-based sorbent particle grain size and pore structure also have the bigger influence on the combustion fluorine retention effect, and reducing the calcium-based sorbent particle grain size and improving the calcium sorbent structure characteristics at very high temperature to enhance the fluorine retention effect is the important approach to the fluorine retention agent development.
Zirconium Fluoride-Supported High-Entropy Fluoride: A Catalyst for Enhanced Oxygen Evolution Reaction

Christian Heinekamp,Arkendu Roy,Stephanos Karafiludis,Sourabh Kumar,Ana Guilherme Buzanich,Tomasz M. Stawski,Aistė Miliūtė,Marcus von der Au,Mike Ahrens,Thomas Braun,Franziska Emmerling

DOI: https://doi.org/10.26434/chemrxiv-2024-4f99b

2024-12-05

Abstract:Extended hydrogen initiatives promote the urgency of research on water splitting technologies and therein oxygen evolution reaction catalysts being developed. A route to access a ZrF4 supported high-entropy fluoride catalyst using a facile sol-gel route is presented. The high-entropy character of the catalyst was confirmed by scanning transmission electron microscopy and energy dispersive X-ray spectroscopy (STEM-EDX) as well as inductively coupled plasma-mass spectrometry (ICP-MS). Additional investigations on the local structure were performed using extended X-ray absorption fine structure spectroscopy (EXAFS) and pair distribution function (PDF) analysis. The catalyst shows significant potential for oxygen evolution reaction (OER) in alkaline media with a current density of 100 mA cm-2 at approximately 1.60 V, thus outperforming benchmark materials such as IrO2, despite a significant reduction in electrochemical mass loading. A potential mechanism is suggested based on free energy calculation using DFT calulations.

Chemistry
A Brief Review for Fluorinated Carbon: Synthesis, Properties and Applications

Yifan Liu,Lingyan Jiang,Haonan Wang,Hong Wang,Wei Jiao,Guozhang Chen,Pinliang Zhang,David Hui,Xian Jian

DOI: https://doi.org/10.1515/ntrev-2019-0051

2019-01-01

Nanotechnology Reviews

Abstract:Fluorinated carbon (CF x ), a thriving member of the carbonaceous derivative, possesses various excellent properties of chemically stable, tunable bandgap, good thermal conductivity and stability, and super-hydrophobic due to its unique structures and polar C-F bonding. Herein, we present a brief review of the recent development of fluorinated carbon materials in terms of structures, properties and preparation techniques. Meanwhile, the applications in energy conversions and storage devices, biomedicines, gas sensors, electronic devices, and microwave absorption devices are also presented. The fluorinated carbon contains various types of C-F bonds including ionic, semi-ionic and covalent C-F, C-F 2 , C-F 3 bonds with tunable F/C ratios. The controllable designing of C-F bonding and F/C ratios play a key role to optimize the properties of fluorinated carbon materials. Until now, the potential issues and future opportunities of fluorinated carbon are proposed. The present review will provide a direction for tuning C-F bonding and F/C ratios, developing a safe and efficient fluorination method and popularizing the applications of fluorinated carbon materials.

Research Progress of Gas Solid Phase Fluoride Catalyst

Research Progress of Catalysts in Synthesis of Vinyl Fluoride by Vapor Phase Hydrofluorination of Acetylene

Advance in Catalysts for Synthesis of Hydrofluorocarbons(HFCs) by Gas Solid-phase Fluorination

Advanceson improving the attrition resistance of molecular sieve catalysts for fluidized bed

A fluorolytic sol-gel route to access an amorphous Zr fluoride catalyst: A useful tool for C-F bond activation

Advances of the research and development of solid superacid catalyst

Catalyst Systems for the Hydrolysis of Chlorofluorocarbons

Progress and Understanding on Catalysts with Well-defined Inter-face for Boosting CO2 Conversion

Effect of the Carbon Precursor on the Design of Perfluorosulfonic Acid Functionalized Carbon Catalysts

Metal–Organic Frameworks in Solid–Gas Phase Catalysis

Research progress of fluorosilicone rubber

Review on the Application of Perfluoroalkylsulfonylimides Complexes in Homogeneous and Heterogeneous Catalysis

Advance in Catalytic Nitrification of Aromatic Hydrocarbons

Research Progress in Hydrocracking Catalysts Developed by FRIPP

Study on experiment of synthesis of ordered mesoporous carbon materials doped with fluorine and nitrogen

Study on the Macrokinetics of Catalytic Reaction of Sulfuryl Fluoride Synthesis

ZIF-8 Porous Liquids with Different Sterically Hindered Solvents and Porous Guests for Catalytic Conversion of Carbon Dioxide

Evolution of Lewis acidity by mechanochemical and fluorination treatment of silicon carbide as novel catalyst for dehydrofluorination reactions

Experimental Research on Combustion Fluorine Retention Using Calcium-Based Sorbets During Coal Combustion (II)

Zirconium Fluoride-Supported High-Entropy Fluoride: A Catalyst for Enhanced Oxygen Evolution Reaction

A Brief Review for Fluorinated Carbon: Synthesis, Properties and Applications