Abstract:Freezing-thawing (F-T) cycle is one of the main reason of concrete damage in cold regions. F-T cycle mainly lead to degradation of macroscopic mechanical properties of concrete by changing the number of micropores, mesopores and macropores, and causing severely damage to its internal texture. The variations of the physical and mechanical properties of concrete sample with different inclination angle of internal flaw exposed to different F-T cycles (0, 10, 30 and 50 cycles) under unconfined compression condition was deeply investigated based on the acoustic emission (AE) and nuclear magnetic resonance (NMR) technology. The evolution of the internal cracks are tracked in real-time by AE monitoring systems during the entire test process. Meanwhile, the micro-structure of the concrete sample after F-T cycle treatment is microscopically observed with T2 distribution by low-field nuclear magnetic resonance. The results show that the peak strength of concrete decreases with the increasing F-T cycles and increases as the increasing inclination angle of prefabricated flaw. The elastic modulus decreased gradually with the increase of F-T cycles. The elastic modulus of the sample without F-T cycles treatment increases with the increase of inclination angle of prefabricated flaw. As the flaw inclination angle increases from 0° to 90°, the F-T cycles increases from 0 to 50, the peak strain shows an obvious discreteness without monotone change. When the number of F-T cycle reaches 50, concrete blocks fall off from the sample surface. A continuum damage model considering F-T damage from different pore size is finally introduced to describe the damage evolution of concrete during compression test. The research results can be used to quantitatively evaluate the strength of concrete samples treated by F-T cycle without mechanical tests.

A study on concrete frost model in view of phenomenological damage theory

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

A stochastic damage model for evaluating the internal deterioration of concrete due to freeze–thaw action

Research progress on freeze–thaw constitutive model of concrete based on damage mechanics

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Damage Evolution and Plasticity Development of Concrete Materials Subjected to Freeze-Thaw During the Load Process

Coupled Thermo‐hydro‐mechanical Analysis of Reinforced Concrete Beams under the Effect of Frost Damage and Sustained Load

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Study on Freezing-Thawing damage mechanism and evolution model of concrete

Microstructural Damage Evolution And Its Effect On Fracture Behavior Of Concrete Subjected To Freeze-Thaw Cycles

Structural behaviors evaluation of RC beam under frost damage - A methodology with meso-macro material/bond simulation and integrating into structural analysis

Concrete Failure Criterion under Freeze-Thaw Condition in Structural Engineering

Cohesive Fracture and Probabilistic Damage Analysis of Freezing–thawing Degradation of Concrete

EVOLUTION MODEL OF CONCRETE FAILURE SURFACE UNDER FREEZE-THAW CONDITIONS

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

Degradation of mechanical properties of concrete caused by freeze-thaw action

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Microstructural Damage Characterization Of Concrete Under Freeze-Thaw Action

Meso-scale mechanical model for mortar deformation under freeze thaw cycles