Abstract:Self-assembly growth of quasi-1D nanowires (NWs) has been a popular, high yield and low cost technology to fabricate ideal semiconducting channels for fin-like field effect transistors or thin film transistors (TFTs). However, a technical challenge to implementing this approach for large scale electronic applications arises from the fundamental difficulty in collecting and positioning these tiny 1D building blocks into precise locations for convenient electric connection and integration. This is particularly true when the SiNWs were grown with gas-feeding vapor-liquid-solid (VLS) approach, where the as-produced SiNWs are typically standing ones on substrate, and thus require further delicate manipulations to arrange them on planar architecture. Fortunately, this challenge can be addressed by adopting a self-assembly in-plane solid-liquid-solid (IPSLS) growth of Si nanowires (SiNWs), where a thin film of amorphous Si (a-Si) is fed as precursor layer to drive the indium (In) or tin (Sn) nano-droplets to move and produce well-defined crystalline SiNWs behind.[1] Remarkably, a precise control of the location, the growth routine and the geometry of the SiNW channels can be accomplished via a simple low temperature (<350 oC) process in conventional plasma enhanced chemical vapor deposition (PECVD) system. We will first demonstrate a reliable batch-manufacturing of parallel SiNW arrays upon glass substrates, which can serve as high mobility channels in fin-like thin film transistors (Fin-TFTs) for large area display application. Specifically, the SiNWs Fin-FETs achieve a high hole mobility of >150 cm2V–1s–1, on/off ratio >106 and excellent subthreshold swing of 120 mV/dec. In addition, the tiny SiNWs, of ~60 nm in diameter and 2 μm apart grown on glass substrate, are transparent to visible light.[2] Furthermore, we will show that the geometry degree of freedom can also be programmed during the in-plane growth of SiNWs.[3,4,5] Finally, an alloy mixture or amorphous bilayer feeding control will be presented, which can help to achieve a self-automated phase-separation and diameter modulation in a unique Si/Ge superlattice nanowire structure. There results could indicate a promising strategy to tailor the Si or SiGe nanowires for high perfomance large area electronics. References [1] L. Yu, et al., Phys. Rev. Lett. 102, 125501 (2009). [2] M. Xu et al., Nanoscale 9, 10350 (2017). [3] Z. Xue et al., Adv. Func. Mater. 26, 5352 (2016). [4] Z. Xue et al., Nature commun. 7, 12836 (2016). [5] Z. Xue et al., Nano Lett. 17, 7638 (2017)

Nanoscale Electronics Based on Two-Dimensional Dopant Patterns in Silicon

Multiple-Patterning Nanosphere Lithography for Fabricating Periodic Three-Dimensional Hierarchical Nanostructures.

CMOS Platform for Atomic-Scale Device Fabrication

Quantifying Atom-scale Dopant Movement and Electrical Activation in Si:P Monolayers

Direct atomic fabrication and dopant positioning in Si using electron beams with active real time image-based feedback

Using Nanoscale Thermocapillary Flows to Create Arrays of Purely Semiconducting Single-Walled Carbon Nanotubes

Probing limits of STM field emission patterned Si:P $δ$-doped devices

A Standard and Reliable Method to Fabricate Two-Dimensional Nanoelectronics

Deterministic deployment of in-plane silicon nanowires for high performance large area electronics

Turning Low-Nanoscale Intrinsic Silicon Highly Electron-Conductive by SiO2 Coating

3‐D Nanofabrication of Silicon and Nanostructure Fine‐Tuning via Helium Ion Implantation

Atomic-Scale Patterning of Arsenic in Silicon by Scanning Tunneling Microscopy

Fabricating 3D Si nanostructure via a novel Ga+ implantation enabled maskless dry etching process

Precise P-Type and N-Type Doping of Two-Dimensional Semiconductors for Monolithic Integrated Circuits

Deterministic Thermal Sculpting of Large-Scale 2D Semiconductor Nanocircuits

Spatial Metrology of Dopants in Silicon with Exact Lattice Site Precision

Wafer-Scale, Sub-5 nm Junction Formation by Monolayer Doping and Conventional Spike Annealing

Deterministic Single-Row-Droplet Catalyst Formation for Uniform Growth Integration of High-Density Silicon Nanowires

In-Plane Solid-Liquid-Solid Growth and Engineering of Si and Si/Ge Nanowires for Integratable High Performance Fin-like Thin Film Transistors

Terrace-confined guided growth of high-density ultrathin silicon nanowire array for large area electronics

Aligned Stacking of Nanopatterned 2D Materials for High-Resolution 3D Device Fabrication