Abstract:Thermal decomposition is a promising technology for tannery sludge disposal, as through thermal decomposition, the energy in tannery sludge could be recovered, and the abundant harmful metal chromium (Cr) could be fixed in the solid residues, which might be recycled as the chromium-rich mineral for further use. In order to provide objective evaluation on the various thermal decomposition technologies for tannery sludge disposal from safety perspective, in this study, different thermal decomposition processes of tannery sludge in typical reactors were simulated on a bench-scale equipment in laboratory, and the transformation characteristics of Cr species in tannery sludge during the processes were systematically investigated. Through characterization of the solid products of decomposition, only Cr (III) species of Cr2O3 and MgCr2O4 were determined in the pyrolysis product, while both Cr (III) species of Cr2O3 and Cr (VI) species of CaCrO4 were detected in the incineration product. For the processes of simulating gasification, when the final stage was combustion, Cr (III) species of Cr2O3 and MgCr2O4 and Cr (VI) species of CaCrO4 were observed, while when the final stage was reduction, only Cr (III) species of Cr2O3, MgCr2O4 and CaCr2O4 were observed. It was found that the Cr (III) species of MgCr2O4 generated in the pyrolysis stage has high stability and is difficult to be oxidized in the combustion stage, while Cr (VI) species of CaCrO4 produced in the combustion stage can be removed in the subsequent reduction stage. Based on the results, among the various thermal decomposition technologies to dispose of tannery sludge, pyrolysis is the safest, while incineration presents a huge risk. The adoption of downdraft gasifier is safer than that of updraft gasifier. Therefore, employing pyrolysis or downdraft gasification technology to dispose of tannery sludge is expected to fix Cr in the form of non-toxic Cr (III) in the solid residue, and then reuse it as tannery agent, so as to achieve the goal of cleaner production.

Combustion Characteristics of Tannery Sludge and Volatilization of Heavy Metals in Combustion

Combustion characteristics of sewage sludge,coal water slurry and sludge-CWS mixtures by thermo gravimetric analysis

Effect of Wastewater Treatment Processes on the Combustion Properties of Sewage Sludge

Chemical Speciation Distribution and Thermal Stability of Heavy Metals along Flue Gas Cleaning Systems in a Hazardous Waste Incinerator

Partitioning of Heavy Metals in Municipal Solid Waste Pyrolysis, Gasification, and Incineration

Chromium speciation in tannery sludge residues after different thermal decomposition processes

Sludge Acts As a Catalyst for Coal During the Co-Combustion Process Investigated by Thermogravimetric Analysis

[Thermal Analysis and the Distribution Rule of Heavy Metals During Electroplating Sludge Combustion].

Effects of temperature on the migration behaviour of arsenic and chromium in tannery sludge under CO 2 gasification

Co-combustion of Tannery Sludge in a Commercial Circulating Fluidized Bed Boiler.

The Thermal Treatment Properties of the Tars from Sewage Sludge Gasification

Effects of Temperature on the Migration Behaviour of Arsenic and Chromium in Tannery Sludge under CO2 Gasification.

Reduction of heavy metal emissions by adding modified attapulgite to sludge in bubbling fluidized bed incineration process

An Experiment Study on Distribution of Heavy Metals in the Incineration of Sludge

Study of Characteristics and Heavy Metals Migration During Co-Combustion of Coal and Sludge

Effects of hydroxyapatite addition on heavy metal volatility during tannery sludge incineration

Characterization of Zinc Vapor Condensation in Fly Ash Particles Using Synchrotron X-ray Absorption Spectroscopy

Pollutant Emissions and Heavy Metal Migration in Co-Combustion of Sewage Sludge and Coal

The Effect of Hydrolysis on Combustion Characteristics of Sewage Sludge and Leaching Behavior of Heavy Metals

Effect of Moisture on Sewage Sludge Combustion Temperature Profile and Heavy Metal Leaching

Co-combustion of Bituminous Coal and Pickling Sludge in a Drop-Tube Furnace: Thermodynamic Study and Experimental Data on the Distribution of Cr, Ni, Mn, As, Cu, Sb, Pb, Cd, Zn, and Sn