Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Flame retardant nanocomposites of polyamide 6/clay/silicone rubber with high toughness and good flowability

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Flame retardant polyamide 6/nanoclay/intumescent nanocomposite fibers through electrospinning

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Flammability and phase-transition studies of nylon 6/montmorillonite nanocomposites

A Novel Polymeric Flame Retardant and Exfoliated Clay Nanocomposites: Preparation and Properties

Effect of rubber on properties of nylon-6/unmodified clay/rubber nanocomposites

Preparation and Combustion Properties of Flame Retardant Nylon 6/Montmorillonite Nanocomposite

Study on Crystallization, Thermal and Flame Retardant Properties of Nylon 66/organoclay Nanocomposites by in Situ Polymerization

PA-6 and EVA alloy/clay nanocomposites as char forming agents in poly(propylene) intumescent formulations

Study on the Properties of Flame Retardant Polyurethane/organoclay Nanocomposite

Surface modification of glass fibers for flame retardant and reinforced polyamide 6 composites

Influences of nanoclays on the flame retardancy of fiber-filled and unfilled polyamide-6 with and without aluminum diethylphosphinate

Poly(propylene)/clay nanocomposites and their application in flame retardancy

Preparation and Properties of Halogen-Free Flame-Retarded Polyamide 6/organoclay Nanocomposite

Rubber toughened flame retardant (FR) polyamide 11 nanocomposites Part 2: synergy between multi-walled carbon nanotube (MWNT) and MMT nanoclay

Synergistic Flame-Retardant Mechanism of Dicyclohexenyl Aluminum Hypophosphite and Nano-Silica

Preparation and mechanical properties of nylon6/rubber/unmodified clay nanocomposites

Functionalized halloysite nanotubes endowing epoxy resin with simultaneously enhanced flame retardancy and mechanical properties

Improving flame resistance and shielding properties for cross-linked polyethylene (XLPE) using nanoclay filler

A polymeric flame retardant and surfactant-free montmorillonite nanocomposites: Preparation and exfoliation mechanism discussion