Abstract:Biomass has been widely used due to its environmental friendliness, sustainability, and low toxicity. In this study, aminophosphorylated cellulose (PNC), a biomass flame retardant containing phosphorus and nitrogen, was synthesized by esterification from cellulose and introduced into polyurethane to prepare flame-retardant rigid polyurethane foam. The combustion properties of the PU and PU/PNC composites were studied using the limiting oxygen index (LOI), UL-94, and cone calorimeter (CCT) methods. The thermal degradation behavior of the PU and PU/PNC composites was analyzed by thermogravimetric analysis (TGA) and thermogravimetric infrared spectroscopy (TG-IR). The char layer after combustion was characterized using SEM, Raman, and XPS. The experimental results showed that the introduction of PNC significantly improved the flame-retardant effect and safety of PU/PNC composites. Adding 15 wt% PNC to PU resulted in a vertical burning grade of V-0 and a limiting oxygen index of 23.5%. Compared to the pure sample, the residual char content of PU/PNC15 in a nitrogen atmosphere increased by 181%, and the total heat release (THR) decreased by 56.3%. A Raman analysis of the char layer after CCT combustion revealed that the ID/IG ratio of PU/PNC15 decreased from 4.11 to 3.61, indicating that the flame retardant could increase the stability of the char layer. The TG-IR results showed that PNC diluted the concentration of O2 and combustible gases by releasing inert gases such as CO2. These findings suggest that the developed PU/PNC composites have significant potential for real-world applications, particularly in industries requiring enhanced fire safety, such as construction, transportation, and electronics. The use of PNC provides an eco-friendly alternative to traditional flame retardants. This research paves the way for the development of safer, more sustainable, and environmentally friendly fire-resistant materials for a wide range of applications.

Study on the Properties of Flame Retardant Polyurethane/organoclay Nanocomposite

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Thermal Stability and Flame Retardancy of Rigid Polyurethane Foams/Organoclay Nanocomposites

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Poly(propylene)/clay nanocomposites and their application in flame retardancy

A Study on the Synthesis and Properties of Polyurethane/Clay Nanocomposites

A Novel Polymeric Flame Retardant and Exfoliated Clay Nanocomposites: Preparation and Properties

Preparation and Properties of Halogen-Free Flame-Retarded Polyamide 6/organoclay Nanocomposite

Intumescent flame retardant-montmorillonite synergism in polypropylene-layered silicate nanocomposites

Synthesis and combustion property of polypropylene/IFR/ZRP nanocomposites

Preparation and Property of Inherent Flame Retardant Polystyrene /Clay Nanocomposites

Investigation on the preparation and flame retardant mechanism of some polymer/layered compound nanocomposites

A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends

Flame retardant mechanism of organo-bentonite in polypropylene

Flame retardancy of carbon nanofibre/intumescent hybrid paper based fibre reinforced polymer composites

Preparation and properties investigation of flame‐retardant rigid polyurethane foam composites based on alkylphosphate oligomer

Flame Retardation and Char Formation Mechanism of Intumescent Flame Retarded Polypropylene Composites Containing Melamine Phosphate and Pentaerythritol Phosphate

PROGRESS OF POLYMER/LAYERED NANOCOMPOSITES APPLICATIONS IN FLAME RETARDANT

Preparation and Combustion Properties of Flame Retardant Nylon 6/Montmorillonite Nanocomposite

Thermal and Combustion Properties of Biomass-Based Flame-Retardant Polyurethane Foams Containing P and N

Nanocarbon-Based Flame Retardant Polymer Nanocomposites